|
Title: Header wrap and powdercoating on a M696? Post by: loopsrider on January 23, 2010, 05:21:59 PM Hey all,
Just wondering if anyone out there has taken it upon themselves to apply header wrap on an M696. I've installed it on my KTM 505 SX-F and really dig the nostalgia/badass look of it. The stuff I use is a black wrap and a thick application of silicone paint that is made specifically for header wrap (see pic below) Also wondering if anyone has anodized or powdercoated their foot peg brackets on their M696. My bike is the matte black model and I'm thinking of either powdercoating the bracket matte black to match the sub frame or silver/grey to match the engine cases. Any suggestions or pics of your similar mods would be greatly appreciated [beer] (http://i229.photobucket.com/albums/ee175/loopsrider/DSCF2275.jpg) Title: Re: Header wrap and powdercoating on a M696? Post by: kopfjäger on January 23, 2010, 05:28:57 PM http://ducatimonsterforum.org/index.php?topic=19083.msg350067#msg350067 (http://ducatimonsterforum.org/index.php?topic=19083.msg350067#msg350067)
Title: Re: Header wrap and powdercoating on a M696? Post by: loopsrider on January 23, 2010, 05:52:56 PM http://ducatimonsterforum.org/index.php?topic=19083.msg350067#msg350067 (http://ducatimonsterforum.org/index.php?topic=19083.msg350067#msg350067) Much appreciated! [beer] I did a search but was unaware the rear section was called a "rearset" thanks again... Title: Re: Header wrap and powdercoating on a M696? Post by: ungeheuer on January 23, 2010, 06:51:35 PM You're right. Its not called a rear set. Although there are many who fail to recognise the distinction.
|