Can you measure from the inside face of the right side passenger peg bracket to the edge of the tire?
I'm repairing a bent frame bracket, and I don't happen to have another S2R at hand to measure from.
I've got it to where it looks right, measures 5 3/8", but I'd rather not weld it till I'm more sure...
Weld away brotha, you're clear for take-off. [thumbsup]
Thanks, man. [beer]
Can I get another confirmation from another owner?
I'm a measure twice weld once kinda guy...
I have a S2R 800, Give me about 20 mins and I'll go and pop the bracket back on the bike and I'll measure it up for you.
It's 2:25 am here, but I can never resist a challenge....
5 3/8 it is! If that measurement is off, it would have to be less than 1mm wider than 5 3/8.
BTW, my Termis are very close to the bracket, so 1-2mm wider than 5 3/8 wouldn't be wrong. YMMV
Mine measure's the same, 5 3/8th's +/- a couple of mm's
Awesome, thanks all! [beer]
I'm surprised they're all so close, considering how long the passenger peg is.
Ducati Quality Control is better than I thought. ;D
Quote from: Speeddog on July 10, 2009, 05:04:27 PM
Awesome, thanks all! [beer]
I'm surprised they're all so close, considering how long the passenger peg is.
Ducati Quality Control is better than I thought. ;D
Thats about as much an oxymoron as military intelligence.