Ducati Monster Forum

Moto Board => Tech => Topic started by: CMDRDAVE on November 20, 2009, 05:18:27 PM

Title: Bent Kick Stand ???
Post by: CMDRDAVE on November 20, 2009, 05:18:27 PM
How did I bend my kickstand?   [bang]

Seriously it looks like it would be difficult to do and I don't know how I did it.  It is bet forward a little and up.  Now it leans so far over than it makes me nervous.  I noticed last night at the gas station but it was dark.  Looked at it today and it was definitely bent.  It hasn't fallen over and no one has messed with it that I know of.  I did leave it on the street for about 4 hours last night, but no indications anything happened to it.

I was going to take it on a long trip over thanksgiving but I am not sure about that now.  I don't think it will bend any more, but I also didn't think it would bend in the first place.  I don't like the idea of bending it back and stressing the metal.

Anyone have an extra kickstand around that I can get by Tuesday?  Just kidding (kinda)
Title: Re: Bent Kick Stand ???
Post by: Speeddog on November 20, 2009, 08:40:35 PM
Are you sure the mounting bolts are tight?

Is this an aluminum stand/aluminum bracket or a steel/steel one?
Title: Re: Bent Kick Stand ???
Post by: darkduc7 on November 21, 2009, 03:47:17 AM
i have a black steel one i could overnight you, i cut off the little nub on it that helps you kick it down cause i was scraping it in corners. perfectly use-able and you can have it for the cost of the shipping plus ten bucks for my time/gas to the post office! [thumbsup]
Title: Re: Bent Kick Stand ???
Post by: CMDRDAVE on November 21, 2009, 06:00:41 AM
It is a steel/steel kickstand/bracket and the mounting bolt is tight.

I thought about it some more and I wonder if the car in front backed into my bike, hit the front tire but not hard enough to knock it over.  I still think it would be tough hit it hard enough to bend the kickstand and still keep the bike upright.

DarkDuc -Thanks, PM Sent.
Title: Re: Bent Kick Stand ???
Post by: erkishhorde on November 21, 2009, 06:23:33 AM
You don't do kickstand turns, do you?
Title: Re: Bent Kick Stand ???
Post by: Speeddog on November 21, 2009, 06:55:51 AM
Heat it up with a torch, bend it back, repaint.
Title: Re: Bent Kick Stand ???
Post by: junior varsity on November 21, 2009, 12:56:04 PM
i too have a black one steel one, a spare, never installed, looks perfect. lemme know if you want it.
Title: Re: Bent Kick Stand ???
Post by: CMDRDAVE on November 22, 2009, 08:23:23 PM
Quote from: erkishhorde on November 21, 2009, 06:23:33 AM
You don't do kickstand turns, do you?
Nope never tried one.

Quote from: ato memphis on November 21, 2009, 12:56:04 PM
i too have a black one steel one, a spare, never installed, looks perfect. lemme know if you want it.

Thanks for the offer.  DarkDuc already sent one my way.   [thumbsup] [thumbsup]