|
Title: Clip ons for Cycle Cat top triple Post by: Yellow Meanie on March 26, 2009, 04:17:54 AM I have recently purchased a Cycle Cat top triple from Ca-Cycleworks [thumbsup]
Now all I need is some clip ons to suit. The issue is that they are quite chunky on the leading edge. As such, a clip on with risers in front of the triple will not fit, unless they are spaced about 19mm away from the fork tube. (http://i319.photobucket.com/albums/mm441/Zook_2008/The%20Monster/triple.jpg) So, I was thinking about the new Speedy Moto Tall-boys, but I think they may be a little too high. Can anyone suggest some clip ons that are side mounted with about 2.5" rise? Title: Re: Clip ons for Cycle Cat top triple Post by: DarkStaR on March 26, 2009, 06:44:40 AM So, I was thinking about the new Speedy Moto Tall-boys, but I think they may be a little too high. Can anyone suggest some clip ons that are side mounted with about 2.5" rise? You could just mount them lower on the fork tubes (i.e. not flush with the bottom of the triple). Title: Re: Clip ons for Cycle Cat top triple Post by: A.duc.H.duc. on March 26, 2009, 08:46:40 AM You could just mount them lower on the fork tubes (i.e. not flush with the bottom of the triple). Well then he might as well just get some cheaper clip-ons without risers. I think the point is he want's the bars higher. I used to have the CC clip-ons. I know they aren't making them anymore, and they aren't the easiest to come by, but I bet you could find some. Justin Title: Re: Clip ons for Cycle Cat top triple Post by: EEL on March 27, 2009, 10:50:23 AM I have a DTC-7 Triple w/ the riser assembly and clipons They mount to the top of the triple. I dont know if this will work with your triple because you didnt mention a model number
Problem is everything is black.. Title: Re: Clip ons for Cycle Cat top triple Post by: CannedIce on March 30, 2009, 11:38:45 AM Have you heard of ConvertiBars? They allow you complete adjustability when it comes to the height of the clip-ons. We are dealers for them if you are interested http://www.convertibars.com/Products.cfm (http://www.convertibars.com/Products.cfm)
We can get you free shipping!! Let me know. Thanks, Candice Title: Re: Clip ons for Cycle Cat top triple Post by: ThelmaLou on March 30, 2009, 07:21:33 PM http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=330317122196&sspagename=STRK%3AMESELX%3AIT&viewitem= (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=330317122196&sspagename=STRK%3AMESELX%3AIT&viewitem=)
pretty sure these would work(if you have 50mm forks) they would look great too! [thumbsup] |