Hi ,
I was wondering if the Arrow system of a M900 (1993) would fit my M600 Dark (2001) ?
http://img269.imageshack.us/gal.php?g=img1775y.jpg (http://img269.imageshack.us/gal.php?g=img1775y.jpg)
Quote from: Bartjes on August 14, 2009, 12:37:22 AM
Hi ,
I was wondering if the Arrow system of a M900 (1993) would fit my M600 Dark (2001) ?
http://img269.imageshack.us/gal.php?g=img1775y.jpg (http://img269.imageshack.us/gal.php?g=img1775y.jpg)
The cans will fit, but the pipes are longer on a 900 due to the cylinders being taller. It might be tough to get them in there as is.
It does look like you might be able to shorten the headers due to the multi piece construction.
Are you willing to do some cutting?
Not really into all the cutting...
But i can just slip on the cans to my original tubes?
i have a low mount original though :-\
Should be able to use the slip ons and s pipes. You won't have the spring connection between the s pipe and your stock header that you see in the photos - unless you tacked something to the stockers. The lack of a spring *might* make for a leak - but probably not. There's been plenty of slip-one sets for use with the stock headers than didn't use any sort of spring to snug the connection between the headers and s pipes.
Some important things to remember is that if you have not removed/repositioned the charcoal emissions canister behind your right passenger peg - it's got to go to use high moutns. Also, that set up should come with a set of spacers and shoulder bolts that replace the stock rear set mounting shoulder bolts to give you enough room to run the s pipes inside the rearset