So I got up at the asscrack of dawn today to make the trip up to see Eric (Ducvet) at his shop for the 4 valve clinic. There was a good turnout and a good time was had by all.
We all went away with some interesting and informative info. Even if you never plan on doing your own service, I highly recommend that if you ever have the chance you should attend one. It will give you great insight to what actually goes on when you drop your bike off for service and why it sometimes costs so much.
Here's a few pics.
First off, this is a bike...
(http://i236.photobucket.com/albums/ff176/MonstermashS2R/4%20Valve%20Clinic%20at%20Clubhouse/4ValveClinic001.jpg)
This is Ducpainter's track bike. When we arrived this is what it looked like as Eric had already removed most of the body work. It didn't look like this for long.
(http://i236.photobucket.com/albums/ff176/MonstermashS2R/4%20Valve%20Clinic%20at%20Clubhouse/4ValveClinic003.jpg)
Along with a detailed discussion on the valve adjustment check and adjust procedure we also were treated to a short discussion on general maintenance including tire pressure, oil changes, and chain adjustment.
Here's Eric with one of the more advanced tools..... [laugh]
(http://i236.photobucket.com/albums/ff176/MonstermashS2R/4%20Valve%20Clinic%20at%20Clubhouse/4ValveClinic004.jpg)
Ducpainter looking thrilled, as always.
(http://i236.photobucket.com/albums/ff176/MonstermashS2R/4%20Valve%20Clinic%20at%20Clubhouse/4ValveClinic010.jpg)
Eric is amazing at his job, and don't let anyone ever tell you he can't multitask!
(http://i236.photobucket.com/albums/ff176/MonstermashS2R/4%20Valve%20Clinic%20at%20Clubhouse/4ValveClinic013.jpg)
Eric had our undivided attention.
(http://i236.photobucket.com/albums/ff176/MonstermashS2R/4%20Valve%20Clinic%20at%20Clubhouse/4ValveClinic014.jpg)
I've seen Ducpainter ride at the track. Forget MLB, we needed to test his bike for steroid use.... fill it to the second line please!
(http://i236.photobucket.com/albums/ff176/MonstermashS2R/4%20Valve%20Clinic%20at%20Clubhouse/4ValveClinic018.jpg)
I guess Dr. Desmo had more important things to do....
(http://i236.photobucket.com/albums/ff176/MonstermashS2R/4%20Valve%20Clinic%20at%20Clubhouse/4ValveClinic020.jpg)
Find something you love and you'll never work a day in your life... He just looks so happy!
(http://i236.photobucket.com/albums/ff176/MonstermashS2R/4%20Valve%20Clinic%20at%20Clubhouse/4ValveClinic021.jpg)
Come on you piece of &*%@! "Usually it comes off easier than this"
(http://i236.photobucket.com/albums/ff176/MonstermashS2R/4%20Valve%20Clinic%20at%20Clubhouse/4ValveClinic022.jpg)
"Oh....now I get it...."
(http://i236.photobucket.com/albums/ff176/MonstermashS2R/4%20Valve%20Clinic%20at%20Clubhouse/4ValveClinic025.jpg)
If you'll just look right here.....
(http://i236.photobucket.com/albums/ff176/MonstermashS2R/4%20Valve%20Clinic%20at%20Clubhouse/4ValveClinic041.jpg)
Why NOT to use an impact gun to get your sidestand off. Apparently the previous owner just didn't get it.
(http://i236.photobucket.com/albums/ff176/MonstermashS2R/4%20Valve%20Clinic%20at%20Clubhouse/4ValveClinic028.jpg)
"Oh yeah baby......... how does that feel?" "You want some more?"
(http://i236.photobucket.com/albums/ff176/MonstermashS2R/4%20Valve%20Clinic%20at%20Clubhouse/4ValveClinic029.jpg)
"I wish I was just a little taller..." I didn't know Gage was only 5'1" Lol.
(http://i236.photobucket.com/albums/ff176/MonstermashS2R/4%20Valve%20Clinic%20at%20Clubhouse/4ValveClinic031.jpg)
Now where did I put that Frakken tool?
(http://i236.photobucket.com/albums/ff176/MonstermashS2R/4%20Valve%20Clinic%20at%20Clubhouse/4ValveClinic036.jpg)
Clubhouse Motorsports has it's own Statue of Liberty.
(http://i236.photobucket.com/albums/ff176/MonstermashS2R/4%20Valve%20Clinic%20at%20Clubhouse/4ValveClinic037.jpg)
Quote from: Monstermash on March 21, 2009, 08:01:32 PM
I guess Dr. Desmo had more important things to do....
(http://i236.photobucket.com/albums/ff176/MonstermashS2R/4%20Valve%20Clinic%20at%20Clubhouse/4ValveClinic020.jpg)
I was actually texting another person at the seminar saying "Tom is taking too many pictures" ;D
Adam
Looks like fun!! [moto]
I'm jealous!!
Quote from: Monstermash on March 21, 2009, 08:01:32 PM
<snip>
Ducpainter looking thrilled, as always.
(http://i236.photobucket.com/albums/ff176/MonstermashS2R/4%20Valve%20Clinic%20at%20Clubhouse/4ValveClinic010.jpg)
I was thrilled on the inside. ;D
Quote from: ducpainter on March 21, 2009, 08:52:48 PM
I was thrilled on the inside. ;D
[laugh] [laugh] Be careful none of that leaks out!! [laugh] [laugh]
Quote from: Monstermash on March 21, 2009, 08:01:32 PM
Ducpainter looking thrilled, as always.
(http://i236.photobucket.com/albums/ff176/MonstermashS2R/4%20Valve%20Clinic%20at%20Clubhouse/4ValveClinic010.jpg)
New picture caption: Nate looked thrilled as the group counted the number of flaking rockers together... One, Two, Three...
Quote from: gage on March 22, 2009, 07:09:05 PM
New picture caption: Nate looked thrilled as the group counted the number of flaking rockers together... One, Two, Three...
..and that's just the vertical cylinder. [bang] [bang] [bang]
is that Sam Elliott?
Wish I was there :( The shop looks great, Eric.
This looks like a complete blast. Where are you guys located? seminar open to the public? the cost to attend?
I noticed one of you gentlemen wearing a california sweatshirt. :( no east coast love i guess, what else is new!
Quote from: redial on March 23, 2009, 06:48:37 AM
This looks like a complete blast. Where are you guys located? seminar open to the public? the cost to attend?
I noticed one of you gentlemen wearing a california sweatshirt. :( no east coast love i guess, what else is new!
No shortage of east coast love here.
http://www.clubhousemotorsports.com (http://www.clubhousemotorsports.com)
Press the "Clubhouse Events" button.
Quote from: gage on March 22, 2009, 07:09:05 PM
New picture caption: Nate looked thrilled as the group counted the number of flaking rockers together... One, Two, Three...
[laugh]
Ah, the joys of the 4V ...
Adam
Quote from: DrDesmosedici on March 23, 2009, 07:04:45 AM
[laugh]
Ah, the joys of the 4V ...
Adam
You should know. You just bought one......... again! [roll]
Quote from: redial on March 23, 2009, 06:48:37 AM
I noticed one of you gentlemen wearing a california sweatshirt. :( no east coast love i guess, what else is new!
Not at all. Clubhouse MS is in New Hampshire! [thumbsup]
Quote from: Monstermash on March 23, 2009, 12:52:12 PM
You should know. You just bought one......... again! [roll]
Yep! No complaints here ;D
Adam
Quote from: gage on March 22, 2009, 07:09:05 PM
New picture caption: Nate looked thrilled as the group counted the number of flaking rockers together... One, Two, Three...
..4..5 [bang]
You look quite relaxed for someone that got bad news :o
Quote from: DrDesmosedici on March 24, 2009, 06:01:28 AM
5 total? Ugh :-\
Adam
Yeah...it wasn't in the plan.
One consolation is now I can bust on my buddy about the POS he sold me. ;D
Quote from: ducpainter on March 24, 2009, 06:10:08 AM
Yeah...it wasn't in the plan.
One consolation is now I can bust on my buddy about the POS he sold me. ;D
That sucks!
However, in good news, I did my valves last night and didn't have any ;D I'm just happy to have made it through another year
Quote from: gage on March 24, 2009, 10:15:41 AM
That sucks!
However, in good news, I did my valves last night and didn't have any ;D I'm just happy to have made it through another year
Gage -
Making it up to next Saturday's seminar?
Adam
Quote from: DrDesmosedici on March 24, 2009, 10:43:12 AM
Gage -
Making it up to next Saturday's seminar?
Adam
Yeah I'm planning on it No bike though and my suspension components look like this :'(
(http://i49.photobucket.com/albums/f286/Stefans3401/DSC_0121.jpg)
So what's wrong with using an impact wrench to loosen the side stand fastener?
(BTW, nice hard-anodized parts!! ^^^ [thumbsup])
Quote from: pompetta on March 24, 2009, 05:17:06 PM
So what's wrong with using an impact wrench to loosen the side stand fastener?
(BTW, nice hard-anodized parts!! ^^^ [thumbsup])
Notice the broken bolt in the case. (unlike metals and all that) Perhaps you were being sarcastic and I missed it, has been know to happen.
Quote from: Monstermash on March 24, 2009, 09:08:19 PM
So.... is it for sale now?
Sale and steal are two different things....
and no... ;)
Quote from: needtorque on March 24, 2009, 05:48:05 PM
Notice the broken bolt in the case. (unlike metals and all that) Perhaps you were being sarcastic and I missed it, has been know to happen.
No sarcasm, that was a real question.
Well, if it's stuck isn't an impact wrench safer than torque-ing the shit outta it with a ratchet?
Quote from: pompetta on March 25, 2009, 04:39:10 AM
No sarcasm, that was a real question.
Well, if it's stuck isn't an impact wrench safer than torque-ing the shit outta it with a ratchet?
Probably would have broken anyway.
A ratchet will tell you it's stuck so you can take evasive action.
.... By putting the impact on it. [laugh]
Quote from: ducpainter on March 25, 2009, 04:33:44 AM
Sale and steal are two different things....
and no... ;)
Are you implying that I would be looking for a good deal? [laugh]