Text only | Text with Images

Ducati Monster Forum

Moto Board => Tech => Topic started by: Bergweiserus on June 16, 2009, 01:32:09 PM

Title: 696 Rear Axle Nut Torque...?
Post by: Bergweiserus on June 16, 2009, 01:32:09 PM
Hello All,

can someone give me the rear axle nut torque spec on the 696?  i've only worked on older monsters and not sure if it's the same.

(this afternoon i'm changing a 696's 15 tooth front to a 14 tooth)

thanks a ton!
:)
Title: Re: 696 Rear Axle Nut Torque...?
Post by: Bergweiserus on June 16, 2009, 02:11:12 PM
okay....i found 72NM and 8NM for the adjusters.....
Title: Re: 696 Rear Axle Nut Torque...?
Post by: 1313 on June 16, 2009, 02:20:43 PM
I just checked the service manual.. The rear axle nut has to be torqued to 83 Nm +/- 5% tolerance since it's classified as a "dynamic safety-critical point".

Edit to add Front Sprocket retaining screw is 6 Nm.
Title: Re: 696 Rear Axle Nut Torque...?
Post by: Bergweiserus on June 16, 2009, 02:35:24 PM
thank you very much!! 
Text only | Text with Images