Print Page - Replacing end caps on Arrow CF cans?

Title: Replacing end caps on Arrow CF cans?
Post by: WhiteStripe on July 07, 2009, 06:19:12 AM

Does anyone have a link to instructions or a write-up on swapping out the end caps on an Arrow CF can.

Looking to put in the end-cap that will accept the DB killer.

Title: Re: Replacing end caps on Arrow CF cans?
Post by: redial on July 07, 2009, 10:13:22 AM

I dont even understand the concept of making things quieter [evil]

Title: Re: Replacing end caps on Arrow CF cans?
Post by: teddy037.2 on July 07, 2009, 11:35:28 AM

all you gotta do is drill out the rivets on the cap end of the exhaust can, swap the caps out and re-rivet.

cake [thumbsup]

Title: Re: Replacing end caps on Arrow CF cans?
Post by: WhiteStripe on July 07, 2009, 01:46:00 PM

Quote from: teddy037.2 on July 07, 2009, 11:35:28 AM
cake [thumbsup]

Not sure if you are being sarcastic or not? Drilling out the rivets seems simple - re-reviting has me stumped.

Title: Re: Replacing end caps on Arrow CF cans?
Post by: teddy037.2 on July 07, 2009, 03:14:10 PM

no, seriously. it's easy.

you will need one of these:

(http://www.matcotools.com/ProductImages/hp2.jpg)

to install the new rivets... I imagine any proper hardware store would carry it

Title: Re: Replacing end caps on Arrow CF cans?
Post by: WhiteStripe on July 08, 2009, 01:55:36 PM

Thanks - does anyone have some suggestions on rivet size etc. Little nervous about drilling down into the can...

Title: Re: Replacing end caps on Arrow CF cans?
Post by: Gus Duc on July 08, 2009, 03:41:35 PM

Here's a good link from ToB.....http://www.ducatimonster.org/forums/accessories-mods/175267-baffles-arrow-cabon-s2r1k-where.html (http://www.ducatimonster.org/forums/accessories-mods/175267-baffles-arrow-cabon-s2r1k-where.html)

Funny....... the guys name is Grazi [laugh] So thank him ;)

Ducati Monster Forum

Moto Board => Tech => Topic started by: WhiteStripe on July 07, 2009, 06:19:12 AM