I removed the emission control canister today along with the plastic cover on the left side and the center screen. I want to remove the plastic cover on right side but there is a finned aluminum device (voltage rectifier?) with lots of wires that attach to the plastic cover. Any good thoughts on where to relocate and attached this device?
It is a beautiful engine and the lower cylinder would look so much better fully exposed.
I bolted it where the horn was mounted (I used a few washers as a spacer). I then bolted the horn somewhere elseâ€"shared a mount with something else nearby IIRC.
Really the best free mod you can do. [thumbsup]
yeah people have pretty much used the horn mount. a search for the 696 modification thread will show some ideas.