Text only | Text with Images

Ducati Monster Forum

Moto Board => Accessories & Mods => Topic started by: Superlight.si on September 11, 2009, 09:55:03 AM

Title: M900 fitting termi's? instructions - how do they go on?
Post by: Superlight.si on September 11, 2009, 09:55:03 AM
Hi Peeps,

I am trying to fit a complete Termi system.

I don't have the fitting instructions.

Pipe work goes together great, I just don't know how or where the 2 mounting brackets go to hold the highlevel cans in place?

Some body out there must have fitted these before.

They are for a carbed M900.

Any clues would be gratefully received.

Many thanks
Si
Title: Re: M900 fitting termi's? instructions - how do they go on?
Post by: Superlight.si on September 16, 2009, 07:16:53 AM
For anyone interested - apparently I am missing a 'horse shoe' type bracket from under the seat.
Title: Re: M900 fitting termi's? instructions - how do they go on?
Post by: mattyg on September 22, 2009, 09:08:57 AM
Where did you get your full Termi setup from? I am thinking of going that route on my M900. Do you have to reflash the ECU?
Title: Re: M900 fitting termi's? instructions - how do they go on?
Post by: stopintime on September 22, 2009, 11:49:49 AM
I don't know exactly what you're needing, but is it his part?

http://www.monsterparts.com/pc/ZU-C444/Bodywork-Carbon/ZU-C444.html (http://www.monsterparts.com/pc/ZU-C444/Bodywork-Carbon/ZU-C444.html)
Title: Re: M900 fitting termi's? instructions - how do they go on?
Post by: grandpa nate on October 12, 2009, 10:23:00 PM
I have a 99 900 that i am goin to be using for the track soon.  I only have the slip ons but from what it sounds like you need info for the brackets at the back.  I will send pics in the morrow if you still need em.  It is fairly straight forward.
Text only | Text with Images