07 S2R1K - Will it work if I turn the handlebars upside down? [beer]
Come on ya'll... I'm sure some of you have done this. Before I start to loosen everything up i was looking for a little feedback... Thx! [roll]
Just found this;
http://ducatimonsterworldwide.org/index.php?topic=1442.0
but was looking for more info....
Duc and Cover did it to his S2R1k with and assist from Zooom and was pretty happy. It's not a big job, but you do have to drill new holes for the switch clusters.
Quote from: yuu on May 20, 2008, 07:30:37 PM
Duc and Cover did it to his S2R1k with and assist from Zooom and was pretty happy. It's not a big job, but you do have to drill new holes for the switch clusters.
Or remove the tab
which is what I did because I wanted to change the angle of the cluster.
There's nothing to it, really. Just need to either drill 2 holes in the handlebar, OR shave off the little studs on the controls.
Here's another thread you can read:
http://ducatimonsterworldwide.org/index.php?topic=2431.0
I did it, was happy, just went to clipon's though...
Was gonna do that but I decided to go with clipons. I am very happy with my apex-clipons [thumbsup]