hello all,
purchased my clip-ons a few years ago from a local rider. never knew the brand (no markings). yesterday i dropped the bike in a parking lot (thought the kickstand was down [bang]) and bent the left side clip-on bar and need to replace it but do not know where to go. as you can see in the pictures it has a notch drilled out for one of the bolts to secure in place.
any help would be greatly appreciated!
(http://i280.photobucket.com/albums/kk168/jimmygomk3/photo1.jpg)
(http://i280.photobucket.com/albums/kk168/jimmygomk3/photo2.jpg)
thanks
jeff
bump, anyone?
looks like any bar will work just drill a hole for the bolt to hold it in place.
Quote from: He Man on July 20, 2009, 10:29:12 AM
looks like any bar will work just drill a hole for the bolt to hold it in place.
yup, All clip ons have basically the same standard bars, the only difference is on the actual clamp. I believe that any 7/8 bar will do. I believe that monsterparts carries spares IIRC.
thanks guys, i appreciate the info. I will call jeff @ monsterparts and see what he has.