Ducati Monster Forum

Here are a few pics of the Lego graphic installed on an AGV stealth.  The vinyl will be printed oversize so that you can trim it to your helmet for a truly custom fit. 

Submit your vote and post any comments or concerns you have.

The official thread and details found here:  http://ducatimonsterforum.org/index.php?topic=19030.0 (http://ducatimonsterforum.org/index.php?topic=19030.0)

(http://images2d.snapfish.com/232323232%7Ffp53676%3Enu%3D3386%3E5%3B9%3E668%3EWSNRCG%3D323%3A47%3B78%3A%3C79nu0mrj)

(http://images2c.snapfish.com/232323232%7Ffp53655%3Enu%3D3386%3E5%3B9%3E668%3EWSNRCG%3D323%3A47%3B78%3A%3C%3A9nu0mrj)

(http://images2d.snapfish.com/232323232%7Ffp5368%3B%3Enu%3D3386%3E5%3B9%3E668%3EWSNRCG%3D323%3A47%3B78%3A%3C7%3Anu0mrj)

(http://images2d.snapfish.com/232323232%7Ffp53675%3Enu%3D3386%3E5%3B9%3E668%3EWSNRCG%3D323%3A47%3B79%3B365nu0mrj)

(http://images2c.snapfish.com/232323232%7Ffp53645%3Enu%3D3386%3E5%3B9%3E668%3EWSNRCG%3D323%3A47%3B79%3B358nu0mrj)

(http://images2d.snapfish.com/232323232%7Ffp53684%3Enu%3D3386%3E5%3B9%3E668%3EWSNRCG%3D323%3A47%3B79%3B339nu0mrj)

(http://images2c.snapfish.com/232323232%7Ffp53662%3Enu%3D3386%3E5%3B9%3E668%3EWSNRCG%3D323%3A47%3B7%3B7778nu0mrj)
(http://images2d.snapfish.com/232323232%7Ffp53679%3Enu%3D3386%3E5%3B9%3E668%3EWSNRCG%3D323%3A47%3B7%3B777%3Cnu0mrj)
(http://images2d.snapfish.com/232323232%7Ffp5368%3A%3Enu%3D3386%3E5%3B9%3E668%3EWSNRCG%3D323%3A47%3B7%3B7783nu0mrj)
(http://images2d.snapfish.com/232323232%7Ffp53677%3Enu%3D3386%3E5%3B9%3E668%3EWSNRCG%3D323%3A47%3B7%3B7784nu0mrj)
(http://images2d.snapfish.com/232323232%7Ffp53679%3Enu%3D3386%3E5%3B9%3E668%3EWSNRCG%3D323%3A47%3B7%3B7785nu0mrj)
(http://images2c.snapfish.com/232323232%7Ffp5365%3B%3Enu%3D3386%3E5%3B9%3E668%3EWSNRCG%3D323%3A47%3B7%3B7787nu0mrj)

 [clap]   [thumbsup]

That is awesome.

That looks awesome in the dark! Nice work!  [thumbsup]

I think the eyes are a bit too big, and the whole face is a bit spread-out. Kinda makes it look like the Wal-Mart Smiley.

Otherwise, it looks good and thanks for all the work you've done thus far.

Every time I look at it - it REALLY makes me laugh  [laugh]

It's pretty close - close enough to match the scale of a helmet; which is most important anyway.

(http://farm3.static.flickr.com/2122/2095801400_ea561be8e0.jpg)


Nice work!  [thumbsup]


Makes me laugh too!!!  [laugh]

+1 but as written...  only slightly too big.

Holy crap that's cool.

My opinion is that the eyes/mouth are too large, by pretty much actually.

Also, maybe the yellow shouldn't extend quite as far back, as in not covering the whole visor.

modest 0.02

 [laugh] [laugh] [laugh]

(http://www.filesavr.com/second/a2fd55f4c53fab847ac6be32ad63fe7c.jpg)

This would look awesome!!!


...I should get back to work...  [cheeky]

This is turning out better than I had imagined.  Only one small suggestion though - The eyes and smile might be a little too big.  Size them down a bit would give you a better comparison to the Lego Minifig.  OTHERWISE, IT'S AWESOME!!!!!!   [thumbsup]

(http://photo.bldesign.org/photos/misc/classiclego.jpg)

I can't stop myself from laughing.  Just can't wait to get my hands on a set of it!

BastrdHK - Did you get any funny looks from people when you were out riding?

you know that really is a hoot


what kind of price are we looking at ?

Thanks fellas,

This has been fun to work on for you guys....enjoying the feedback! 

Yes, we definitely had peoples attention, I was ahead of him in a cage, and watched as people turned to see him coming.  When we stopped for shots he said he could not believe how many looks he was getting.  Several people commented as we took photos.  One guy said, "I like it.....its like...'Have a nice day, and lets f%#$ing ride!'.....cool!"


I tend to agree about the face being a little large, but the scale fits the rider/helmet much better when riding, and when you see it from another car on the road.  I will scale it down and deepen the yellow a bit.


I will apply it to an Arai tomorrow where the visor does not extend back as far.  However, I am going to leave the vinyl over sized so the individual can trim it to taste.

(http://www.filesavr.com/second/a2fd55f4c53fab847ac6be32ad63fe7c.jpg)

Haha....love it!......EXTREME VISIBILITY!

$25 to your door

...um, I'm pretty sure I'm gonna look exactly like this after I order mine. 

That's really cool.

[OT]
HOLY CRAP! What is Ryan doing out of AZDRA?
[/OT]

I like it.  Very nice work, HK!


Perfect.  With a (slightly) smaller 'face' and a deeper yellow background it should be just right.   I also like your plan to allow enough material so we can trim them to fit our shields. [thumbsup]

Is the yellow reflective?  I saw the nighttime pic, but I can't tell if it's bright because of the camera flash or because it's truly a reflective material.

For $25 "to our door" I think you've done a marvelous job.  Count me in for one when you're ready to take orders.

Man I can't  wait! I need one for me and one for the Mrs., to be a lego couple

Thanks for the comments guys!  They really help the design process and so do a couple of these  [drink] 

The current product I have sourced (Oracal 260F) is not reflective.  After the first batch I am going to try and get my hands on some reflective, no one seems to carry it.  I have found a supplier in China, but I am not keen on their material.   Oracal and 3M are premium products with ratings that are probably overkill for our application, but its much more consistent and easier to work with. 

I think it's cool.  You had me laughing at all the images, but if you are going for the lego figure face I think the image at the top more closely matches the lego faces in the middle in comparison to the one at the bottom.
I think the mouth is too wide, the eyes are too big and the mouth and eyes  are too far apart.  Although I was just thinking that where you have the eyes placed may make it easier to see.  Can you see through that?  How about at night?

(http://cache.gawker.com/assets/images/2009/02/custom_1233943325072_lego-cycle-helmet.jpg)
(http://photo.bldesign.org/photos/misc/classiclego.jpg)
(http://images2c.snapfish.com/232323232%7Ffp53645%3Enu%3D3386%3E5%3B9%3E668%3EWSNRCG%3D323%3A47%3B79%3B358nu0mrj)

i think part of the side should be in black to match the helmet....as you can see with the sample red and yellow face, his sides are red to make the face window look smaller... it is still hilarious... i would love to get one, as soon as i make a decision on a new helmet... [wine]

That's the design of the helmet, not the mask.

(http://www.viewpoints.com/images/review/2007/153/13/1180810174-90908_full.jpg)

Look at the helmet on the left. Plastic covers over the hinge mechanism, painted to match the rest of the helmet.

Still want one, it's hilarious.

Other emoticons would be cool too.

I think if the scale stays the same but the mouth moves slightly closer to the eyes vertically it'd be perfect but I'm pretty happy with it the way it is. :)

i want one.  it may be difficult to intimidate drivers on the freeway, but it will still be fun

I like and will order one no matter how it comes out. BUt, I think the eyes and mouth are a bit too far apart/big.

Just tell me how to order.  I'm in.

 [laugh] Love it! I agree that the eyes and mouth are probably just a tad big, but I definitely want one.  [thumbsup]

Add me to the "scale's too large" camp.

It's lookin' very promising though.   [thumbsup]

BastardHK,  [clap] I'm glad you stepped in to offer your services! This product looks MUCH better then the competitor and for only a slight bit more! I trust your instincts on the selection of a quality material!


I think it would be much better if you placed a dot dead center and pulled everything in about 1/2" -1" and shrunk things to compensate!


oh and HOLY CRAP YOUR TALL MAN!!! your sitting on that thing like i sit on my 25" work stool!

Maybe here's a few options for future versions.  Maybe do one just for the ladies like the last one in the second row.

(http://www.walyou.com/img/lego-figures-timeline.jpg)

Maybe with we could be more like this

http://www.youtube.com/watch?v=muaAZE0M3LU (http://www.youtube.com/watch?v=muaAZE0M3LU)

Is it order time yet?

+1, with a minor change it will be perfect.

[thumbsup]

 [thumbsup]

Wow that's friggin cool!  [bow_down]
When are they gonna be ready? I don't have paypal anymore I had some problems with them can I send you a check?

OK... when I saw this initially.. I thought it was stupid..

Then when I saw it installed on that AGV... OMG i think i want one now...  thats hilarious  [clap] [bow_down]

Working on getting the graphic finalized right now.  I will post up with order details once it is finished.  I will be out of town and away from internet access until Tues.   I am going to push to get the graphics printed and setup an order process today so we can start shipping these out Tues. when I get back.

OMG!

WANT!

LET'S SEE THE FINAL PRODUCT!!!!

The more I look at it the funnier it gets..  [clap]

love it, only thing is can you see to your sides in traffic and at night? how much?
Jay

This is coming along awesome!  I'll be in for one, or maybe two  [thumbsup]

Jay,

The entire graphic is perforated, so your field of view is the same.  This should only be used with a clear or slightly tinted shield.  I strongly advise against using it in low visibility conditions/at night.

$25 shipped

The graphic has been modified to reflect the changes many requested.

Initial design

(http://farm4.static.flickr.com/3349/3294185907_5568e06823.jpg?v=0)

Modified design

(http://farm4.static.flickr.com/3459/3294186825_ba354b29c9.jpg?v=0)

The initial batch will be ordered tomorrow.  I will be out of town until Monday.  The first shipments will go out Tuesday afternoon.

PAYPAL users send funds to williford112000 at yahoo.com

Make sure your shipping and contact info are up to date!

*** INCLUDE YOUR DMF SCREEN NAME***

This will help me keep everything organized  [roll]

Or send checks to:

Will Fulford
66 Clemson St
Charleston, SC
29403

***Again make sure to include your shipping address and DMF screen name!***

Obviously checks will take a little longer to process, but no worries.

INTERNATIONAL BUYERS

Shipping will cost extra depending on final destination and customs forms a plenty.....you know the drill  [coffee]

PM me if you want to organize a bulk shipment to one country to save some money.

Thanks again guys,

- HK

Now I have to find a yellow helmet to buy.

 [laugh]

Squash is hot baby!  8)

Payment sent... I included my updated address in the note along with it.. paypal was being screwy and wouldnt let me update... PM me if the note didnt go through properly

I'm in - My $25 was sent via PayPal.

Thanks!!!!

Payment sent and now waiting impatiently....  [laugh]

is it here yet??

order sent.. Hope you deliver...

I would hate to have to sick my USPf .40 on you.  ;D

(kidding of course)

Payment sent.  ;D

payment sent .............via  paypal


added $5 extra for Canada shipping


thanks

awesome....


I'll be sending a check for 2 via snail mail!

check for 2 from bank sent.

Now, to order a new shield.

cash sent via paypal.

Paypal'd   [thumbsup]

Payment sent, now yo look for those visors on the road....

Looks like I missed the initial order....When's the next batch?

Hey fellas,

Just got back in front of a computer.  It looks like just over 30 are spoken for, so there are still plenty available. 


I think my USP Tactical .45 would have to retort  8)

I am compiling a list of all the members that I have received/pending receipt of payment from.  Check back tomorrow and make sure I have not missed anyone.  The first orders will be shipped tomorrow afternoon.

- Will

will be sending loot tonight for 2

PP sent for 1


Thanks!

Paypal sent for 2!

 Excited!

moolah sent for 2  ;D

count me in for one!

 :)

paypal sent.  thanks for putting this all together!

Payment sent by PayPal just now. My wife thinks this is so cool she is paying for it for my birthday.

The Doc

paypal payment sent

No fair! I live in CA... (No threaded barrels allowed)  :-\

payment sent for 2!  i think i need to get some red helmets for these!

Payment coming tonight when I get back home.....can you PM me what you need for shipping to Australia  [thumbsup]

Here is a list of people who have submitted their orders.  If you do not see your DMF tag, you see an error with your order, or you have a question please PM me so we can get it sorted.

Paid:

He Man - 1
Rameses - 2
DLSGAP - 1
duclvr - 1
slowbird - 2
bluemoco - 1
Goat_Herder - 1
Sally101 - 1
Evilsteve - 1
Darth Paul - 2
ute - 1
extra330 - 1
billruiz - 1
monster monkey - 1
McKraut - 1
Maxdb - 1
trenner - 1
900FE_79 - 1
Mika - 1
S2R800 - 2
Paradux - 1
GotDuc - 2
dansamp - 1
ostagbajer - 1
Doctor Woodrow - 1
mlondre - 1


Pending:

Slowpoke13 - 2
Carlsberg - 1
Le Pirate - 2

I want to make sure all the DMFers (ha..makes me laugh every time) are taken care of.  I have received a few payments with no DMF handle, so I will list them under Non DMF Paid.  Again, check your status, and PM if you see any discrepancies!

Non DMF Paid:

RB of San Diego - 1

That is 32 paid for with 5 pending.  Only 13 left!

How many of you guys will be able to get together for a group photo?  [moto]

anyone in or around san antonio?

I will send the check to you tonight

I haven't seen any other orders from Oz, but I know several were interested.  Maybe you guys can get together and split shipping.  If not, give me your address and I will get a quote.

Just sent a Paypal for mine...  I'm so pumped!!!!!!!!!!!!! [drink]

i want mine nowww(like arnold).  [evil]  ;D

]

That's me.

Put me down for one. It'll be via Paypal as soon as the fund cleared this Friday. Thanks

Have any left? I would love to have 2 to be paid with a check.
Thanks!

ill take 2 via paypal!!

paypal sent for 2!

Paypal sent for 1  :)

I want one. I'll send a check after work.

Thanks guys!  Everything is going smoothly so far.  I have enjoyed all the support and comments.  I would like to remind everyone who started this whole thing..... [bacon] roll..... He Man....... he deserves a big round of  [clap] for bringing this to our attention.  I could not imagine doing a project like this for a better group of people.  I am blown away by the quality of people this board attracts.  It has been a real pleasure!

The graphics are being laminated as I type, and the first shipments will go out tomorrow.  International buyers I am still working on your shipping quotes and will PM you individually with a total.  I am writing the installation guide, and will post it before anyone gets their visor vinyl.

I appreciate your patience!

I have received everyone's payments that were sent via PayPal, and I will continue to update the list.  Again, include your DMF screen name, so I can keep accurate records.  If you would like to use a check, no worries.

Send the check to:

Will Fulford
66 Clemson St
Charleston, SC 29403

I'll paypal ya for one later today  [thumbsup]

Is there a post with an updated list?

I can't wait to slap this sucker on... should i put it on the tinted or clear shield? 

As far as application goes, would applying heat help with the curves?  Ive gotten pretty decent at applying vinyl to other things but ive never tried perforated vinyl which may react differently. 

Also, too bad we arent all located in the same area, i would be so down to go on a group ride with our lego face shields  [beer]

I'm in Wichita Falls...I'll meet you half way  [laugh]



I'm going to have to wait until the 1st to mail you a check...Still waiting for the box of new ones from the bank. Funny thing happend...I put my wife's name on my bank account and suddenly I'm out of checks  ???

odd how that happens....

I remember BastardHK mention about low visibility with vinyl+tinted shield at low light condition.  Putting it on your clear shield might be the way to go, IMO.

INSTALLATION GUIDE FOR VINYL VISOR GRAPHIC:

***Use this material on a clear or slightly tinted visor at your own risk!***

***DO NOT USE AT NIGHT OR IN LOW VISIBILITY CONDITIONS***

(I don't need a lawsuit....besides there isn't much to take anyway)

You will need a clean, dry visor, an XACTO knife(preferred and can be found at your local arts and crafts store/hobby shop for $3) or razor knife, hair dryer or heat gun, a squeegee or credit card, and lots of patience!

1. - Clean your visor with mild soap and water.  Dry the visor with a soft cloth so that no dampness or residue is
      left behind.

2. - Attach the visor to your helmet and secure the helmet, so that it will not move during installation of the
      graphic.  Lay the vinyl over the visor to get an idea of where you will position it during installation.

3. - Remove the protective backing from the vinyl and hold it at the edges that will be trimmed so you will not
      contaminate the adhesive with the oils on your fingers.  Center the graphic and lightly lay it across your
      visor.  DO NOT STRETCH THE MATERIAL!  This vinyl has memory and will attempt to return to its original
      state over time and will cause cracking/peeling.  Let it naturally fall across the visor.

(http://images2d.snapfish.com/232323232%7Ffp53679%3Enu%3D3386%3E5%3B9%3E668%3EWSNRCG%3D323%3A47%3B7%3A4536nu0mrj)

4. - Apply the graphic to the center of the visor and work your way out to the edges one side at a time.  The
      vinyl has a pressure activated adhesive.  You may reposition the vinyl as you apply it making sure not
      pull or stretch the material.  Because of the curve most visors exhibit, the material will want to ripple
      in some areas.  TAKE YOUR TIME AND BE PATIENT!  Work with the material and reposition it until you get
      the most desirable fit.  Use a squeegee or credit card to smooth out the material as you apply it working
      from the center to the edges.  DO NOT ALLOW CREASES TO FORM!  Lift the material, reposition and
      smooth out all creases.  DO NOT TOUCH the adhesive where it will contact the visor or the visor surface
      itself.  The oils on your hands will inhibit a positive seal.  Don't worry, it will not be perfect at this stage!

(http://images2c.snapfish.com/232323232%7Ffp53659%3Enu%3D3386%3E5%3B9%3E668%3EWSNRCG%3D323%3A47%3B7%3A4547nu0mrj)

5. - Once you are satisfied with the graphics overall position you may begin applying heat to shrink fit the
      material as you smooth it with your card.  Use a hair dryer or heat gun set to low or medium heat holding
      it 3-4" from the graphic.  ***CAUTION*** overheating can cause separation of the laminate and distortion
      of the vinyl.  DO NOT LIFT THE VINYL AS HEAT IS APPLIED!  This will also cause distortion and improper
      fitment.

6. - If possible remove the visor from the helmet to prevent the helmet finish from being damaged during
      trimming.  Use your XACTO Knife or razor knife to begin trimming off the excess material.  The XACTO
      knife is preferred and allows surgical precision because of a finer tipped blade.  Start by inserting the tip of
      the blade into one of the perforations.  Use the edge of the visor as a guide for your knife and stay as close
      to it as possible.  You want the vinyl to be flush with the visor.  Excess material will lift and catch the wind
      causing ripples.  Try to stay in the same row or column of perforations as it gives a cleaner look.  Hold the
      trimmings taught with the free hand and allow the blade to do all the work.  Done properly, the blade will
      glide through the vinyl.  Again, do not pull or stretch the material.

(http://images2c.snapfish.com/232323232%7Ffp53645%3Enu%3D3386%3E5%3B9%3E668%3EWSNRCG%3D323%3A47%3B7%3A456%3Anu0mrj)
(http://images2c.snapfish.com/232323232%7Ffp5365%3B%3Enu%3D3386%3E5%3B9%3E668%3EWSNRCG%3D323%3A47%3B79%3A%3B%3A5nu0mrj)

7. - Once the excess has been trimmed check the opening/closing operation of your visor to make sure there is
      no interference.  Use the tip of your blade to pop any air bubbles that may have formed.  Apply heat and
      smooth firmly from center to the edges.

8. - RIDE SAFE!!!  Take some creative pictures.  I am eager to see these in action  8)

(http://images2d.snapfish.com/232323232%7Ffp5368%3A%3Enu%3D3386%3E5%3B9%3E668%3EWSNRCG%3D323%3A47%3B7%3B7783nu0mrj)

Good luck,

- Will

^^ thanks for the writeup!

I absolutely cannot wait to get this thing on.  haha

is there anyway to get the list on the first post?  that way its easier to verify that you have our money and order!

As Duc owners we probably already get a decent amount of head turns... with this its gonna be astronomical!   [laugh]

The wait is EXCRUCIATING..................................................

Hi..

newbie here and just paid for two yesterday plus $10 shipping....Hope you got it.

Cheer..

I want it yesterday :-(

sorry to keep bugging you... could you update the payment confirmed list?  [beer]

WOOOT WOOOOT!!! just got a shipping confirmation from paypal!!!

I cant wait!!! My face resembles that of the lego man  [cheeky]

Oh? Have they been shipped?

Some of them have, I just got a shipping notice, too.  [thumbsup]

Patience, young one. Arrive, your visor will.

(http://blogs.fayobserver.com/faytoz/files/2008/08/yoda.jpg)

ordered  [thumbsup]

Paypal sent!   [evil]

I'm not a huge rush. It'll be weeks before I can put it to use. But, I will be using it this spring/summer.

Wonder what base police will say.

Got it today Will. Thanks.

Now to find some time to put it on so i don't make the beast with two backs it up

(http://www.fototime.com/3221F2CFC59561E/standard.jpg)

Got mine today. Was a little tricky to install and it's not perfect, but probably because i rushed it a little. Looks good though and I can't wait to go for a ride!

Thanks!

Installed on a Shoei RF-1000 just fine

ahh i cant wait!! i wish it came today, but not a huge deal... Im partaking on a group ride this saturday so i hope it comes tomorrow in time!


Post up pix for those who already installed it!

Hope you enjoy it!


Let us know what you think after your ride....and as far as the install goes....patience is a virtue 8)

Can you see out of that thing? Visual from the inside please - put info on the first post. [thumbsup]

Very cool. I was going to help you with the graphics, but someone beet me to it.

(http://images2d.snapfish.com/232323232%7Ffp5367%3B%3Enu%3D323%3A%3E38%3A%3E3%3C4%3E232%3B38%3A4%3B5593ot1lsi)

Got mine today...

Well it came yesterday but I was out of the office so It was waiting for me on my desk this morning. UNFORTUNATELY, I'm packed to go out of town to hit the track this weekend... so I wont have a chance to install it until Monday.. But I'll post up Pics ASAP

Wife said mine just came in the mail.  I'll post some pics when I go home next month.

I'm looking forward to getting mine. I am curious to see if anyone gets pulled over by the  [leo] for the visor covering.

Well I just went for a short ride. Passed right by a cop going in the opposite direction and he didn't turn around. Either he didn't care or didn't notice. I'm in Texas BTW.

I must say though... it's a little distracting. It's harder to see details in the road and screws with your depth perception. I found it harder to judge how far away cars were and how fast they were stopping. Maybe it won't be as distracting if I ride with it more often, but this was the first time I felt concern for my safety since my first highway ride.

I definitely would not ride with it at night or in tunnels. Bring a spare clear visor with you if you're afraid you'll be caught after dark.

Anyone else share my same experience or concerns?

It did get quite a few looks though. The kids getting out of school loved it.

---

EDIT: Hrmm... maybe i felt a little more distracted by the visor than I should have been. I think I may be getting sick and riding my bike triggered light-headed-ness making it harder to concentrate while riding. My niece has strep throat, and it was only a matter of time until I caught it... just a coincidence that it happened the same time I was testing the visor skin. I still think the visor skin itself makes it harder to see when riding though. I'll try it again once I'm no longer sick... and let me know how you guys feel riding with it.

That's smart for certain. I'd guess that if it were me that I'd be distracted because I'd be too excited about it!!!!

Ride safe at all times!  [moto]

Yeah, i can imagine how it can be distracting while riding... but im sure you would eventually get use to it... and just think... once you start using a normal visor its like you'll have super vision!!  [laugh]

im seriously going crazy waiting for this thing!!  Luckily im going to watch a movie with a friend so hopefully it comes today in the mail.. Im all the way on the left coast so i have no idea how long it should take to get here.

Installed. Not a job for someone with OCD, its very hard to get perfect. Which mine is definitely not. Glad i installed it on my Gmax and not my Arai.

(http://www.fototime.com/AAD7379EFCDA46D/standard.jpg)

can you apply this like a vinyl sticker? with soapy water/alochol mix? would make the position 10x easier.

I don't think so. I'm sure someone who is used to doing decals etc. would probably do a better job.
The curvature of the visor really drove me crazy.

i went to a local sign shop to see how much it would cost to get a custom face shield graphic done... they told me with the material thats perforated and laminated, you dont want to use liquid during the application process.  They also recommended getting a tape to seal around the edges to ensure that nothing works its way under the portions that are perforated.


 :( no lego face shield for my group ride tomorrow... im so dissapointed... oh well.  I will just have to wait for the next event.

No it is not recommended......it is meant to be applied to a clean, DRY surface!  Your installation instructions will help.


Sorry for the delay ghosthound.....PP shipping ain't worth the paper its printed on!  I personally mailed duclvr's graphic at the Post Office March 2nd and it was there the 4th.  [roll]  The tape on the edge is not a bad idea.  The adhesive is aggressive enough to combat this if installed properly.  Taping would be insurance and could extend the life of the mod.

Please be safe!!!  Hope you feel better 8)

where are you mailing them from? mine hasnt arrived yet either.

Patience is key!.....it looks good.....i like how the revised design turned out 8) 

Thanks for posting pics [thumbsup]

nah, i understand.  Its still within the time window the shipping service should take.. i just cant wait to rock this thing!  [thumbsup]

Heman - you are in NY?

Mine hasn't got here either. Suppose our Letter carriers are slower.

If I see a mailman with my lego visor on it will be WAR!

I was in Siberia when I dropped off the shipment.  I had my doubts, but the Siberian postal worker assured me he had the fastest reindeer team in the land! 

I shipped from South Carolina, and Rameses in NC still has not received his either.  I contacted the Post Office that I shipped from, and they assured me that all the packages were received/processed without an issue.  Long story short, I will not use PP shipping again.  I apologize for the inconvenience guys!


Haha.....I had to giggle at the thought of that.

 [laugh]

(http://www.fototime.com/07534024EDCDC17/standard.jpg)

 [laugh] [laugh] [laugh] [laugh]

Haven't gotten mine, either.  Will be on the look out for the said mailman!

No need to apologize man!! We are just impatient! haha.  The shipping info said 4-9 days so your still golden.  I just really hope it comes sooner rather than later!




... i still need to get a new clear shield. 

Why are you holding that pitchfork then?  ;D

cuz im hungry  :-\ [bacon]

haha i just hate shipping that doesnt tell you where the package is at.  No fault of yours.  Im just dying to get my lego on.   [laugh]

Soooo, my dad is a mailman, if I catch him wearing my visor what do I do? Kick his Butt? That might cause some family problems. . .

The Doc

Hey when it comes time to throwdown, you gotta throwdown.  [evil]

It's almost time for torch and pitchfork... 

Family will always be family, even if your kick your pops ass.  [thumbsup] [laugh]

Seriously though, it seems like mailmen are extra slow these days....ive had 4 packages take over 12 days to come. All from the west coast.... i think its a conspiracy.

Anxiously awaiting mine....

  Though if people in the States are still waiting, then I'll most likely be waiting awhile to get mine in Toronto, Canada.

   :-\

Mine arrived in beautiful and sunny Chapel Hill, NC today.   [thumbsup]


It only took the USPS 8 days to mail something 300 miles down the road.   [laugh]

still no dice :-\

if you get them, post up your location so we can get an idea of where they are starting to show up... also mention apprx when they were shipped. 

Mine was shipped to FL.

Mine was received in Texas a week ago.

Then I'm screwed  :o I'm in Florida.

I ordered some LEDs 3 weeks ago. took 12 days to arive from washington state. I returned the item via first class mail. took 2 days to get to them.

someones playing with my stuff. not cool.

Just a small detail in case all of you weren't aware of it...

The date on the email with "tracking number" is not the same as the date that your package was shipped out.

Mine went out 3 days after I got the email.

recieved mine in Tx yesterday  [thumbsup]

I got mine. mail man was trying to walk away as i got to the door.  [thumbsup] these things are freaking sweet!

now i just need to find a visor.  ;D


Thanks BHK!

Glad they are finally rolling in.  I am looking forward to seeing them in use  8)

I should probably go buy a new clear visor to stick this sucker to...

not to mention checking out new gear is a great way to pass time.  [coffee]

I finally got mine!  The long wait is well worth it.  I am in Seattle, WA, BTW.

Well, now that I've put the sticker on, I would have to say that it was a pain in the neck to apply it on a Arai faceshield.  The shield vents caused a lot of problem that I couldn't help but had some creases around the outer edges of the vents.  It's not very noticable from a distance though. 

CAN'T WAIT TO GO OUT AND RIDE!

Yes, the Arai is a little different.  It helped when I popped those vents out and applied the vinyl to the bare shield.  I cut out the slots, and popped the vents back in.  Makes it much easier.

DOH!  Only if I knew the vents are removable....

AHH I CANT WAIT!!

I still think the mailman is wearing mine.

not here yet  :(

Got mine in the mail today.   [thumbsup]

[I'm in MN, in case anybody's curious]

I think the maillady took mine  :( She did drop off my new Shift-Tech hugger  [thumbsup]
Dammit!!! I wanna be a LEGO!!!  [bang]

i think im about to send out a search party... the mail came in way earlier than usual *suspicious*

haha another grueling day to go through... oh well, at least some car parts are coming in tomorrow.

Woah...people are mentioning shipping e-mails.

 I didn't get any e-mails or notices saying it was shipped.  ???

Your Canadian, therefore not privileged to said notices.












International shipments were not sent out through PayPal do to customs forms.  I personally mailed them at the Post Office.  It will arrive this week though  [thumbsup]

Don't worry.. the shipping "updates" are useless from USPS.  It actually emails you when the payment for postage was made... not when it was shipped or where it is currently at. 

Im crossing my fingers for tomorrow!   [beer]

Don't worry BastrdHK, as impatient as i sound or seem im not one bit upset.  I just cant wait to go riding around with a huge permanent yellow smile on my face....shield...  [laugh]

have you shipped mine yet? just wondering.

Mike

USPS' shipping notification is just crap they try to make look like UPS' and FedEx's tracking. The USPS system was only designed to show that a package reaches a destination, and often times you won't see any tracking information until AFTER you get the package. It's helpful to people who ship things, but not those awaiting shipments.

thats why its called delivery confirmation not tracking.  :P

good point...

Where are the pix guys??

Yeah?  [popcorn]

Mike,

I shipped yours Mon. March 2nd.  You should get it today or tom. at the latest.

USPS is pretty much worthless in my opinion anyways...


I got mine... nicely packaged and ready to install... still packaged up though. Was at the track all weekend (would have been funny to wear it there) and I haven't gotten my clear visor out of its hiding spot yet. will post pics asap

Just got it today at work.  [beer]

 Gonna spend all night workin on it.

MY GOD I JUST FOUND THIS THREAD.

ARE THERE ANY LEFT?! i WANT ONE I WANT ONE I WANT ONE I WANT ONE I WANT ONE I WANT ONE I WANT ONE.

oh i WANTITWANTITWANTITWANTITWANTIT

WANT.

i'm sending paypal anyhow. just in case there are.

Haha....sure you don't want two?  I have 5 left so your good.

PayPal williford112000 at yahoo.com

- Will

(http://i3.photobucket.com/albums/y84/billruiz/Ducati/P3121433.jpg)

I got it on there pretty good with practically no bubbles, BUT it is weird looking thru it. It might just be me, but it seemed like you are almost looking underwater. I'm hoping it gets better in bright sunlight. I'm gonna wear it on my way to the Duc dealer tomorrow. They've got some kind of demo promotion going on. I will take an extra shield to wear during the demos....don't wanna drop anything as a LEGO.

Haha!

The Arai vents look like eyebrows.

(http://farm4.static.flickr.com/3435/3349687239_b1f4eddeab_b.jpg)

thanks man!

ARRRGGGHHHH!!! I've been checking the mail religiously every day, and today my wife leaves with the mail key w/out letting me check the mail first and won't be back for hours!!! I'm dying here. I'm gonna have to call up my dad and have him come bust the box open (he's a mailman).

The Doc

It's Joel in a helmet.  What does this have to do with the Lego visor?

(http://photos-h.ak.fbcdn.net/photos-ak-snc1/v2644/201/120/535131733/n535131733_1512479_2055749.jpg)

(http://photos-a.ak.fbcdn.net/photos-ak-snc1/v2644/201/120/535131733/n535131733_1512480_228945.jpg)

(http://photos-b.ak.fbcdn.net/photos-ak-snc1/v2644/201/120/535131733/n535131733_1512481_3798294.jpg)

 [moto] [moto] [moto]

^^ Ha, that's tight!
How's the visibility?

It took some getting used to.  BastrdHK was right.  Although the overall view was ok, the depth perception was way off.  I found myself braking a bit late and had to brake harder.  I wouldn't ride at night with it, that's for sure.  :)

ahhh!! another disappointing day!!

 

Got mine in CA

I have to admit, this looks MUCH better than the original idea. seriously BastardHK, i cant thank you enough to have picked up this project Super glad of how it came out!

(http://img9.imageshack.us/img9/5958/sdc10397.jpg)

(http://img27.imageshack.us/img27/9306/sdc10396.jpg)

didnt have a sharp enough x-acto since my blade is fairly used, no worries though, this is just a scrap visor thats gonna get trashed soon so i have the good one placed on my new visor comming with my new helmet.

notice the carbon fiber nut guard on the left!

I'm loving all the pictures! Looks like you guys had more patience than I did.  [moto]

Got mine!

Now, have to put it on

There are even more awesome than I was hoping, I'm a bit bummed I don't have an Arai though because the eyebrows are hilarious. Can't wait to get mine. :)

You look so earnest when cornering:

[laugh]

 X2

 I fubard mine up a little.

 That's why i bought 2!

I got mine yesterday in San Jose, CA.

 My husband thinks I should use soapy water to put it on. I told him I have to see out of it. He said it would dry clear. I told him he was full of crap. It turned into a stupid argument. Someone please say that soapy water would be a stupid idea so that I can win.

BastrdHK, If anyone out there has an interest in getting a Lego face will you be getting more or are you done?

Hey Will,

I just sent you the paypal.

Looking forward.

Russ

 :'( I hope sacramento is just a little bit behind...


as for the soapy water... i stopped by a sign shop to see what they would charge to get something made for me and i also asked them for installation tips.  They said that because it is laminated, and perforated, they wouldnt recomend using a water application...

My favorite so far  8)  I am very impressed with the installs.  It can be tricky on the visors.  He Man, nice job cutting around visor lock....I know that wasn't easy.  Glad you guys like it! 

If you are having trouble with your vision just eat more  [bacon] then smear your fingers all over the visor.....works just like Rain X   ;D  I am anxious to hear what the reactions are on the street!

ghosthound is 100% correct......DO NOT USE SOAPY WATER.......the visor must be clean and dry to get the best adhesion.  Water is only used for certain types of adhesive, specifically large graphics on surfaces that have multiple contours where positioning is difficult.  Vehicle wraps are a good example of this type of application.  Most people end up using too much soap (you only need about one drop of liquid soap per liter) which leaves a film as the water evaporates and prevents proper adhesion.

You win the battle, and can choose to blow him out of the water with this knowledge or be merciful, and tell him he is not entirely wrong.  8)

Yes, I will print more on request, but they will not be the same price for non DMF members.  $35 for non members....save $10 if you join the DMF  ;)

Trolls need not apply! i know there were a quite a few people who signed up JUST to buy this thing.  [laugh]

i just went for a walk with it. Without my contacts in, i cant, NOT focus on the dots and its really hard to see. but with contacts on, its fine. luckly i dont ride without them so im good.

We need a DMF Lego Rally! Can you imagine how awesome a group shot would be!! [laugh]



I here by nominate this for the 2009 DMF Thread of the Year Award:

(http://www.umtsd.org/TeacherPages/LEAPweb/images/trophy.jpg)

Maybe we need a minimum post requirement too huh!?!


Awesome!

I got a weird tip on installation. Being a lazy ass I sat in my recliner putting the LEGO mask on. Once I got it where I wanted with the shield IN the helmet, I got it started in the middle and worked my way out. What really helped was holding the shield over my face while in full recline mode. If you keep the mask sorta curled away from the shield it was easier for the decal to not get accidentally stuck.

In the attached pic I'm using a cloth to simulate the decal. My kids think I'm nuts. All in all it took me about an hour to get it on. Patience is the key and yeah my arms got tired.

(http://i3.photobucket.com/albums/y84/billruiz/LEGO.jpg)

Oh, that makes a lot of sense to do it that way.

Also, awesome dogs.

They are supervising, can't you tell?

The Doc

FYI....be very carefull riding with this on.  I just got back from a test ride.... wowzer.... my head is spinning. My eyes had a hard time switching from looking at the dots, to looking through the dots.

How is it on the inside?  I was thinking that would make cleaning a lot easier.  I'm still waiting on mine to make my decision.

THANK YOU THANK YOU THANK YOU!!!

off to the store to get a new clear shield to stick it to!  [thumbsup]

+1 i think it might of been wiser to go with the big dots. I threw my contacts in and went for a ride, it was easier to not focus on them with my contacts on but the second you start looking at the dots, you wont see anything but dots. I think this will be a show off visor, just to look pretty riding around town. I wouldnt take this on a weekend ride or to the track.

woot woot ...got it today ..............Canada !!!...

will install tomorrow supposed to be 13 deg this weekend ...maybe a trial ride for Mr Lego Head

I am so glad you finally got it.  The long wait is finally over.   [thumbsup]

Its harder to see through it when the sun is shinning at you.  I noticed that in the shaded areas, vision was barely disturbed. I did notice that people would stare and sometimes even point  [laugh]

I will post pix with the bike tomorrow!

(http://img12.imageshack.us/img12/7796/imgp4291u.jpg)

(http://img12.imageshack.us/img12/3982/imgp4297.jpg)

Overall, it was money well spent.   [thumbsup]

As i was wearing it today... i started thinking... It seems like a lot of the visual distortion comes from the laminate layer.  I understand its importance in protecting the finish on the printed vinyl but i believe if it was just the perforated vinyl, we would be able to see through it a lot better.

Visibility wasn't as good as I hoped..  but still can't keep chuckling from how silly I look :)  This thing is great.

(http://img22.imageshack.us/img22/6038/legoman.jpg)

(http://www.fototime.com/04F8F3DAA2402D7/standard.jpg) [thumbsup]

brooklyn is a depressing place. only the little children laugh. the adults have already lost their emotions. its insane! but i dont care im laughing away in helmet with a fog free visor! MUAHAHAHA!!!

I got mine on Friday and wore it on the 18 mile ride to work, traffic was a little slow, however I got a lot of looks, a ton of thumbs up and lots of people creaming things like "that's so awesome!" and "That Rocks Man!" It was way too much fun.

I wear all black gear on a dark monster but add a Repsol version of the Axio hardpack, which has a hard plastic shell, I think it goes well with the LEGO face. Sadly I can only wear that visor w/face when it is bright outside, and I live in the pac NW.

here's the bag I wear
(http://stores.sportbiketrackgear.com/catalog/32-2905.jpg)

I just got mine in today!   [thumbsup] [thumbsup] [thumbsup]

New helmet this weekend + spare visor and hopefully I will have it ready for work on Monday morning.

Thank you for this!   [bow_down]

that is make the beast with two backsin' hilarious!

I just discovered this post.  Looking at the first few pix of the helmet I wasn't too impressed.  Then I saw the pix of you (or someone) actually wearing it.  While laughing I said to myself, "I must have one of these!"

Beautiful.

I am LegoMan

(http://i22.photobucket.com/albums/b343/uterep/Ducati/100_1244.jpg)


very cool thanks


March Break so many kids given me the thumbs up

Not enough time to work on your grammar apparently.   ;D ;D ;D ;D

Any left?

WANT!

It'd be great with my Isle of Man jacket...

yer out'a da will



 [laugh]

I wore the Lego visor today on my way to school. It freaked me out most of the time, so I rode with it up, but lowered while at stoplights. Kids and moms think it's cool. A harley guy in his bar and shield festooned cage called me a squid. I called him a tool...no response after that. I can't wear it like some of you guys. I feel like I'm riding with a blindfold....but when a hot soccer mom likes it, life can be good.

"What say we fold down those rear seats for a little "stow-n-go" action?"

anyone tried putting this on the inside of their visor?  i want it to cover only my face so it looks more like the original 80's lego man  - if i cut it and placed it inside out - would it make a difference?

maybe i'll be the guinea pig and let you know what happens....

The back of the graphic is black, and is the only side with adhesive.  If you flipped it all people would see is black, and you would be challenged to a staring contest with a giant lego man every time you put your lid on. 

The graphic will trim down to any size you want.  You do not have to follow the outline of your visor.  If you want to trim the graphic down to cover just your face go for it, but make sure to cover your entire field of vision.  Any open areas on sides/top/bottom will be very distracting. 

Make a template with a piece of paper, place it on your helmet and trim or trace the outline you want.  Apply the template to the graphic and cut it out.

Good luck,

- Will

I want one!

ha - i just noticed that it is black on the otehr side - oops!

Got mine today! I'm so excited to put this on!

(http://i160.photobucket.com/albums/t180/bobspapa/022-2-1-1-1.jpg?t=1237426755)

Just found this myself (im lazy damnit)

If there are any left, I want one...otherwise, is there any plans t do another run? I know several friends locally that will want one once they see me with one...

got mine the other day...put it on a few nights ago.  i did a pretty good job of installing i think...but ended up with a couple wrinkles still.  hopefully though they will just stay small.  but otherwise it went fairly smooth.

the one thing i noticed was the clear vinyl seemed not as clear as i was hoping when wearing it...vision is slightly hazy.  getting the hang of seeing through the perforations is easy enough, but the small amount of haziness does make it a bit more challenging.  definitely not something you want to be caught riding with during the nighttime...

Put mine on today.  If the material had been a bit taller, it would have wrapped beautifully on my HJC CL-SP, with almost no distortion.  But, because it was relatively short top to bottom, I had to either leave the rear sides (where the visor mounts) uncovered, or work at an angle that completely covered the sides, but distorted the whole strip of smiley material with respect to the surface of the visor.  I chose the latter, though it meant lots more work going after wrinkles and bubbles, and a 45 minute install instead of a 2 minute install.  Still, I'm happy with the result.

(http://homepage.mac.com/trenner/images/smiley1.jpg)

I agree with the laminate creating a haze.  It is optically clear before it is applied to the vinyl, but the heat used to apply it, as well as heating it when we install it on our visors, causes distortion.  The laminate was intended to preserve the graphic and ease cleaning because it would not allow debris to get trapped in the perforations.  The laminated graphic will last forever, but if you don't feel comfortable riding with it its not worth it.  I am printing the second batch Monday, and I'm going to forgo the lamination process.  I want to ride with it for awhile to see how it performs.

 

trenner,

Do you think an extra inch in height would've given you enough room?

Let me know when that laminated batch is ready... I have no issues with the perforations but its the lamination that makes it hard to see. 

I totally understand the need for the lamination if the application was for the long haul. 

Same here.

How hard is it to take off?  I may hold off putting the laminated one on and just get one of the non-laminated ones.

would it be possible to have the laminate come separately? 

trenner,

Do you think an extra inch in height would've given you enough room?


for me an extra inch would have been perfect

If the vinyl had been 6.5" overall height, with that extra material added ONLY to the top (above the eyes) to make it so, it would have been perfect for my application.

Okay, I think I have come up with a solution.  The laminate does not come off the graphic.  The two materials are heated(melted almost) together.  We could do a clear vinyl separately, like tear offs racers use, but there would still be distortion because the clear layer would be held off the visor by the perforations, creating a space and haziness.  Personally, I haven't tried it, but I doubt its worth the hassle. 

Solution:  I have found clear protective gel that can be sprayed over the graphic during production.  This will protect the ink, but the perforations remain clear.  I also added an inch to the top to aid installation. 

Thanks for your input guys!  Printing the new batch today.

- Will

Genius!

Sign me up for one!

entertaining previous customer discounts for those that want to try out your verson 2.0?  don't get me wrong, it's very high quality, and even my poor sticker application skills were good enough to apply it; i think it would last for a long time.  but that said, i felt unsafe enough that i went out the very next day and bought more visors, as i didn't think this would be smart to be a "daily driver".

definitely not a daily driver. 

IMO you're just asking for Jonny Law to pull you over and harass you.

There are a lot of things we do that can provoke that kind of response from "johnny law"...

This just happens to be one of the cooler ones  [laugh]

somehow, i don't think so.

everyone i've show these pics to breaks out laughing.  it is hard to feel aggressive with that look on your helmet.

part of the problem riding with a full-faced helmet is people can't see your face and know if you're smiling or frowning or if you're an alien or whathaveyou.  wearing this decal makes people think you're smiling.

it certainly cracks me up every time i look at them.

sweet.  just sent payment for 1 from new batch.

thanks!

Yeah, I'm incredulous about that.  Rather, I think it's one reason for John E. Law to give a pass to ALL THE OTHER STUPID STUFF I do that makes him want to pull me over and harass me.

Actually, I look like an old dude (that is, the old dude that I am) even when I'm fully geared up.  I'm convinced this is why I've NOT been pulled over on a number of occasions when I should have.

The Lego/Smiley Visor will only add to this great "package" I am.   [laugh] [moto]

More pics people!

I finally got around to putting mine on today.  I have the same helmet as Trenner (HJC CL-SP), and I had the same issue with the decal not being quite tall enough.  I chose the other option though, and cut off the back ends.

Here's as close to the top of my visor as I could get it:
(http://img.photobucket.com/albums/v341/BiggieTheSpaceman/Ducati/IMG_3618.jpg)

(http://img.photobucket.com/albums/v341/BiggieTheSpaceman/Ducati/IMG_3619.jpg)

So here's what I ended up doing:
(http://img.photobucket.com/albums/v341/BiggieTheSpaceman/Ducati/IMG_3623.jpg)

(http://img.photobucket.com/albums/v341/BiggieTheSpaceman/Ducati/IMG_3621.jpg)

Overall I think it looks pretty cool!  I'm looking forward to trying it out on my next ride.  [thumbsup]

(http://img.photobucket.com/albums/v341/BiggieTheSpaceman/Ducati/IMG_3622.jpg)

i, apparently, suck at removing all 'bubbles' near the edges as it goes around. still looks pretty good, and from a car lane away i don't think anybody will be able to tell.

i'm just really impressed with everybody else's results.

I'm pretty happy with how I got mine to turn out.  It took me at least an hour of screwing around though!

I got mine in the mail the other day, it's freaking hilarious. Can't wait to put it on my visor. I'm wondering whether I put it on my new helmet or my old one. :)

I bought a new visor just for mine; waiting for both to arrive!

Mine just arrived today,
I'll install later, I have to grab the heat gun from work to complete it, looks great.
I'll post once I'm done.

Thanks Russ

I finally got my new helmet and spare visor just for this... now I need to find time to actually put this on...  I know there's some time around here somewhere.  Oh crap... I just wasted it posting.  :(

Good job with the install Paegelow!  The new batch has been sent out six people so far.  It is an inch taller to correct the issue trenner and Paegelow experienced.  It is not laminated to correct the haziness that many experienced, but is protected instead by a UV resistant gel coat that does not interfere with the perforations.  I have ridden with it for the past week, and I am very happy with the new design. 

As a bonus, not having the laminate makes the install much easier.  You have about 5,000 perforations working with you to keep the wrinkles out.

I look forward to hearing from the guys that just received the new batch.

I haven't installed the original yet.  How do I get the new style and does anyone want the old one?

I have incorporated the visor graphics into my website with more designs coming soon.  The site will focus on photographs of early motor sport.  The site is still in its infancy, and I am adding content daily.  I have about 500 images to process and add to the site.  It is a daunting task at times with late nights.....(as I post at 2:45am).  I am learning a lot about early racing history, the machines, and the men that pioneered some of the technology we ride on today.  Some of these guys make modern day racers look like pansies!!!  100mph on a board track with no brakes or throttle control....(they just ran the carbs wide open and held on for dear life)  :o  Let me know if there is something specific you would like to see. 

The site is not compatible with Internet Explorer right now, as there is a bug in the code I haven't worked out yet.  DMF members receive 20% off and all members that joined before April 1st get the Lego graphic for $25 shipped.  During the order process include your DMF screen name at payment, and I will refund the difference the next day. 

It has been a lot of fun working with everyone. 

Thank you for all your support guys!

- Will Fulford
   www.vintageinkonline.com (http://www.vintageinkonline.com)
   843-870-5101

(http://www.vintageinkonline.com/components/com_virtuemart/shop_image/product/_How_fast_office_49d0332ec2989.jpg)

sweet! ill order when i get home!

Very awesome, good work! I plan on ordering one right now. I'm going to get laughs riding around base, but thats what this is all about.  :)

Thanks!  I finally went out for a ride with it, and got a lot of goofy looks ;D   It was kind of hard to see though.  Like areas where I know there's usually gravel and crap in the road, but i couldn't really see it, that was kind of terrifying!  I might be interested in the non-laminated version.

Okay, can someone remind us how to get one?  I'd rather not read through all 17 pages of threads to find out how.

The newer, non-laminated design will definitely correct that issue.

 

VintageInkOnline.com (http://VintageInkOnline.com) ...... be sure to include your DMF screen name during payment.  You were a member before Apr. 1st qualifying for the special DMF price($25).  I will refund the difference the following day.

Got mine in the mail, but I'm waiting on a new visor to put it on. Curious if mine is the new or old though....

What was the date you placed the order?  Or lift one of the edges from the backing paper and look at the perforations.  You should be able to see if it is laminated(old) or not(new).

I installed mine few weeks ago so I'm assuming I have one from the original run. It looks cool but is in no way safe to ride in. I took a morning ride down town for some coffee though down town Annapolis one Sunday morning. Everytime I was was headed into the low morning sun I couldn't see a damn thing.  Small objects in the road are also very hard to see. 

I peeled it off for the ride home :'(

Does the newer material have this problem?

Mike

I'm sorry you experienced that Mike.  The heat process when applying the laminate to the graphic causes the once optically clear material to distort slightly on some of the vinyl. 

The new design is not laminated, therefore you have an unobstructed view through the 6,000+ perforations.  The material is still protected from UV rays and scratches with a clear gel coating sprayed on during printing.  This coating does not interfere with visibility. 

You will still be affected by the sun because you are wearing a clear visor, but you could try a SLIGHTLY tinted shield or sunglasses.

no Worries.

Got mine, installed and tried a ride. It felt like I was riding without my contacts. Scared the hell outta me. Had to swap back to a normal visor. It's a shame because I love the look. But, I can't even read the gauges.

i took the bike out with the helmet at night time....MUCH easier, everythings already dark so you dont even see the black dots... didnt have any issues. i also have a non laminated one.

How is the non laminated one in the day time?

hard to say, everyones eyes are different, i tried riding with glasses on ( i ave -2.5 in each eye) and it was impossible, with contacts in, it was fine. You just have to mentally take a note and remember to not try and focus on the dots, cause once you do, youll find it impossible to not focus on them.

I think for the sake of art, this thing is great. But for every day usability, it would need to larger preforations, but it takes away from the hilarity of it. which is why i only wear the vinyl commuting around town. serious jaunts = clear visor.

Okay folks, here thay are, photos of me wearing my Lego face.

(http://c4.ac-images.myspacecdn.com/images02/82/l_41449477c4bb429da0daea4b631e3f3b.jpg)
(http://c4.ac-images.myspacecdn.com/images02/84/l_9ee4edab2c5a4cd8b11982faa20e2d57.jpg)
(http://c1.ac-images.myspacecdn.com/images02/71/l_a77aa64c2c2b4d07b48c248e3e4583c4.jpg)

The BackPack I wear is a repsol replica hardpack that gets a lot of attention on the freeway (the good kind), and the giant plastic shell works awesome with the lego visor. The other day I got a whole bus full of kids waving at me on the freeway. It was great!

The Doc

Finally got my new helmet and attached the lego action:

(http://kealani.smugmug.com/photos/520121974_W3Y4s-L.jpg)

[laugh]

The new version is definitely an improvement. The bright sunlight is its only weakness. I was dubbed "Legoman" at the elementary school I was doing field work in. The teacher I worked with gave serious thought to returning to motorcycling, but his wife (who taught in the class next door) felt the subject needed further discussion.  >:(

I'm still getting used to the dots and I have found they can be a bit hynotizing. A couple of times I seem to almost forget how close I am to things and catch myself using the brakes a bit abruptly...just need to practice I guess.

you know every time i see  the new pics ...i smile ........................this is is the goffyist  crazy thing i have seen



so glad i got one



keep posting your pics

thought I'd post up a pic of the visor being put to good use.. this was in monterey for the laguna seca race weekend..
(http://i27.tinypic.com/2e34yrk.jpg)

 Very nice......nice ride......Laguna Seca = jealous [moto]

I bet those chopped Termi's get your attention!

Are those Termis or tall boy cans?! Those things are chopped! Looks good!  [thumbsup]

Sorry for the threadjack!

This just struck me as funny (and relevant):

(http://farm4.static.flickr.com/3495/3798317912_0033e61a1a_o.jpg)

Got mine for Christmas (along with another clear shield to put it on).
(http://farm3.static.flickr.com/2487/4242863665_7dc38b2c47_b.jpg)
My son really digs it!
(http://farm3.static.flickr.com/2665/4243635606_369c56d4b7_b.jpg)

I think I found my new LEGO man!  [thumbsup]  Can you send me some more pics of the little guy with the helmet?  I would like to add them to the site.

Will@vintageinkonline.com

- Will

These still available??








                                          Mmick

Mmick,
If they are not, I still have mine and never got around to using it.

I need another one.

Ok, how much do you want for it?






                                                  Mmick

PM Sent

Thanks, PM reply'd







                                  Mmick

http://myworld.ebay.com/vintageinkonline (http://myworld.ebay.com/vintageinkonline)

He's still selling them on ebay  [thumbsup]

Thanks for that.  [thumbsup]




                                          Mmick

Well finally.............

got some shots when I finished doing a fund raiser for kids for cancer today..... pity that none of them are on the move


(http://farm7.staticflickr.com/6100/6367036313_ee8b1e64f9_z.jpg)


(http://farm7.staticflickr.com/6101/6367034681_94a827d611_z.jpg)


Got a lot of looks and pointing at me...... great  [thumbsup]

And thanks again Mojo




                                         Mmick

LOL.  Great shots Mmick.

No thanks required.  Just paying it forward mate.  Enjoy.

I bet you were a hit...thanks for sharing the pics and good deeds Mmick  [Dolph]