|
Title: Ducati Performance DP ECU interchangability? Post by: vw151 on October 27, 2008, 10:19:39 AM Does anyone know what works with what. I have an S2R 1000 with the 1000ds motor. Someone is selling an un-red keyed ECU from a 1000DS but does not specify the bike it's from. I suspect it's from a 1000DS Multistrada with termis on it. Will this work fine. Does anyone have experience with this. If it will work, will it need tuned. If it needs tuned can I tune it or do I have to have a dealer do it?
Let me know what you guys think. Title: Re: Ducati Performance DP ECU interchangability? Post by: He Man on October 27, 2008, 01:20:05 PM i dont think there would be any issues at all. people have even used an HM ECU on a S2R1000 (though there were some ECU issues, but the guages are completely different on the 2 bikes so that would be the answer to the problem)
People have used S2R800ECUs (which works with PCIIIs) on 695s and threw on a PCIII. Title: Re: Ducati Performance DP ECU interchangability? Post by: DucSteve on October 27, 2008, 01:37:07 PM I heard they could be a problem Reusing a ecu from a bike that had it installed already. Like, the chip in the key and the ecu got synced up
Title: Re: Ducati Performance DP ECU interchangability? Post by: Ducnial on October 27, 2008, 03:19:35 PM I heard they could be a problem Reusing a ecu from a bike that had it installed already. Like, the chip in the key and the ecu got synced up Read " un-red keyed ECU " Title: Re: Ducati Performance DP ECU interchangability? Post by: Monstermash on October 27, 2008, 05:55:10 PM I wouldn't attempt to use an ECU intended for a HM or a Multi. Both of those bikes have digital speedos and will cause problems if used in your S2R1K.
You can use one designed for any 1000DS motor that has a stepper motor and an analog speedo. I have one on my bike from a sport classic. If you're unsure of which bikes have the stepper motor just look at the left handlebar controls. If there is a fast idle adjustment lever it doesn't have the stepper motor. Title: Re: Ducati Performance DP ECU interchangability? Post by: killerniceguy on October 28, 2008, 05:01:31 AM Slight thread jack - I have a S2R800 with the fast idle. Other than the fast idle are there many signigicant differences between the stepper and what I have, or is it just a small evolution in the motor? I wouldn't attempt to use an ECU intended for a HM or a Multi. Both of those bikes have digital speedos and will cause problems if used in your S2R1K. You can use one designed for any 1000DS motor that has a stepper motor and an analog speedo. I have one on my bike from a sport classic. If you're unsure of which bikes have the stepper motor just look at the left handlebar controls. If there is a fast idle adjustment lever it doesn't have the stepper motor. |