Ducati Monster Forum

Bernard is getting ready to offer the SUPANOVA to the public once again! First he's filling orders from people who he refunded a while back (like me), and then he'll be taking orders from everyone else in the next few weeks.  I am so stoked!!  For those of you who don't know what this is, check out pics and vid here:

http://www.vizi-tec.com/SUPANOVA/SupaNova_Pictures.htm (http://www.vizi-tec.com/SUPANOVA/SupaNova_Pictures.htm)

 The startup sequence RULES!!!  I will post up pics and vid as soon as I receive it and get it installed.

OK, how much? It says on their website they have to wait until they clear the backlog (45-60 days)...

I think that page has been up there for the last nine months or so since he moved out west.  Prices did bump up a bit due to increased production costs, so that kind of sucks but is understandable.  Top of the line with brake flasher and license plate light is a little over 300 shipped.  Base model is about 250 shipped.  What he told me is that he will be posting up for regular sale in the next two weeks or so. 

WHOA.
http://www.vizi-tec.com/SUPANOVA/IMAGE/SN490I-vid.wmv (http://www.vizi-tec.com/SUPANOVA/IMAGE/SN490I-vid.wmv)

Unimpressed with the turn signals. Given that he's got it setup to do that swoosh for the awesome startup sequence, it woudl be better if the turn signal were half the with of the light as a repeted swoosh in the given direction in orange when selected as oppsed to blinking leaving the other half red like the clear alternatives LED.

(http://clearalternatives.com/Merchant2/graphics/00000001/CTL-0023-IT.jpg)
                --------->swooshing repetedly

Its all a matter of preference I guess. I don't like the CA lights because the separation of the signals for me isn't adequate.  I've seen lights that do a swoosh and it almost seems distracting rather than letting someone know that you are definitively planning on making a turn.  Not sure about the legality of something other than a standard blinking blinker in every state.  If a cop wanted to be a hardass he could probably make a case against anything other than a commonly recognized flashing turn signal.

I've just printed the dimension sheet to see if this will work on the 696.

I would buy one only if it plays that music. ;D

I have the SUPANOVA (first one Bernard made in some time) and it is 100% worth it.  The video doesnt do it justice, and I have had people who were behind me on the street come up next to me at the light saying how visible the light is, especially the flasher.

 I'm sorry but anyone who pays that much for a brake light has rocks in his head.  ???

I will happily accept rocks in my head when the brake flashing algorithm saves my ass from someone who might otherwise have missed the first two seconds of my brake light because they were changing songs on their IPod while driving right up my ass.

The rest of the unit is just all bonus coolness baby...   8)

I'm sure that Bernard would love to have a much lower price (for people without rocks in their heads).  But until someone shows up with a minimum order of 2500+ units (paid in advance) to allocate manufacturing in the Far East (and bulk rate part costs) -- he is going to have to make them on his workbench in very small batches and assemble, Q/A test and program each one individually. (note: Take a close look at one and notice the 550+ small components there -- it isn't a trivial task to assemble nor test each component beforehand) The way I look at it, this is a premium light offering available for those who desire and want it. Some might consider it as "safety gear" for the attention it gets and consider it an investment in that alone worthwhile.  Everyone that I know that has one installed would never remove it after the comments they get from motorcyclists and non-motorcyclists alike.

Only folks I wouldn't recommend this light to are the folks who don't want to be seen while riding or who try to evade the police. (This taillight would give you up especially at night even at long distance!)

I'm just glad to see a quality product that is needed within the community and is produced by an enthusiast who has a love for Ducati's.

That thing is awesome! At least here in AZ it is legal to have an integrated tail light. As far as price, I think that $250 for a hand made light is not bad at all.  That is a lot of parts to assemble.

Actually Bernard told me it is 700+ individual parts by hand...  [bow_down] [bow_down]

<smartass>

My brake lights flash when i come to a stop as well...
I have this awesome algorithm worked into my right hand...
Squeeze Squeeze Squeezity Squeeze.
Seems to be working... Wireless too!

</smartass>

(That being said, i still want one of these brakelights.... just too much $$ for me right now)

I do the same ...err... handjob...no...handaction...?... as well when I'm at a stoplight.

I like to pretend I'm riding another bike and use my left hand... [moto]

Yep, here it is:

http://vizi-tec.com/GENERAL_INFORMATION.htm (http://vizi-tec.com/GENERAL_INFORMATION.htm)

I have this incorporated into my SUPANOVA, along with the license plate light which is why it is over $300 rather than $250.

Oh boy I have been patiently waiting for him to start making these again. Where do I sign?

[evil]   SIgn here in blood__________    [evil]

I love mine and it has saved my ass already....the video does'nt do it justice at all...it will light up everyone behind you before the sun goes down...at night...be careful a plane does'nt try to land on you [moto]

(http://img.photobucket.com/albums/v138/alienfocus/Ducati__S2R_Tail.jpg)

(http://img.photobucket.com/albums/v138/alienfocus/100_0858.jpg)

(http://img.photobucket.com/albums/v138/alienfocus/IMG_1531.jpg)

(http://img.photobucket.com/albums/v138/alienfocus/100_0853.jpg)

 [clap]

Mine is hopefully shipping today or tomorrow, so I'll have it on by next weekend.

Bernard sent me a little teaser pic of my unit after bench testing

(http://i227.photobucket.com/albums/dd198/Chchadder/Smoked-inhand_600px.jpg)

It arrived today and looks friggin' sweet!  Going to install it tomorrow, so I'll take some pics and vid and post up.

Gotta love the two Ducs in the background too...

I just ordered mine.  I've been waiting for this tail light for almost a year.  [thumbsup]

+1,  I can't wait to get this light!

The last thing I was waiting for on the tail chop!  SWEET

Ordered Mine! can't wait!

I'm freaking jealous! It's a shame these guys wont work on the 696. Enjoy the lights guys...just post some pics.

Sidenote Question: How did you get this pic? The black background, both signals appear to be on? Bike seemingly floating? Explain your master photography skills.

Just a couple quick phone snaps right after install and a shaky phone vid after dark.  I'll post up some better stuff once I get back in town Sunday.

(http://i227.photobucket.com/albums/dd198/Chchadder/Photo0025.jpg)

(http://i227.photobucket.com/albums/dd198/Chchadder/Photo0027.jpg)

(http://i227.photobucket.com/albums/dd198/Chchadder/th_SUPANOVA.jpg) (http://s227.photobucket.com/albums/dd198/Chchadder/?action=view&current=SUPANOVA.flv)

Most likely taken during the startup sequence.  As for alienfocus's remaining photog skills, bravo man!

Yes, and more pics or ban  [clap] [clap] [clap] [clap] [clap]

 [laugh] One of our members in our owners club is a professional photographer and had posted he needed some Duc's for a shoot...and I jumped on it as I always wanted pro shots of my beloved Monster. The image of both signals on are probably a mix of individual pics of the signals meshed together as well as the pic of the dash lights. The dash shot is used by SpeedyMoto to show their risers ( http://www.speedymoto.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=03-0220BLK&Category_Code=MTC (http://www.speedymoto.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=03-0220BLK&Category_Code=MTC)) ...love the gang at Speedymoto and also Manny at Leo Vince...and of course.... [bow_down] BERNARD!!!!! He tolerated me harassing him for this light as soon as I saw it and set me up big time...the pics still do not show the awesome quality and how well this light works.

(http://img.photobucket.com/albums/v138/alienfocus/Ducati__S2R.jpg)

(http://img.photobucket.com/albums/v138/alienfocus/Ducati_S2R_lowerexhaust.jpg)

(http://img.photobucket.com/albums/v138/alienfocus/Ducati_S2R_Exhaust.jpg)

(http://img.photobucket.com/albums/v138/alienfocus/Ducati_S2R_Bar.jpg)

 

...and the rest

(http://img.photobucket.com/albums/v138/alienfocus/Ducati_S2R_DiskBrake.jpg)

(http://img.photobucket.com/albums/v138/alienfocus/Ducati_S2R_EngineDetail.jpg)

(http://img.photobucket.com/albums/v138/alienfocus/Ducati_S2R_RearTire.jpg)

(http://img.photobucket.com/albums/v138/alienfocus/Ducati__S2R_Tail.jpg)

Wow!!!!!!!!!!!!!!!!!!!!!!!!!! [bow_down]

wow, alien, your bike got the supermodel treatment.  just gorgeous.

I've got the same model as you, and I also have the SupaNova tail light installed. Of course, Bernard hit me with a "but wait, there's more" and on an impulse, I bought his license plate bracket. It's machined aluminum and anodized black.  Since I got rid of the rear turn signals, this bracket really cleans up the rear end. The light doesn't get hit by the seat like my homemade version. The license plate sits up tight to the light, which has a row of LEDs to light it. It fit perfectly and Bernard even included stainless hardware. I'm definitely happy with the add-on.

Here's a stock photo of the bracket.
(http://www.vizi-tec.com/SUPANOVA/IMAGE/Back-Left_800px.jpg)

I'll post some of it installed soon.

Yeah, that is really hot and I thought about picking that up as well but couldn't go beyond what I already laid out for the light.  I may just pull of my chop kit and give it a good rattlecan job one of these days to compensate...

Just installed mine this weekend on my '97 M900.  A little bit of splicing wires as it is not plug n' play...yet, as this is the first one that Bernard said he made for an older Monster like mine. 

I see from the pictures (the top down) that the taillight does not protrude past the end of the seat.  Mine does by a little bit, unless yours is actually covered by the cowl.  I ditched my cowl.  I would have bought the license plate frame, but had purchased one previously on eBay. 

Hahahaha!

CHUD!

My nickname from the war.  Cleared a lot of bunkers...

Sorry man.

My only reference point is C.H.U.D. (http://www.imdb.com/title/tt0087015/)

For those who don't know, that's Cannibalistic Humanoid Underground Dweller.

If your time in the service earned you that nickname, then I'm sorry. You must have seen some hellish conditions and I absolutely respect the sacrifice you're made for your country.

But honestly, that's a horrible movie. Referencing it made me laugh.

Stay well,

AT2 Gilbert, USN.

I appreciate the condolences, but never actually ate anyone over there. They wouldn't have been too tasty anyway after being out in the desert with no food for five months.  I did smoke some dead man's cigarettes though...

Got my SupaNOVA light installed, looks friggin sweet!  Bright as hell, fits perfect.  Unexpected problem: Aftermarket LED front turn signals must have resistors for the NOVA to signal properly.  I should have done this a long time ago, but i just got used to the Rizomas blinking fast.  Ah well small detail that is easily fixed. 

Side note, Bernard (owner/maker of lights) is great to deal with.  Fast responses ,(and shipping too) courteous, he puts that personal touch into his business.  I opened up the box and there was a little post-it note from Bernard saying tanks and enjoy, etc.  Its little things like that that make me feel good about spending my money on the light. 

Yep, Bernard is a one of a kind.  Sent me a pic of my unit to drool over while it was in transit, and marked my box #53 with a post-it as well.   [thumbsup]

And my order is in and hopefully shipping soon!  Get some pics when installed.

Lou

Well.  This was the easiest mod to install to date.  Complete plug n play.  Bernard was a pleasure to do business with and the product is top notch.  Anyone sitting on the fence for this light should just do it.  It is pricey but you get what you pay for.  No cheap stuff for my Duc.  I'll try n post pics.

(http://i498.photobucket.com/albums/rr342/LousGix/IMG_2455.jpg?t=1240273984)
(http://i498.photobucket.com/albums/rr342/LousGix/IMG_2457.jpg?t=1240274085[img][img]http://i498.photobucket.com/albums/rr342/LousGix/IMG_2456.jpg?t=1240274138)

(http://i498.photobucket.com/albums/rr342/LousGix/IMG_2456.jpg?t=1240274138)
(http://i498.photobucket.com/albums/rr342/LousGix/IMG_2454.jpg?t=1240274204)

Sikduc...looks good, but I'd like to see that license plate tucked tight up to the tailight - closing that open space. 

I've got the same chop kit, the CompWerks.  I plan on chopping it to lose that space, and actually move it back as well to have the light flush with the cowl and seat.

I agree and was already thinking about modding mine or just buying Bernard's  [beer] 

+1 on the Supernova and kits Bernard sells

Got mine a while back.  It is first rate and the install couldn't be any easier.

One thing to keep in mind though if you use Rizoma or LED indicators.  You will need the resistors installed on those or the nova will blink both sides when the signal is pushed for left or right (picture a cars hazards lights).

Bernard and I discussed this and the reason is he has built in a resistor for his light but decided against the cost and weight of building it in for other possible lights as well. 

Again if you use LED for your front signals you will need to use resistors for the Nova to work properly.  If you're not sure what I'm talking about go here

http://www.monsterparts.com/pc/07-H505R/Electrical/07-H505R.html (http://www.monsterparts.com/pc/07-H505R/Electrical/07-H505R.html)

(http://www.monsterparts.com/mm5/graphics/00000001/07-H505R-2.jpg)

Cheers.