Anyone put these on before? When I first looked at them I thought I didn't have to take anything off. But now it looks like the headlight and fairing are going to have to come off. Then it looks like clearance issues will still happen. Anyone run into problems with these before? There going on my S4Rt
Any suggestions? They have a 2.5" rise on them and can be "cliped on" without having to take the forks out. Thanks everyone.
I did this mod.
I'm happy with them, but you should check my thread http://ducatimonsterforum.org/index.php?topic=20222.0 (http://ducatimonsterforum.org/index.php?topic=20222.0)
You'll probably not need to take anything off - there's access to all the bolts without removing stuff.
Ask me if anything is unclear [thumbsup]
Quote from: stopintime on April 14, 2009, 01:11:03 PM
I did this mod.
I'm happy with them, but you should check my thread http://ducatimonsterforum.org/index.php?topic=20222.0 (http://ducatimonsterforum.org/index.php?topic=20222.0)
You'll probably not need to take anything off - there's access to all the bolts without removing stuff.
Ask me if anything is unclear [thumbsup]
Thanks for the write up. Big help.
Worked out good! Thanks for the help everyone. I would show you but can't figure out how to post photos on this forum.
(//)
post on photobucket, then just post some links. I'm curious as to how this turned out b/c I'm on the fence between the 3.5 and 2.5 risers.
Quote from: Bones on April 17, 2009, 04:31:06 AM
post on photobucket, then just post some links. I'm curious as to how this turned out b/c I'm on the fence between the 3.5 and 2.5 risers.
Swatt will probably sell you an extra set of the riser parts, so can have both to play with. To swap between the two is quite easy.
My guess is that you might even get the opportunity to buy both lengths, just to return the one you don't like.