|
Title: Anyone installed the K&N A/F meter? Post by: DJ on May 20, 2008, 10:17:02 AM Okay, so this may have already been covered on TOB, but I don't like going back there to find it, plus I'd rather the info get posted up here for future reference by other members. :)
Has anyone installed the K&N A/F meter that Chris sells (http://www.ducatitech.com/2v/aftermarket/img/kn_meters.jpg)? What are your experiences? I've been planning on rebuilding my FCRs (just to clean them up, etc while I have the engine out anyway), and thought that this would be a wonderful way to check on A/F mixtures for tuning. -dj Title: Re: Anyone installed the K&N A/F meter? Post by: ValveFloat on May 20, 2008, 10:37:02 AM IMO that particular unit is not very usefull as it is a narrowband O2 sensor. It will really only tell you if you are at stoich (14.7:1) or richer or leaner than stoich. Since you are probably not going to be trying to dial your carbs into stoich, you would be better off with a wideband AFR meter, although they are more expensive.
|