Ducati Monster Forum

Moto Board => General Monster Forum => Topic started by: raulduke on August 11, 2009, 09:58:52 AM

Title: Buying a 996...what should I know/look for?
Post by: raulduke on August 11, 2009, 09:58:52 AM
So rather than dumping even more $$$ in my monster which is already so custom I will never be able to sell her for what she is worth, I think I am going to buy yet another bike.  It seems like I can get a 996 fairly easily in the $5500-$7200 range.

What should I know about buying/owning one?
Title: Re: Buying a 996...what should I know/look for?
Post by: DucHead on August 11, 2009, 10:29:00 AM
Flaking rocker arms.
Title: Re: Buying a 996...what should I know/look for?
Post by: Raux on August 11, 2009, 10:41:34 AM
that's a good point...
what motors have the flaking rocker problems?
is it all the 4-valvers?
Title: Re: Buying a 996...what should I know/look for?
Post by: Desmo Demon on August 11, 2009, 10:44:30 AM
Basically every Desmoquattro after 1995 is prone to the dreaded flakes....


For everything you every wanted to know about buying a used Ducati Superbike (compliments of Shazaam)....

http://www.ducati.ms/forums/showthread.php?t=26729 (http://www.ducati.ms/forums/showthread.php?t=26729)
Title: Re: Buying a 996...what should I know/look for?
Post by: Monsterlover on August 11, 2009, 11:31:25 AM
If you get a 998 you won't have the rocker issue. . .

and they look just like a 996 ;D
Title: Re: Buying a 996...what should I know/look for?
Post by: raulduke on August 11, 2009, 12:59:17 PM
I would prefer a 998 but haven't seen any in my $6-8k price range.

C.
Title: Re: Buying a 996...what should I know/look for?
Post by: Monsterlover on August 11, 2009, 01:15:56 PM
Ahh.

If you can find a 996 that's been taken care of you might consider that.

Price the rocker arms before you buy.

link (http://cgi.ebay.com/ebaymotors/2002-DUCATI-998-SUPERBIKE-BIPOSTO-RED_W0QQitemZ220464024183QQcmdZViewItemQQptZUS_motorcycles?hash=item3354ae0a77&_trksid=p4506.c0.m245)

link (http://cgi.ebay.com/ebaymotors/2004-Ducati-998_W0QQitemZ250481101480QQcmdZViewItemQQptZUS_motorcycles?hash=item3a51d64aa8&_trksid=p4506.c0.m245)
Title: Re: Buying a 996...what should I know/look for?
Post by: swampduc on August 11, 2009, 04:08:15 PM
Hopefully, the rockers have been changed by now.
Also, used parts (but prob not rockers) are readily available on ducati.ms
I've been accumulating a few spares for my 996 there.
Title: Re: Buying a 996...what should I know/look for?
Post by: lawbreaker on August 11, 2009, 07:29:33 PM
charging system.....
radiator overflow tank...( the one behind the triples by the headstock)- prone to crack and leak..

I think the rear stub axle...

those are possible issues to check off the top of my head...


Ask  Neufunsix if he's still here
Title: Re: Buying a 996...what should I know/look for?
Post by: ducpainter on August 11, 2009, 07:50:55 PM
Quote from: lawbreaker on August 11, 2009, 07:29:33 PM
charging system.....
radiator overflow tank...( the one behind the triples by the headstock)- prone to crack and leak..

I think the rear stub axle...

those are possible issues to check off the top of my head...


Ask  Neufunsix if he's still here
Pretty sure the stub axle was a recall item.

It should have been fixed by now.