Print Page - Torque Setting for Frame slider nuts??

Title: Torque Setting for Frame slider nuts??
Post by: balerionbjj on May 28, 2008, 01:24:11 PM

Anyone know the what the torque setting for the 12MM nuts should be tightened to when adding frame sliders?

Thanks,

Caleb

Title: Re: Torque Setting for Frame slider nuts??
Post by: carlosbarrios on May 28, 2008, 02:12:17 PM

Either use the spec provided with the sliders (if any), or use the same as the engine bolt you removed:

http://ducatimonsterworldwide.org/index.php?topic=373.0

2V: Engine mounting bolts 40-45 Nm

4V: Nut for engine-frame bolt M12x1.5 60 * GREASE B

Title: Re: Torque Setting for Frame slider nuts??
Post by: balerionbjj on May 28, 2008, 03:16:27 PM

The frame slider website says 80Nm which seems crazy tight.

Title: Re: Torque Setting for Frame slider nuts??
Post by: somegirl on May 28, 2008, 08:50:19 PM

Quote from: balerionbjj on May 28, 2008, 03:16:27 PM
The frame slider website says 80Nm which seems crazy tight.

Are you sure that's not a "not to exceed" spec? I think that's what my frame slider instructions had.

Ducati Monster Forum

Moto Board => Accessories & Mods => Topic started by: balerionbjj on May 28, 2008, 01:24:11 PM