|
Title: need dimensions of racing stripe and lettering on your S4 or S2 tanks Post by: snowmanZ on July 24, 2009, 06:01:18 AM Those who have a ducati racing stripe, I need to know the exact dimensions of them. The larger one, the width and length if you could please. The smaller lines, just the width please. Also I need the dimensions of the lettering on your tank, the width and length.
I am getting my bike custom vinyled and I need to know by this afternoon. Thanks Title: Re: need dimensions of racing stripe and lettering on your S4 or S2 tanks Post by: cyrus buelton on July 24, 2009, 06:20:02 AM I could have it to you by 130p
My bike is out in the lot, but I dont have anything to give you a proper measurement Title: Re: need dimensions of racing stripe and lettering on your S4 or S2 tanks Post by: stopintime on July 24, 2009, 06:51:12 AM The offset stripes on S2R is not fixed width - different widths as it goes along, with a built in curve/swoosh.
http://cgi.ebay.co.uk/Ducati-Corse-Stripe-kit-Sportclassic-Hypermotard_W0QQitemZ130241296233QQcmdZViewItemQQptZUK_Motorcycle_Parts?hash=item1e52fc7769&_trksid=p4634.c0.m14.l1262&_trkparms=%7C293%3A2%7C294%3A30 (http://cgi.ebay.co.uk/Ducati-Corse-Stripe-kit-Sportclassic-Hypermotard_W0QQitemZ130241296233QQcmdZViewItemQQptZUK_Motorcycle_Parts?hash=item1e52fc7769&_trksid=p4634.c0.m14.l1262&_trkparms=%7C293%3A2%7C294%3A30) If this is what you're after (not sure if it's for the S4R tank) - it's 66mm - the mid stripe. Title: Re: need dimensions of racing stripe and lettering on your S4 or S2 tanks Post by: snowmanZ on July 24, 2009, 06:59:50 AM The offset stripes on S2R is not fixed width - different widths as it goes along, with a built in curve/swoosh. http://cgi.ebay.co.uk/Ducati-Corse-Stripe-kit-Sportclassic-Hypermotard_W0QQitemZ130241296233QQcmdZViewItemQQptZUK_Motorcycle_Parts?hash=item1e52fc7769&_trksid=p4634.c0.m14.l1262&_trkparms=%7C293%3A2%7C294%3A30 (http://cgi.ebay.co.uk/Ducati-Corse-Stripe-kit-Sportclassic-Hypermotard_W0QQitemZ130241296233QQcmdZViewItemQQptZUK_Motorcycle_Parts?hash=item1e52fc7769&_trksid=p4634.c0.m14.l1262&_trkparms=%7C293%3A2%7C294%3A30) If this is what you're after (not sure if it's for the S4R tank) - it's 66mm - the mid stripe. Pretty close, This is just going to be for the tank and seat. Mostly what I see is stripes going down the center. We were thinking about the ones that go off at an angle. I measured from the gas cap and got 4 1/4 inches. So I want to see another dimension other than that. My main concern is the lettering for Ducati. I need this more than anything. Right now, I have a rough estimate of seven inches. I got a belly pan for my monster, and I want "Monster" lettering on that, it is going to be six inches, I think. Title: Re: need dimensions of racing stripe and lettering on your S4 or S2 tanks Post by: stopintime on July 24, 2009, 11:54:23 AM My Monster tank decal is 26 x 145 mm (145 measured from bottom left to bottom right)
Did you get your answer regarding the stripes? |