Ducati Monster Forum

Local Clubs => OZ monsters => Topic started by: ollie on May 15, 2009, 03:13:15 AM



Title: what to look for when buying a used 620
Post by: ollie on May 15, 2009, 03:13:15 AM
I'm still on the hunt for my first monster, I've decided to get a 620. For those of you who have previously owned one any tips, or anything to look out for. I realise that some were released in the resricted LAMS guise, but are there any other difference between the various year models??



Title: Re: what to look for when buying a used 620
Post by: mattyvas on May 15, 2009, 04:06:27 AM
There are some in the 2005 model range that came with gold line 4 pot calipers instead of the black 2 potters.
Buying a 620 is pretty much the same as buying any used bike though.
Guess you gotta look for frame damage/nick's see if there is any crash history.
Being a 620 it is possible as they are learner legal.

Mine was an 05-620 w/gold lines. It also happened to be a repairable write off, but was very straight.


Title: Re: what to look for when buying a used 620
Post by: bmroxm5 on May 15, 2009, 05:11:17 AM
I too had the pleasure of owning one, only let her go recently as a matter of fact.

I believe the slipper clutch was introduced on the 05 models. As a noob rider I appreciated the slipper, especially with the strong engine braking in the v-twins.

Are you on your L's... what's the basis for choosing a 620 monster?


Title: Re: what to look for when buying a used 620
Post by: Betty on May 15, 2009, 12:51:00 PM
There are some in the 2005 model range that came with gold line 4 pot calipers instead of the black 2 potters.

Which means up until the changeover date in 2005 all the 620s (I believe the first of the fuel injected 'little bikes') would have the goldlines.

I believe the slipper clutch was introduced on the 05 models.

The earlier ones from 2002 did not have the APTC 'slipper clutch'.


Title: Re: what to look for when buying a used 620
Post by: dragonworld. on May 15, 2009, 04:13:44 PM
New brake and clutch levers, brake and gear change pedals also are a give away that at the minimum a fall over has happened!!

Scrapes at the edges of the mirrors, and new bar ends also can give some onfo as to what might have occured in the past!!  ???

And imagine the bike on its side and what would be touching down and look for signs/marks that its been over. [roll]

Chain/wheel alignment is also a potential indicator of damage, so either a trammel or a simple piece of string will assist in checking for twists and bends.  :o


Title: Re: what to look for when buying a used 620
Post by: bigfella on May 16, 2009, 12:12:02 AM
what is your price range??
are you in sydney??
i have a 620 dark 2005, almost 12,000 on the clock
termi's installed
has been knocked over (stupid prick in a suv could'nt see it) was fixed at fraisers EVERYTHING REPLACED that was damaged they even replaced the bars a couple of weeks after as i thought they didn't feel right
new back tyre 3 months ago
all services done at frasiers
well looked after
and still lams registered

might sell for the right price


Title: Re: what to look for when buying a used 620
Post by: ollie on May 16, 2009, 01:34:13 AM
woohoo!!! ........................rode my first monster today a 2002 620 [moto]
Riding position felt great, height was good it felt just right. After only having ridden 250's before ,the power felt more than enough and I think at this stage of my riding career that the 620 is just what I'm after.

This monster  only had 15K on it and was in fairly standard form with the only mods a set of staintunes, the guy had owned it since new so thats a bonus, but...............the tank was dinged from a stationary drop, the paint was fairly scratched around the keyhole and the engine and chain looked like it had never seen a clean so it obviously hadn't been loved as much as it deserved.

Overall it was alright and a hoot to ride but I think he was aking too much for the condition it was in and its age.

Now just have to find more monsters to have a look at and compare

bigfella, I'll send you a PM


Title: Re: what to look for when buying a used 620
Post by: mattyvas on May 16, 2009, 02:26:28 AM
Good news Ollie.

What was the guy asking? I think I remember it from when I was advertising mine.
Happy hunting for your 620 if you're after someone to come looking with you just ask.
Not that I am a Mecho or anything but another set of eyes always helps, specially when it comes to haggling price.



Title: Re: what to look for when buying a used 620
Post by: Spider on May 16, 2009, 02:55:32 AM
and be patient!

you now know what you want, take you're time and get the right one at the right price!

well done....sounds like a good relationship already!

I remember the chain on my first...I naturally assumed it was black...until I started to clean it...it turned out to be a gold D.I.D! By the time i'd given it the old love tug it looked like something the aztecs would have worshipped.


Title: Re: what to look for when buying a used 620
Post by: ollie on May 16, 2009, 02:59:32 AM
Good news Ollie.

What was the guy asking? I think I remember it from when I was advertising mine.
Happy hunting for your 620 if you're after someone to come looking with you just ask.
Not that I am a Mecho or anything but another set of eyes always helps, specially when it comes to haggling price.



the bloke wanted 9500 for it.
Thanks for the offer, I'm down in the ACT and not that many monsters come up for sale so syd is probably the best option. It would be handy if one does come in sydney if someone could check it out for if it was nearby before I came up to have look.


ollie


Title: Re: what to look for when buying a used 620
Post by: Spider on May 16, 2009, 02:59:55 AM
Hey Ollie...what's up with the name? You skate?

(forgive me if that is your actual name!)



oops....you signed off 'Ollie' whilst I was typing. There you go!


Title: Re: what to look for when buying a used 620
Post by: dragonworld. on May 16, 2009, 05:06:06 PM
and be patient!

you now know what you want, take you're time and get the right one at the right price!

well done....sounds like a good relationship already!

I remember the chain on my first...I naturally assumed it was black...until I started to clean it...it turned out to be a gold D.I.D! By the time i'd given it the old love tug it looked like something the aztecs would have worshipped.

Hmmm "Love Tug" Spider??  [evil]

The imagination runs riot with that little pearl !!  ;D [cheeky]  [thumbsup]


Title: Re: what to look for when buying a used 620
Post by: brad black on May 17, 2009, 02:53:49 AM
the 6 speed ones have the aptc clutch, which has a much lighter lever effort, like a s2r 800.  i had one in last week, it was a late 04 build from memory.  i think it had black 2 piston calipers, now that matty mentions it.

i had to fit a u59 as it was bought without keys.  went really well, better than i remember other 620 going, and it was all std.  quite good fun really.


Title: Re: what to look for when buying a used 620
Post by: Spider on June 02, 2009, 04:08:20 AM
good evening gentlemen...

Ollie....this is Super

Super....this is Ollie....

Ollie, this gentlemen has a 620 for sale.....I'll leave it to you gentlemen to discuss this further

 ;)


Title: Re: what to look for when buying a used 620
Post by: Super T.I.B on June 02, 2009, 05:48:30 PM
good evening gentlemen...

Ollie....this is Super

Super....this is Ollie....

Ollie, this gentlemen has a 620 for sale.....I'll leave it to you gentlemen to discuss this further

 ;)

Oh, that person from Canberra.  ;D

I'm actually in Picton, Ollie, so you don't have to go as far.


Title: Re: what to look for when buying a used 620
Post by: ollie on June 03, 2009, 01:10:45 AM
good evening gentlemen...

Ollie....this is Super

Super....this is Ollie....

Ollie, this gentlemen has a 620 for sale.....I'll leave it to you gentlemen to discuss this further

 ;)

Spider thanks for the heads up [thumbsup]
Super check your PMs


Title: Re: what to look for when buying a used 620
Post by: goldFiSh on June 03, 2009, 01:17:55 AM
Spider thanks for the heads up [thumbsup]
Super check your PMs


Spider = the ducati match maker  [laugh] ...... pity he took so long to sort out his own match up, but glad he's back to  [moto]


Title: Re: what to look for when buying a used 620
Post by: Spider on June 03, 2009, 02:01:19 AM
Spider = the ducati match maker  [laugh] ...... pity he took so long to sort out his own match up, but glad he's back to  [moto]

you're just lucky I didn't match US up....I really like YOUR bike....the m800 in red with a grey trellis frame.....classic beauty (unlike the rider!)

 [laugh]


Title: Re: what to look for when buying a used 620
Post by: goldFiSh on June 03, 2009, 03:14:35 AM
you're just lucky I didn't match US up....I really like YOUR bike....the m800 in red with a grey trellis frame.....classic beauty (unlike the rider!)

 [laugh]

Hey I resemble that  ;D I take that as a complement coming from you, I'd be very concerned if you found my even mildly arousing (not that there's anything wrong with that...)



Title: Re: what to look for when buying a used 620
Post by: bazz20 on June 03, 2009, 03:28:39 AM
talking about new bikes i think its about time we updated bikes of oz since people have got new bikes and the one that havent have had more bling so i reckon it wants to be stickyed  so when newbies arrive they will put ther bikes on just a thought ill get back in my box now  [thumbsup]


Title: Re: what to look for when buying a used 620
Post by: Spider on June 03, 2009, 03:37:23 AM
good idea Bazz.....I found it on page 3 I think whilst trying to find Ollie's thread (this one).

Speaking for myself (as opposed to all the speaking I do for others!)...will be a little while before I get a picture on there....the weather is great for the plants but not so good for pictures....unless your taking pictures of rainforests!


Title: Re: what to look for when buying a used 620
Post by: Super T.I.B on June 03, 2009, 05:55:42 PM
Spider thanks for the heads up [thumbsup]
Super check your PMs



PM sent.  ;)


Title: Re: what to look for when buying a used 620
Post by: ollie on June 04, 2009, 04:46:31 PM
The search is over ;D

Have just purchased a 2005 model, from a fellow DMF member. Well loved and a with a few very tasty mods.

Will post some pics when I pick the bike up on the W/end.

Thanks to everyone who helped out so far.



Title: Re: what to look for when buying a used 620
Post by: heatherp on June 04, 2009, 10:37:20 PM
aww I like stories with happy endings  [clap]


ollie =  ;D ;D ;D



Title: Re: what to look for when buying a used 620
Post by: bazz20 on June 05, 2009, 12:47:01 AM
congrats ollie welcome to the family , super hang in there mate and we need you here to keep us inline  [thumbsup]


SimplePortal 2.1.1