|
Title: Question about pipe years and fit... Post by: MonsterLove on March 20, 2009, 08:05:54 AM I'm looking for some stock pipes that fit my 2000 Monster dark 750. My question is what years have pipes that will fit? Will pre-2000 work, or anything after 2000? I know there were some changes made to the monster in 2000 so I wasn't sure what would fit and what wouldn't. I don't want to buy some pipes only to find they don't fit. I was having trouble finding info on it online, and I wasn't able to turn up anything doing a search on here either, so if this is a common question, I do apologize! I'm not going to be doing much custom work on my bike, I'm just trying to get it to look better, it's pretty banged up after being a commuter bike for almost 10 years. :)
Also, if someone has some stock pipes that would fit my bike for cheap, well. I'm interested!! Celeste Title: Re: Question about pipe years and fit... Post by: erkishhorde on March 20, 2009, 08:13:48 AM I've got some lightly scratched CF Termis that I took off my '95 m900 the last time I got bumped. The right side has scrapes at the front base on the end clip only and both pipes have light scrapes on the inside from hitting the swing arm bolt. Other than that there are no scratches on the CF.
I think all the low pipe models are interchangeable but I'm not positive. Title: Re: Question about pipe years and fit... Post by: MonsterLove on March 20, 2009, 08:18:24 AM Thanks for the offer-if I find out for sure those would fit I'd be interested so shoot me an email at Grayhorse5@hotmail.com with the pertinent info and a couple of pics. Thanks!
Celeste Title: Re: Question about pipe years and fit... Post by: erkishhorde on March 20, 2009, 08:25:09 AM Thanks for the offer-if I find out for sure those would fit I'd be interested so shoot me an email at Grayhorse5@hotmail.com with the pertinent info and a couple of pics. Thanks! Celeste I'll grab my dad's camera this weekend and snap some pics of them. [thumbsup] Title: Re: Question about pipe years and fit... Post by: ducrider45 on March 20, 2009, 08:50:07 AM The only cange that I know of it the mounting bracket. You can always drill a new hole in it and it will fit. I was able to fit 99 m900 cans on a 2002 620ie with only drilling new holes in the bracket that is on the cans. The bracket just bolts on. It was a tight fit into the pipe. I had to work it in. Any of the like-styled cans should work for you. You may have to modify the mounts with a new hole though.
Title: Re: Question about pipe years and fit... Post by: MonsterLove on March 20, 2009, 08:05:01 PM Thanks, that is very helpful. :D
Celeste |