|
Title: Removing pass pegs from stock 696.... Post by: eastview on October 23, 2009, 12:57:34 PM I know there was a post where the stock asm was machined and coated black but I can't find the thread . I have a used set of peg mounts I want to machine off the extra to remove the passenger pegs. I put a XBox system and did a tail chop now the passenger pegs stick out like a sore thumb. Anyone?????
Title: Re: Removing pass pegs from stock 696.... Post by: danaid on October 23, 2009, 07:10:38 PM Search for member; hamsandwich. He has done this mod but I can't remember the thread right now, and if you PM him I'm sure he'll help.
Title: Re: Removing pass pegs from stock 696.... Post by: eastview on October 26, 2009, 08:37:35 AM Thanks, sent him a PM waiting to hear back. Hope to have this done by GF B'day.
Title: Re: Removing pass pegs from stock 696.... Post by: d6a9p6 on November 21, 2009, 04:05:53 PM jeez ,,,get out the hacksaw and lop em off. file down the offending knobs, sand and let the salt air kill the shine,,,go riding. Don
Title: Re: Removing pass pegs from stock 696.... Post by: dennisd on November 21, 2009, 05:25:35 PM What I thought about doing is finding some sliders on which I could modify the mounting point then place in the passenger peg mounts. This would help protect the Termis in case of a tip over. I don't want them to stick out very far however; thought about some axle sliders.
Title: Re: Removing pass pegs from stock 696.... Post by: Raux on November 22, 2009, 08:14:25 PM What I thought about doing is finding some sliders on which I could modify the mounting point then place in the passenger peg mounts. This would help protect the Termis in case of a tip over. I don't want them to stick out very far however; thought about some axle sliders. the mounts do bend in lowsides (ask me how i know) so not sure slides on them would help. Title: Re: Removing pass pegs from stock 696.... Post by: RC Fan on November 23, 2009, 01:25:07 AM the mounts do bend in lowsides (ask me how i know) so not sure slides on them would help. In the event of a tip-over though, a set of sliders there might work well. I have thought about it on both bikes. Title: Re: Removing pass pegs from stock 696.... Post by: dennisd on November 23, 2009, 05:54:53 AM the mounts do bend in lowsides (ask me how i know) so not sure slides on them would help. Ahh, come on, tell us how you know.... [wine] Title: Re: Removing pass pegs from stock 696.... Post by: Raux on November 23, 2009, 08:28:02 AM Ahh, come on, tell us how you know.... [wine] http://ducatimonsterforum.org/index.php?topic=27302.msg475726#msg475726 (http://ducatimonsterforum.org/index.php?topic=27302.msg475726#msg475726)Title: Re: Removing pass pegs from stock 696.... Post by: dennisd on November 23, 2009, 10:47:26 AM So THAT'S the reason for the custom rebuild?
Man, I gotta tell you; there are easier ways to get the wife to let you spend money on rebuilding your bike. Next time, don't go to such extremes. BTW, glad you walked away from that scene. Title: Re: Removing pass pegs from stock 696.... Post by: Raux on November 23, 2009, 11:48:49 AM So THAT'S the reason for the custom rebuild? thanks. i want to have it done in time for WDW2010Man, I gotta tell you; there are easier ways to get the wife to let you spend money on rebuilding your bike. Next time, don't go to such extremes. BTW, glad you walked away from that scene. |