Print Page - Exhaust clamp for old remus cans

Title: Exhaust clamp for old remus cans
Post by: Ademoraes on January 21, 2009, 09:21:52 AM

Hi everyone! Just bought a 2005 M1000s and it came with a set of Remus Titanium high mount cans. However, the clamps are missing. I contacted a Remus rep and he told me that these cans were produced by Remus for Ducatis in the mid 90s. I'm trying to get a pair of replacement clamps to put on these cans. I don't like the idea of them just hanging there and causing stress on the exhaust pipes below. Can anybody give me some input on replacement clamps that would work with these cans? Thanks!

Title: Re: Exhaust clamp for old remus cans
Post by: Howie on January 21, 2009, 12:13:36 PM

Any clamp that is the proper diameter will work.

Title: Re: Exhaust clamp for old remus cans
Post by: Capo on January 21, 2009, 01:18:36 PM

Check with He Man, he says all this stuff is available from JC Whitny

Title: Re: Exhaust clamp for old remus cans
Post by: Ademoraes on January 21, 2009, 02:17:44 PM

Thanks! I'll check JC's website to see if they have anything that will work.

Ducati Monster Forum

Moto Board => Tech => Topic started by: Ademoraes on January 21, 2009, 09:21:52 AM