Hi All,
I just noticed that the speedo on my 2006 S4R was reading "high" by almost 8+ MPH thru the whole range. Then I noticed that at "rest" it reads 8 MPH @ a dead stop. Which is to say it doesn't seem to return to rest at 0 like it should. Has anyone experienced this and is there a reasonable fix to readjust the gauge needle?
Thanks
Dan
My wife just read the subject and thought it might be about
a swimsuit mishap ;D
You should feel lucky that it's only 8 mph. The speedometer on my 888 is off a full 20%. If it says I'm doing 100, I'm really doing 80.
The only thing I know of is to send it somewhere like Palo Alto Speedometer and have them calibrate it.
This may be a stupid Question. But are the spedo housings "sealed"?? I thought I could open it up and manually adjust it.
Mine is also wildly optimistic. Does anyone know if the tach is accurate? If so, you could probably work out a correction factor pretty easily.
Quote from: vt duc on May 10, 2008, 04:06:34 PM
This may be a stupid Question. But are the spedo housings "sealed"?? I thought I could open it up and manually adjust it.
The only way to get inside is to cut the plastic.