Print Page - replacing fuel sender

Title: replacing fuel sender
Post by: Bones on April 13, 2009, 02:08:36 PM

OK, so i had another tank apart last month, but now I don't remember the answer to my own question, so I need to ask you guys.

I need to replace the fuel sender on my M620 and I'm thinking all I need to do is drain the tank, unscrew the sender form the base, disconnect the plug and install new sender.

it looks like the wire is long enough on the sender to accommodate this.

Is this right?

I REALLY, REALLY don't want to go in through the top!

Thanks in advance!

Title: Re: replacing fuel sender
Post by: mookieo2 on April 13, 2009, 04:14:53 PM

You still have to disconnect it from the fuel pump if its a FI bike. Unless you have really skinny arms and hands you have to go in through the top to disconnect and reconnect it.

Title: Re: replacing fuel sender
Post by: Bones on April 13, 2009, 05:37:04 PM

dammnit! unless I hire a midget with long arms ;)

Quote from: mookieo2 on April 13, 2009, 04:14:53 PM
You still have to disconnect it from the fuel pump if its a FI bike. Unless you have really skinny arms and hands you have to go in through the top to disconnect and reconnect it.

Ducati Monster Forum

Moto Board => Tech => Topic started by: Bones on April 13, 2009, 02:08:36 PM