Ducati Monster Forum

Kitchen Sink => No Moto Content => Topic started by: That Nice Guy Beck! on January 20, 2009, 07:30:37 PM

Title: tire pressure???
Post by: That Nice Guy Beck! on January 20, 2009, 07:30:37 PM
anyone know the proper tire pressure for a ford e250 with a ducati in the back?
heck I dont even know the tire pressure without the ducati in the back, thanks
Title: Re: tire pressure???
Post by: ducpainter on January 20, 2009, 07:32:31 PM
Quote from: That Nice Guy Beck! on January 20, 2009, 07:30:37 PM
anyone know the proper tire pressure for a ford e250 with a ducati in the back?
heck I dont even know the tire pressure without the ducati in the back, thanks
It's on a label on the right door jamb.
Title: Re: tire pressure???
Post by: mitt on January 20, 2009, 07:37:34 PM
Quote from: ducpainter on January 20, 2009, 07:32:31 PM
It's on a label on the right door jamb.

+1

And, for a 400lb bike, it isn't going to make a bit of difference for a 3/4 ton pickup.

mitt
Title: Re: tire pressure???
Post by: ducpainter on January 20, 2009, 07:39:36 PM
Quote from: mitt on January 20, 2009, 07:37:34 PM
+1

And, for a 400lb bike, it isn't going to make a bit of difference for a 3/4 ton pickup.

mitt
'zactly
Title: Re: tire pressure???
Post by: That Nice Guy Beck! on January 20, 2009, 07:44:22 PM
door jam huh, kewl, thanks
Title: Re: tire pressure???
Post by: herm on January 20, 2009, 08:42:07 PM
figure about 10-12 psi less than the max (which is roughly where it should be without the bike too)
Title: Re: tire pressure???
Post by: Howie on January 20, 2009, 09:58:49 PM
Quote from: ducpainter on January 20, 2009, 07:32:31 PM
It's on a label on the right door jamb.

Unless some painter painted over it :P
Title: Re: tire pressure???
Post by: ducpainter on January 20, 2009, 10:20:08 PM
Quote from: howie on January 20, 2009, 09:58:49 PM
Unless some painter painted over it :P
He wouldn't do it...

Unless the B-pillar has been replaced you must mean.   ;D