Text only | Text with Images

Ducati Monster Forum

Moto Board => Accessories & Mods => Topic started by: psycledelic on March 01, 2009, 07:10:33 AM

Title: Oil Cooler - Motard1100 to S2R800 fitment
Post by: psycledelic on March 01, 2009, 07:10:33 AM
Anybody know if the oil cooler on the 1100 motor is the same size as the one on the S2R's 800 motor.
Title: Re: Oil Cooler - Motard1100 to S2R800 fitment
Post by: teddy037.2 on March 01, 2009, 09:20:14 AM
they should be the same...
Title: Re: Oil Cooler - Motard1100 to S2R800 fitment
Post by: psycledelic on March 01, 2009, 03:46:35 PM
That's what I was thinking.  Thx.
Title: Re: Oil Cooler - Motard1100 to S2R800 fitment
Post by: Rameses on March 02, 2009, 12:53:29 PM



They definitely aren't exactly the same b/c they have different part numbers.

But what the differences are, I'm not sure.
Title: Re: Oil Cooler - Motard1100 to S2R800 fitment
Post by: Mash on March 02, 2009, 03:46:11 PM
If it's of any consequence...  I replaced the oil cooler lines on my '06 s2r1000 with a set of hypermotard lines I got from eBay.  They fit perfectly... so, at least the fittings are the same.
Title: Re: Oil Cooler - Motard1100 to S2R800 fitment
Post by: Duck-Stew on March 02, 2009, 04:16:57 PM
Could be a part number supercession.....

The cooler and lines will work, but an 800 motor has a different valve access cover to mount to than a Motard1100 does.  Other than that, should work just fine.
Title: Re: Oil Cooler - Motard1100 to S2R800 fitment
Post by: psycledelic on March 03, 2009, 11:30:35 PM
Cool, I appreciate all of the info.
Text only | Text with Images