|
Title: LSL 1.5" rise clip ons on M900? Post by: Chuck_V on July 10, 2009, 12:24:24 PM I am looking to mount these clip ons: http://www.spieglerusa.com/cfm/clipon.cfm?type=offset (http://www.spieglerusa.com/cfm/clipon.cfm?type=offset) on a '95 Monster 900. Clearance of the dash, headlight, etc. is not an issue as I am using aftermarket items. What I am worried about is whether or not the LSL items will clear the stock upper triple clamp. I want to mount the clip ons under the top triple, and I need to know if they will clear the pinch bolts on the triple. If anyone has done this or has any insight I would greatly appreciate it.
Title: Re: LSL 1.5" rise clip ons on M900? Post by: erkishhorde on July 10, 2009, 01:10:50 PM Sorry, not useful in regards to your question but I'm just loving the recent influx of threads on the mid 90s m900's. ;D
Title: Re: LSL 1.5" rise clip ons on M900? Post by: Bizzarrini on July 10, 2009, 01:23:52 PM I have those installed, but I'm using a cyclecat top triple, which has a flat part where the clip on goes, so no problems there! Couldn't tell you what the stock triple will do. I did have a lot of problems with the coffin fluid holders for brake and clutch, needed special spacers for them...
Good luck! Title: Re: LSL 1.5" rise clip ons on M900? Post by: Chuck_V on July 11, 2009, 11:52:32 AM I have those installed, but I'm using a cyclecat top triple, which has a flat part where the clip on goes, so no problems there! Couldn't tell you what the stock triple will do. I did have a lot of problems with the coffin fluid holders for brake and clutch, needed special spacers for them... Good luck! Is that with the stock front end? The only CycleCat triple I could find was for the SBK forks. Thanks! Title: Re: LSL 1.5" rise clip ons on M900? Post by: Bizzarrini on July 12, 2009, 12:08:50 PM Yup, I bought a 50mm triple via Oncycles.com. Keep an eye on this page:
http://www.oncycles.com/browse.asp?department=clearance&category=billetaccessories&subcategory=tripleclamps (http://www.oncycles.com/browse.asp?department=clearance&category=billetaccessories&subcategory=tripleclamps) Only thing I modified was lowering the instrument cluster and rerouting the cables and brake lines. It was a bit of a tight fit, but it looks way cool now! [thumbsup] Title: Re: LSL 1.5" rise clip ons on M900? Post by: lwszabo on July 12, 2009, 02:27:52 PM Sorry, not useful in regards to your question but I'm just loving the recent influx of threads on the mid 90s m900's. ;D everyone knows the OG Monster rule! |