Ducati Monster Forum

Local Clubs => DFWM => Topic started by: junior varsity on September 15, 2009, 01:39:06 PM



Title: WTB 900 SS (or SP/CR/FE/SL etc)
Post by: junior varsity on September 15, 2009, 01:39:06 PM
Hey guys,

I'm looking to invest in a 2V 900 Ducati to take to the track. Since it will be my first track bike, I'm not looking to pay a lot for a showroom-pristine beauty. I plan on doing some motor and brake work and most importantly: me-work.

If you, or somebody you know, is looking to part ways with a 92-02 900 Supersport of any variation, please let me know. I'm not ruling out a bike that has some crash damage, even if its more than just bodywork damage. (But I need a straight frame and no damage to the motor). Cosmetics aren't really that much of a concern.

Let me know if anything comes up!  [thumbsup]


Title: Re: WTB 900 SS (or SP/CR/FE/SL etc)
Post by: fastwin on September 16, 2009, 06:52:29 AM
No specific help here but I know McKraut had a 900SS for a while then sold it to a13bpilot who completely rebuilt it into a track day only sled. Not sure of the year model. Also, Samsonite currently owns a 900SS and uses it for track days. Again, not sure of the year. PM any of those guys for info, tips, warnings, suggestions, etc...


Title: Re: WTB 900 SS (or SP/CR/FE/SL etc)
Post by: Samsonite on September 16, 2009, 07:16:15 AM
You mean something like this??
2002 Ducati 900 Sport
Ohlins rear
996SPS front forks (top of the line Showa's)
Custom Ohlins damper
Brake Tech Rotors
Galfer brake lines
Upgraded Brembo calipers
Brembo GP levers
Brembo Master Cyl....Nice!
LSL Clip ons
quick release billet race fuel cap
Termi Carbon Exhaust
Aftermarket Slave cyl.
Race Tail and 2nd Carbon Fiber race tail I just bought
Speedy Moto Triple Clamp
Speedy Moto Underbody frame sliders
Speedy Moto fork sliders
Michelin Pilot Power 2ct's with only 4 trackdays on them
Bike had 6K service done by Stuart Rust this summer

I paid $4500 for it, and I have well over $5k in it, I'll sell for $4500.00

(http://pic40.picturetrail.com/VOL363/7371556/21738905/373398129.jpg)
(http://pic40.picturetrail.com/VOL363/7371556/21738905/373398131.jpg)
(http://pic40.picturetrail.com/VOL363/7371556/21738905/358514710.jpg)
(http://pic40.picturetrail.com/VOL363/7371556/21873915/361128828.jpg)
(http://pic40.picturetrail.com/VOL363/7371556/21873915/361128833.jpg)
(http://pic40.picturetrail.com/VOL363/7371556/21873915/371119228.jpg)
(http://pic40.picturetrail.com/VOL363/7371556/22495964/373663590.jpg)

Last weekend at Texas World Speedway

TWS 9 7 2009 LQ (http://www.youtube.com/watch?v=tnv9V6rkpB8#normal)


Title: Re: WTB 900 SS (or SP/CR/FE/SL etc)
Post by: Samsonite on September 16, 2009, 07:20:43 AM
It will be at ECR this Sunday if you are interested in seeing it [thumbsup]


Title: Re: WTB 900 SS (or SP/CR/FE/SL etc)
Post by: fastwin on September 16, 2009, 07:46:12 AM
Not to get in the way of Tommy's sales efforts but Eurosport Cycles in Ft. Worth has a 1998 900SS with 11,280 on the clock for $3,695. Although Tommy's bike is already set up for what you want and for a good price. [thumbsup]  And if Stuart Rust laid his healing hands on it you know it is well tuned and sorted. And you know it's recent history... hard to beat.


Title: Re: WTB 900 SS (or SP/CR/FE/SL etc)
Post by: Samsonite on September 16, 2009, 07:52:45 AM
I just left Eurosport about an hour ago, dropped of the Triumph for service.  The '98 they they have there is nice, It was a half fairing one (I think they're the CR model?)  It was a good deal.  I always wanted to convert an older style to a Supermono....

Here's a company that sells the bodywork to do so...

http://www.airtech-streamlining.com/ducati/SUPERTWIN1991-97.htm (http://www.airtech-streamlining.com/ducati/SUPERTWIN1991-97.htm)

(http://www.airtech-streamlining.com/images/SUPERTWIN_1.jpg)


Title: Re: WTB 900 SS (or SP/CR/FE/SL etc)
Post by: junior varsity on September 16, 2009, 08:52:00 AM
Yeah, the CR is the half-faired model. Drool.


Tommy, we need to talk dollars and scents. You heard that right, scents. I'm looking to do some motor work eventually to the bike I end up with, I've got a set of race cams / adj. pulleys & valves for a 900 and at this time, I don't have a 900 to put it in. You might say "Hey you idiot, what about your 900?!" - I know, I have a set of torque grind cams and corresponding valves for it, already have the adj. pulleys on it.

So short story is, I have parts for a bike that I do not yet own.


Title: Re: WTB 900 SS (or SP/CR/FE/SL etc)
Post by: hiero on September 16, 2009, 09:09:35 AM
I didn't think the SS motors were the same as the monster 900's, can you use those parts properly on an SS?


Title: Re: WTB 900 SS (or SP/CR/FE/SL etc)
Post by: RED on September 16, 2009, 09:44:16 AM
Let me just attest to the awesomeness of T's bike. I've been on a couple a trackdays already with him and the machine is a true Gorilla bike. The F*n torque is unbelievable. Unbeknowst to T I took this baby for a short stroll down the block while off loading from the trailer so I could 'turn it around' and head it into the garage. This bike maybe short on the top end but enough top end to make you say uncle or if you're looking for kick you in the seat of the pants driving on a finely tuned bike with lots of upgrades this is the bike you want. I just wish I had a video of T opening up that beast onto the straight at TWS las week. OMG it stole the show! It was thunder! With some valve work this bike will beat up most SBKs on the track. JMTC


Title: Re: WTB 900 SS (or SP/CR/FE/SL etc)
Post by: Samsonite on September 16, 2009, 09:55:48 AM
You rode my bike? >:(

jk [laugh]

soooo just never leave the keys to the trip 9 laying around.....


Title: Re: WTB 900 SS (or SP/CR/FE/SL etc)
Post by: junior varsity on September 16, 2009, 10:51:07 AM
The SS and M motors for the 900 are the same in SOME instances. 97-98 M900 motors got stuck with really crappy valves/cams. The other change, which is through the board, is the transition from 2p small alternators to the larger 3p (note the change in alternator side case from the little 'boob' sticking out, to the big 'pec' if you will. i just went there.)

The I.E. bikes got livelier cams than the Carb'd (hence my wanting to get something zippier for my M900), and the ST2 has the liveliest from the factory (its what Chris Kelley and Guy Martin put in their Testarossa Motors). The VeeTwo -210 grind is the same as the DP part back in the day (06090 - 964034AAA)

Valve size wise, the 43/38 intake exhaust I believe is the same. Likewise, the set of cams I have are for 900SS/M. They may even work in 750's, but I haven't bothered to take note of that info as it has passed by.

http://www.bikeboy.org/duccamspec.html (http://www.bikeboy.org/duccamspec.html)

I have 210's for my future trackbike, they have gobs of top end. I'm looking to have, eventually, testarossa heads via MBP done. I know big ambitions.

I have 210's for my Monster, which will eventually get put in.


Title: Re: WTB 900 SS (or SP/CR/FE/SL etc)
Post by: RED on September 16, 2009, 11:52:31 AM
You rode my bike? >:(

jk [laugh]

soooo just never leave the keys to the trip 9 laying around.....

Technically speaking, ..........yes.  ;D

Here is what I thought about earlier today T...If you want to ride the trip 9, do my level and ride the trip 9 when I'm up all we do is switch suits and they'll never know! I'll ride level 2 too!  8)


Title: Re: WTB 900 SS (or SP/CR/FE/SL etc)
Post by: junior varsity on September 16, 2009, 11:54:55 AM
tommy, i will trade you red's niner for your SS, straight up. just go over to red's house and pick your new ride up.


Title: Re: WTB 900 SS (or SP/CR/FE/SL etc)
Post by: RED on September 16, 2009, 12:55:06 PM
Huh?...yeah, ok!  ;D uh, wait...I'm all twistificated up now...  ???


Title: Re: WTB 900 SS (or SP/CR/FE/SL etc)
Post by: junior varsity on September 16, 2009, 12:56:39 PM
don't worry, i'll make sure you are compensated in 'goodwill'.


Title: Re: WTB 900 SS (or SP/CR/FE/SL etc)
Post by: RED on September 16, 2009, 01:00:10 PM
huh huh...yeah what he said!  [thumbsup]


SimplePortal 2.1.1