|
Title: SpeedyMoto Frame Slider Install and Belt Cover Mod Post by: caffeinejunkee on August 27, 2008, 05:13:26 PM Well, I did some work this evening ;):
The install: http://www.flickr.com/photos/21858840@N03/sets/72157606987492747/ (http://farm4.static.flickr.com/3266/2803959605_2344c6589a.jpg?v=0) (http://farm4.static.flickr.com/3029/2803959791_127d6f5302.jpg?v=0) (http://farm4.static.flickr.com/3280/2803960033_2d87eae950.jpg?v=0) Title: Re: SpeedyMoto Slider Install: AKA Franken Bolts Post by: bryant8 on August 27, 2008, 05:15:47 PM nice, what about the belt covers?
Title: Re: SpeedyMoto Slider Install: AKA Franken Bolts Post by: caffeinejunkee on August 27, 2008, 05:17:45 PM nice, what about the belt covers? Thanks Belt covers up next [thumbsup] Maybe I'll get to that this Saturday. I've only been putting off for about 6 or so months. :P Title: Re: SpeedyMoto Slider Install: AKA Franken Bolts Post by: ThelmaLou on August 27, 2008, 05:20:37 PM Thanks Belt covers up next [thumbsup] Maybe I'll get to that this Saturday. I've only been putting off for about 6 or so months. :P work some magic Dremel King! Title: Re: SpeedyMoto Slider Install: AKA Franken Bolts Post by: Duc L'Smart on August 27, 2008, 05:21:14 PM Well, I did some work this evening ;): Mucho Nice [thumbsup] Title: Re: SpeedyMoto Slider Install: AKA Franken Bolts Post by: bryant8 on August 27, 2008, 05:21:39 PM I just noticed, but have you had the zip ties removed for a long while now?
Title: Re: SpeedyMoto Slider Install: AKA Franken Bolts Post by: Duc L'Smart on August 27, 2008, 05:21:48 PM work some magic Dremel King! ummm... That's what she said? Title: Re: SpeedyMoto Slider Install: AKA Franken Bolts Post by: ThelmaLou on August 27, 2008, 05:22:25 PM the sliders look 8) Hope you never need them [thumbsup] Title: Re: SpeedyMoto Slider Install: AKA Franken Bolts Post by: caffeinejunkee on August 27, 2008, 05:29:19 PM Mucho Nice [thumbsup] the sliders look 8) Hope you never need them [thumbsup] Thanks, I hope so too. [thumbsup] I just noticed, but have you had the zip ties removed for a long while now? They "hid" everything on the 695--no zip ties on the frame. Title: Re: SpeedyMoto Slider Install: AKA Franken Bolts Post by: Bonwilder on August 27, 2008, 05:32:13 PM Looks nice! [thumbsup] [bacon] [bacon]
Title: Re: SpeedyMoto Slider Install: AKA Franken Bolts Post by: fastwin on August 27, 2008, 06:03:49 PM Nice work on the sliders... good thinking on the under motor jack! [thumbsup] Got a set for the Back in Black, you have fanned the flames to get them installed. Better to have them and never need them than to need them and not have them. [bang] I repeat the sentiment... hope you never need them. [moto]
Title: Re: SpeedyMoto Slider Install: AKA Franken Bolts Post by: Slag on August 27, 2008, 06:09:38 PM Looks great. Unfortunately frame sliders destroyed my R6 at cresson [bang] They dug into the ground and flipped the bike.
Title: Re: SpeedyMoto Slider Install: AKA Franken Bolts Post by: Bonwilder on August 27, 2008, 06:13:24 PM Looks great. Unfortunately frame sliders destroyed my R6 at cresson [bang] They dug into the ground and flipped the bike. dammit man!!! Title: Re: SpeedyMoto Slider Install: AKA Franken Bolts Post by: caffeinejunkee on August 27, 2008, 06:14:57 PM Looks nice! [thumbsup] [bacon] [bacon] Love me some [bacon] after hard work... [thumbsup] Nice work on the sliders... good thinking on the under motor jack! [thumbsup] Got a set for the Back in Black, you have fanned the flames to get them installed. Better to have them and never need them than to need them and not have them. [bang] I repeat the sentiment... hope you never need them. [moto] I may have told you that the inspiration for the jack was my neighbor's friend who tried something similar without a jack...not pretty, to say the least. Looks great. Unfortunately frame sliders destroyed my R6 at cresson [bang] They dug into the ground and flipped the bike. Dang, not good... :-\ Title: Re: SpeedyMoto Slider Install: AKA Franken Bolts Post by: Slag on August 27, 2008, 06:18:11 PM dammit man!!! Was worth it for the rebirth Apologies for the threadjack [beer] (http://catie.smugmug.com/photos/322973722_5wgu6-M.jpg) Title: Re: SpeedyMoto Slider Install: AKA Franken Bolts Post by: Duc L'Smart on August 27, 2008, 06:18:28 PM Here at the WareHome, we've been using a scissor jack & a block of wood underneath the motor, whilst the bike is on the lift, for quite some time with tremendous success.
Title: Re: SpeedyMoto Slider Install: AKA Franken Bolts Post by: Bonwilder on August 27, 2008, 06:20:39 PM Title: Re: SpeedyMoto Slider Install: AKA Franken Bolts Post by: fastwin on August 27, 2008, 06:29:26 PM Sweet... Jap bikes on a Ducati board. Nice! [thumbsup] A man after my own heart. [moto] [bacon]
Title: Re: SpeedyMoto Slider Install: AKA Franken Bolts Post by: svoloch on August 27, 2008, 06:30:31 PM Was worth it for the rebirth Apologies for the threadjack [beer] (http://catie.smugmug.com/photos/322973722_5wgu6-M.jpg) yep. that's hot looking. no doubt about it.... Title: Re: SpeedyMoto Frame Slider Install and Belt Cover Mod Post by: caffeinejunkee on August 30, 2008, 10:30:10 AM Well, I finally cut my belt covers today:
(http://farm4.static.flickr.com/3276/2811027447_8f03929722.jpg?v=0) (http://farm4.static.flickr.com/3028/2811872666_6365b332da.jpg?v=0) Title: Re: SpeedyMoto Frame Slider Install and Belt Cover Mod Post by: BarneePhife on August 30, 2008, 10:32:11 AM Well, I finally cut my belt covers today: Mucho nice there CJ!!! Mikey likes it! Title: Re: SpeedyMoto Frame Slider Install and Belt Cover Mod Post by: bryant8 on August 30, 2008, 11:14:46 AM That looks real good. Did you ever use that rear hugger I gave you?
Title: Re: SpeedyMoto Frame Slider Install and Belt Cover Mod Post by: caffeinejunkee on August 30, 2008, 11:34:44 AM Mucho nice there CJ!!! Mikey likes it! That looks real good. Did you ever use that rear hugger I gave you? Thanks I was thinking about the hugger today. The issue is that when I tried to take off the stock, I stripped out one of the bolts. I'll have to drill it out, I think. I'm on a roll, and that one should be done soon. [thumbsup] Title: Re: SpeedyMoto Frame Slider Install and Belt Cover Mod Post by: ThelmaLou on August 30, 2008, 11:38:02 AM Mucho nice there CJ!!! Mikey likes it! +1 [thumbsup] Did it go how you expected? Title: Re: SpeedyMoto Frame Slider Install and Belt Cover Mod Post by: caffeinejunkee on August 30, 2008, 11:41:09 AM +1 [thumbsup] Did it go how you expected? Nope, but it never does.... :P I tried cutting the radius of the first one with the Dremel after using it for the straights, but I wound up using a saber saw--much cleaner. Other than that, it really came out nicely. [thumbsup] Title: Re: SpeedyMoto Frame Slider Install and Belt Cover Mod Post by: ♣ McKraut ♣ on August 30, 2008, 01:00:17 PM all that cutting!! the horror!! blasphemy!
j/k man, looks great...and a weight savings! the real question is: are you missing your british mistress? Title: Re: SpeedyMoto Frame Slider Install and Belt Cover Mod Post by: Duc L'Smart on August 30, 2008, 03:51:53 PM Lookin' good, CJ [thumbsup]
Title: Re: SpeedyMoto Frame Slider Install and Belt Cover Mod Post by: caffeinejunkee on August 30, 2008, 06:38:01 PM ...the real question is: are you missing your british mistress? *** got sloppy seconds :P Title: Re: SpeedyMoto Frame Slider Install and Belt Cover Mod Post by: ♣ McKraut ♣ on August 30, 2008, 06:47:03 PM i see you have a new movie coming out.... babylon AD? looks intense
Title: Re: SpeedyMoto Frame Slider Install and Belt Cover Mod Post by: DFUSEME on April 06, 2011, 12:44:04 AM CaffineJunky, Thanks for posting up the how to on the frame slider install! I just installed these on my girlfriends bike. Easy as PIE and they look great! fork sliders are next!!!
(http://img822.imageshack.us/img822/4158/photo1ap.jpg) (http://img822.imageshack.us/i/photo1ap.jpg/) (http://img849.imageshack.us/img849/1081/photo2gj.jpg) (http://img849.imageshack.us/i/photo2gj.jpg/) (http://img848.imageshack.us/img848/2709/photo3s.jpg) (http://img848.imageshack.us/i/photo3s.jpg/) Title: Re: SpeedyMoto Frame Slider Install and Belt Cover Mod Post by: caffeinejunkee on April 06, 2011, 03:10:23 AM CaffineJunky, Thanks for posting up the how to on the frame slider install! I just installed these on my girlfriends bike. Easy as PIE and they look great! fork sliders are next!!! Cool! Glad the pics were helpful. [thumbsup] Title: Re: SpeedyMoto Frame Slider Install and Belt Cover Mod Post by: DFUSEME on April 16, 2011, 01:04:24 AM Matching fork sliders are done! Girlfriend put them on as I was working on the fender eliminator kit! Speedymoto stuff rocks!!!
Next are the Woodcraft rearsets! Woooot! |