Ducati Monster Forum

Moto Board => General Monster Forum => Topic started by: flynbulldog on February 19, 2009, 08:43:07 AM

Title: need S4RS help
Post by: flynbulldog on February 19, 2009, 08:43:07 AM
Could someone please measure the stripes (width) on the tank and rear cowl on thier S4RS for me.   :)
(I'm doing a paint job)

Thanks very much  [thumbsup] [thumbsup]

Title: Re: need S4RS help
Post by: DarrinG on February 19, 2009, 12:22:52 PM
I just measured my stripes.  There are three actually.   An 1/8" white stripe, then 1/8" space, then 3 15/16" (huh?  weird..maybe it's 4"?) white stripe, 1/8" space then 1/8" white stripe. 

Hope this helps. 
Title: Re: need S4RS help
Post by: DucRS on February 19, 2009, 01:19:14 PM
Quote from: DarrinG on February 19, 2009, 12:22:52 PM
I just measured my stripes.  There are three actually.   An 1/8" white stripe, then 1/8" space, then 3 15/16" (huh?  weird..maybe it's 4"?) white stripe, 1/8" space then 1/8" white stripe. 

Hope this helps. 

That's it. [thumbsup]
Title: Re: need S4RS help
Post by: stopintime on February 19, 2009, 01:40:46 PM
The stripes sold by Ducati1 are 6.7cm / ~2 2/3 inches (the fat stripe). I think they mention this for the cowl as well as the fender. I have no idea if this helps :-X

http://cgi.ebay.co.uk/Ducati-Corse-Stripe-kit-748-916-96-749-999-1098-Monster_W0QQitemZ130288100295QQihZ003QQcategoryZ10448QQcmdZViewItemQQ_trksidZp1742.m153.l1262 (http://cgi.ebay.co.uk/Ducati-Corse-Stripe-kit-748-916-96-749-999-1098-Monster_W0QQitemZ130288100295QQihZ003QQcategoryZ10448QQcmdZViewItemQQ_trksidZp1742.m153.l1262)

BTW: the stripes on my S2R are different widths all over. I'm quite sure they differ by at least 1/3". Maybe not the case for S4R?
Title: Re: need S4RS help
Post by: flynbulldog on February 20, 2009, 12:01:33 PM
Sounds like 4-1/4" over all
Thanks!

I didn't wait for an answer and I did mine a little different but its close and I like it.
Mike