|
Title: Remapped the PCIII Post by: brimo on June 01, 2009, 01:14:48 PM Finally got round to getting the PCIII remapped, was running a canned map for ages, according to the graphs too lean down low and too rich up top, they found an extra few horses and a couple of extra foot-pound of torque, the main thing is though in the traffic, on and off throttle response is much smoother.
Title: Re: Remapped the PCIII Post by: Six95 on June 01, 2009, 04:32:08 PM Now that you have remapped - was the old map that much different to performance?
and when you were running the old map - was there ever that question of "this is not right"? Title: Re: Remapped the PCIII Post by: brimo on June 01, 2009, 06:28:06 PM Now that you have remapped - was the old map that much different to performance? The map I loaded originally was one from the Power commander site for an open airbox and stock exhaust, mine has open airbox and cored mufflers.and when you were running the old map - was there ever that question of "this is not right"? I noticed a big difference from stock with this setup, but from checking the plug and from the popping on overrun, I figured it was still running too lean. I have only had a short run on it since the remap but have noticed it seems to run a bit smoother down low, and rolling on and off throttle in traffic is smoother. Can't say I've noticed any increase in power, but it's only gone up from 74 to 77 and likewise only a couple of foot-pound torque. |