Ducati Monster Forum

I'm interested in getting some higher clipons for my bike, which currently has 996 forks on it. I need to get clipons that are designed to fit the same upper diameter as my 996 forks.

As of now, I have stock clipons from a 999 installed (I just forgot what size diameter they are). 

The only Cyclecats I can find are designed for the old S4. What size was that? Will it fit?

http://www.oncycles.com/catalog.asp?r=1&pn=MCB00154 (http://www.oncycles.com/catalog.asp?r=1&pn=MCB00154)

Your forks are 53mm top and bottom.

Monster forks are 50mm top, 54mm bottom.

And those S4 parts won't work.

Thanks for the info. So I need 53 mm clipons... These were listed under the 53mm category, but I could not confirm their size. They are for a Multistrada 1000DS from 04-05.

This they might work?

https://www.oncycles.com/catalog.asp?r=1&pn=MCB00149 (https://www.oncycles.com/catalog.asp?r=1&pn=MCB00149)

I don't know the fork diameter on MTS....

Best to check with OnCycles before ordering.

To persevere in this a bit with respect to my bikes:

Will these (http://www.oncycles.com/catalog.asp?r=1&pn=MCB00154), intended for the (01 to 03) S4, fit a 2004 S4R?

Or, put another way, what's the S4 fork diameter at the top?  Same as the S4R, or not?

http://www.speedymoto.com/Merchant2/merchant.mvc?Screen=CTGY&Category_Code=SBKCL (http://www.speedymoto.com/Merchant2/merchant.mvc?Screen=CTGY&Category_Code=SBKCL)

Thanks, handy chart!

Also, I notice that the Tall Boys are in stock there now, finally!