Print Page - 1098 wheels on a S2R 800

Title: 1098 wheels on a S2R 800
Post by: Ontario_Monster on April 17, 2009, 09:50:01 AM

Anyone know if the wheels from the 1098 will fit on a S2R 800? Are they using the same size axel?

Thanks in advance.

Cheers

Title: Re: 1098 wheels on a S2R 800
Post by: TAftonomos on April 19, 2009, 02:19:05 PM

Completely different axle. Front won't work either as it's using the 5 bolt rotors w/different offset.

848, hypertard should work. Hyper S is the only forged aluminum option from OEM ducati.

Title: Re: 1098 wheels on a S2R 800
Post by: NAKID on April 19, 2009, 05:39:33 PM

Why would the 848 wheels work but not the 1098?

Title: Re: 1098 wheels on a S2R 800
Post by: Pedro-bot on April 19, 2009, 06:47:43 PM

Quote from: NAKID on April 19, 2009, 05:39:33 PM
Why would the 848 wheels work but not the 1098?

The rear axle is different, larger on the 1098.

Title: Re: 1098 wheels on a S2R 800
Post by: Ontario_Monster on April 20, 2009, 05:47:12 AM

Thanks, actually I'm looking for wheels with the 5 bolt pattern as I've purchased an S4Rs full frontend. Probably have to see if I can find S4R wheels then.

Cheers everyone and thanks for the responses.

Title: Re: 1098 wheels on a S2R 800
Post by: TAftonomos on April 20, 2009, 06:20:04 AM

Ya know I've got this forged front marchesini that will bolt up :)

I also have a set of s4rs/t wheels (same same) too. Hell, I've even got a set of pilot powers w/500 miles on them, can set you up :D

Ducati Monster Forum

Moto Board => Tech => Topic started by: Ontario_Monster on April 17, 2009, 09:50:01 AM