Text only | Text with Images

Ducati Monster Forum

Moto Board => Accessories & Mods => Topic started by: DucatiTorrey on January 22, 2010, 05:40:07 AM

Title: Suburban Machinery M4 Handlebar
Post by: DucatiTorrey on January 22, 2010, 05:40:07 AM
I was interested in the M3 handlebar (ala Mr. Please) but notices now they have an M4 handlebar
http://www.suburban-machinery.com/duchypmoto.html (http://www.suburban-machinery.com/duchypmoto.html)

anyone put one on a 696??? 1100???

thanks
Title: Re: Suburban Machinery M4 Handlebar
Post by: DucatiTorrey on January 22, 2010, 05:40:29 AM
sorry this is the link to the M4

http://www.suburban-machinery.com/DucatiM4.html (http://www.suburban-machinery.com/DucatiM4.html)
Title: Re: Suburban Machinery M4 Handlebar
Post by: DucatiTorrey on January 22, 2010, 08:06:07 AM
ok so after talking with them the M4 is only for the 1100 monster.
Title: Re: Suburban Machinery M4 Handlebar
Post by: Punx Clever on January 22, 2010, 01:16:59 PM
The one for the 7/8" monsters will work.

http://www.suburban-machinery.com/duchypmoto.html (http://www.suburban-machinery.com/duchypmoto.html)
Title: Re: Suburban Machinery M4 Handlebar
Post by: badgalbetty on January 22, 2010, 04:52:49 PM
as Sean Connery would say........shweet! [thumbsup]
Title: Re: Suburban Machinery M4 Handlebar
Post by: Privateer on January 23, 2010, 05:16:39 AM
i want to get one of these but I can't figure out which one works with my adjustable forks and coffin reservoirs...


Title: Re: Suburban Machinery M4 Handlebar
Post by: pjfa on January 23, 2010, 10:39:26 AM
Nice. Better than M3

M4 looks/is more narrow in the clamps area
(http://www.suburban-machinery.com/pict1962.jpg)

M3
(http://www.suburban-machinery.com/DUC696BAR4.jpg)

I think I will upgrade to M4  [thumbsup]
Only have to swith the risers...
$ 174.95 M4
$  63.50 shipping to Portugal
$    ?     1-1.8" risers
Title: Re: Suburban Machinery M4 Handlebar
Post by: Punx Clever on January 23, 2010, 11:24:16 AM
Shipping ot portugal! DAMN!
Title: Re: Suburban Machinery M4 Handlebar
Post by: Raux on January 23, 2010, 11:31:18 AM
find someone with a 1100 that switched to clipons!
Title: Re: Suburban Machinery M4 Handlebar
Post by: golgofett on January 24, 2010, 10:43:43 PM
How would these change riding position?  Lean more forward?  I am curious if they would relieve pressure on my wrists due to the angle.  Not too sure about the looks though. 
Title: Re: Suburban Machinery M4 Handlebar
Post by: Chucko9-696 on January 25, 2010, 06:29:22 AM
I have the M3 on my monster. To me they are more narrow than stock, and make me lean more foward . They feel more like clipons than handlebars. I like them.
Title: Re: Suburban Machinery M4 Handlebar
Post by: corey on January 25, 2010, 06:32:05 AM
i wonder if that M4 bar is my solution to clearing fork adjusters on the 748 forks i'm about to install, without going to full clip-ons....
Title: Re: Suburban Machinery M4 Handlebar
Post by: DucatiTorrey on January 25, 2010, 01:11:53 PM
i did talk to them, the m4 has a different diameter for the M1100

it will NOT work on the 696

them also said the M3 is needed since the 696 has couffin res's
Title: Re: Suburban Machinery M4 Handlebar
Post by: Raux on January 25, 2010, 08:33:06 PM
Quote from: ducatitorrey on January 25, 2010, 01:11:53 PM
i did talk to them, the m4 has a different diameter for the M1100

it will NOT work on the 696

them also said the M3 is needed since the 696 has couffin res's
you just need the 1100 risers, not a hard thing to change.
for the coffins you might need the spacer... or just upgrade
Text only | Text with Images