Ducati Monster Forum

I'm wanting to add a couple of red LEDS to my Rizoma belt covers to light up the plexiglass area. Need a source on some that will fit, mold, bend in this area.

I don't think you have a lot of clearance in there correct? So you'd probably need some surface mounted LED's, not through holes. I don't know if this will work, but check it out:

http://www.dealextreme.com/details.dx/sku.10136 (http://www.dealextreme.com/details.dx/sku.10136)

This web site has a bunch of gadgets from Hong Kong.

http://www.customdynamics.com/ (http://www.customdynamics.com/) - poke around in there

That's what I was thinking. Thanks guys for the info.

+1

was just about to say the same... one of my coworkers tinkers on cruisers and that's where he gets all his stuff

sorry if this was in the others links as I dident check them but...

radioshack sells square LEDs that are about a mm thick and focus light out the top, you probably wouldent need more than 8 or 12 to light up the windows in the covers. the only problem would be in finding a spot to put the circuit so that it would run off the battery.

http://www.superbrightleds.com/led_prods.htm (http://www.superbrightleds.com/led_prods.htm)
http://ledaccentlights.net/store/ (http://ledaccentlights.net/store/)

I got some from Joe's this week to supplement my custom tail. I think he may even be willing to do custom work. Only downside is that they aren't the high intensity LEDs. If you're good with electronics, superbrightleds has the HI ones.

Good service here and some pretty cool stuff.  I'm working on putting some 3" mini light bars where my passenger pegs once were.  I'm hoping for a little more visibility in night city traffic and add some credability to the empty brackets.

www.radiantz.com (http://)

Post up in the tutorials section if you get this done, would be interested in seeing the results...

 [popcorn]