Ducati Monster Forum

Moto Board => Tech => Topic started by: mattb on March 08, 2009, 03:17:58 PM

Title: Tach disassembly howto with pics?
Post by: mattb on March 08, 2009, 03:17:58 PM
I have a 2002 S4 with a popped off tach needle -- I know there was a thread somewhere with some nice pics of pulling the cluster apart, but I can't find it for the life of me...  Anyone have a link for it they can post up?

thx

m
Title: Re: Tach disassembly howto with pics?
Post by: ute on March 08, 2009, 05:35:40 PM
here you go

http://ducatimonsterforum.org/index.php?topic=10142.0 (http://ducatimonsterforum.org/index.php?topic=10142.0)
Title: Re: Tach disassembly howto with pics?
Post by: mattb on March 08, 2009, 06:29:42 PM
Quote from: ute on March 08, 2009, 05:35:40 PM
here you go

http://ducatimonsterforum.org/index.php?topic=10142.0 (http://ducatimonsterforum.org/index.php?topic=10142.0)

Sweet, thanks mate!

m
Title: Re: Tach disassembly howto with pics?
Post by: gage on March 08, 2009, 06:35:16 PM
Quote from: mattb on March 08, 2009, 03:17:58 PM
I have a 2002 S4 with a popped off tach needle -- I know there was a thread somewhere with some nice pics of pulling the cluster apart, but I can't find it for the life of me...  Anyone have a link for it they can post up?

thx

m

Matt,

Yours will be a little different than those pictured. The back of the gauges will have 3 screws and you will only need to remove the one in the middle and then the torx in the front once that cover is removed. At that point you should be able to pull the two halves apart. The gasket will want to stay on one side but I forget which side. The other two screws in the back are what is going to hold the gauges inside the housing.