Ducati Monster Forum

Arrivals Today..

Accossato Billet Alloy Quick Release Fuel Caps normally $169 - Member Price $152.10 (register for pricing)

http://www.carbon-imports.com.au/product_info.php?products_id=71 (http://www.carbon-imports.com.au/product_info.php?products_id=71)

(http://www.carbon-imports.com.au/images/fuel%20caps.jpg)

____________________________________________________________________________

Special Monster Forum Price

SP Electronics Gear Indicator with Plug and Play Loom. $269.00ea + postage - 5 units only

(http://www.spelectronics.it/public/thumb/Display_CTM_002.JPG)

_______________________________________________________________________________________________________________

I am going to be ordering some Microtec M197's (Tuneable Replacement ECU) soon at a red hot price, will be a lot better price than we are currently getting.

... anyone interested, please PM me..

http://www.carbon-imports.com.au/product_info.php?products_id=52 (http://www.carbon-imports.com.au/product_info.php?products_id=52)

(http://www.carbon-imports.com.au/images/M197.bmp)
(http://www.carbon-imports.com.au/images/M197_en.jpg)

_______________________________________________________________________________

Also some Quat D Ex Boxes for single sided swingarm monsters..

http://www.carbon-imports.com.au/product_info.php?products_id=123 (http://www.carbon-imports.com.au/product_info.php?products_id=123)

(http://www.carbon-imports.com.au/images/ducati%20monster_02.jpg)

(http://i720.photobucket.com/albums/ww206/Michael2511/QuatD-Monster.jpg)

(http://i720.photobucket.com/albums/ww206/Michael2511/QuatD-Monster2-1.jpg)

Carbon for the M696/M1100's

http://www.carbon-imports.com.au/index.php?cPath=1_17_35 (http://www.carbon-imports.com.au/index.php?cPath=1_17_35)

Rear seat cover

(http://www.carbon-imports.com.au/images/MD-MN08-C57_1.jpg)

Rear Hugger

(http://www.carbon-imports.com.au/images/MD-MN08-C12_1.jpg)

Carbon Tank Cover

(http://www.carbon-imports.com.au/images/MD-MN08-C50_1.jpg)

Air Intake Covers

(http://www.carbon-imports.com.au/images/MD-MN08-C40_1.jpg)


Instrument Cover

(http://www.carbon-imports.com.au/images/MD-MN08-C91_1.jpg)

_________________________________________________________________


Some New arrivals today..


** Please note, if you register your details on the website and send me an email, i will give you "Valued Customer" status, which gives you member discounts when you add products to the shopping cart ****


Evotech RC Fuel Caps, Fuel Cap Bolt Kits, Bar Ends, Oil Filler Caps.. all high quality Anodized Billet Alloy products, made by the same people who make Bar Ends & Oil Caps for Ducati Performance.

Fuel caps can be mixed and matched with inner and outer colours.

http://www.carbon-imports.com.au/product_info.php?products_id=97 (http://www.carbon-imports.com.au/product_info.php?products_id=97)

(http://www.evotech-rc.it/images/tappi%20rosso%20misti.jpg)
(http://www.evotech-rc.it/images/tappi%20nero%20misti.jpg)
(http://www.evotech-rc.it/images/tappi%20oro%20misti.jpg)
(http://www.evotech-rc.it/images/tappi%20silver%20misti.jpg)

http://www.carbon-imports.com.au/product_info.php?products_id=138 (http://www.carbon-imports.com.au/product_info.php?products_id=138)

Oil Filler Caps

(http://www.evotech-rc.it/images/tappo%20olio%202%20moster.jpg)
(http://www.evotech-rc.it/images/oil-d1.jpg)
(http://www.evotech-rc.it/images/tappi%20oilo%20copy.jpg)

Tail Tidy's - M696//M1100

http://www.carbon-imports.com.au/product_info.php?products_id=100 (http://www.carbon-imports.com.au/product_info.php?products_id=100)

(http://www.evotech-rc.it/images/IMG_0%20042.jpg)
(http://www.evotech-rc.it/images/portatarga%20nuovo%20boom%20.jpg)

Fuel Cap Bolt Kits

http://www.carbon-imports.com.au/product_info.php?products_id=136 (http://www.carbon-imports.com.au/product_info.php?products_id=136)

(http://www.evotech-rc.it/images/viti%20serba%20696%201100%202.jpg)
(http://www.evotech-rc.it/images/VITI%20TAPPO%20NERA.jpg)

Bar Ends

http://www.carbon-imports.com.au/product_info.php?products_id=99 (http://www.carbon-imports.com.au/product_info.php?products_id=99)

(http://www.carbon-imports.com.au/images/FS-17U.jpg)

(http://www.evotech-rc.it/images/fs%20moster%20690%20cr.jpg)

isn't all this on the the "new sponsor (and likely running "stuff" updates) thread?

SPAMMER SPAMMER SPAMMER

lots of huge pics of nice gear but it's in the other thread, must we be bombarded with multiple threads with the same advertisements?

paul.

the title clearly states what is in here, I will use this thread to keep updating our products

so you deleted the pics from the other thread and will use this one to keep everyone updated on what you have to offer? that's a better way to do it, has your name as the thread starter. will you reply to specific requests for stuff here too?
paul.

yeah, better named thread, let the other 2 die and that this one can be the 'live' one.

I need a gear indicator that reads:

1: keep her down
2: when do we get to the good stuff?
3: are there cops around
4: oh mamma!
5: yippee
6: speed demon!

Quote from: loony888 on February 02, 2010, 09:47:56 PM
so you deleted the pics from the other thread and will use this one to keep everyone updated on what you have to offer? that's a better way to do it, has your name as the thread starter. will you reply to specific requests for stuff here too?
paul.

Hi Paul

Yes, if its what everyone wants? to ask questions here or PM me, whichever is easier, i don't mind.

Regards

Michael

Quote from: Spider on February 02, 2010, 10:07:45 PM
yeah, better named thread, let the other 2 die and that this one can be the 'live' one.

I need a gear indicator that reads:

1: keep her down
2: when do we get to the good stuff?
3: are there cops around
4: oh mamma!
5: yippee
6: speed demon!

Haven't found one yet Spider, but will keep looking for you!

I'll see what happens on the ECU front for me.
I am told mine is not an ECU problem but if it might solve my problem it could be the way to go.

(http://i720.photobucket.com/albums/ww206/Michael2511/QuatD-Monster.jpg)

I could nearly be persuaded to sell the S4R and get a silver M1100 and a QuatD  ;D

Blasphemy Dos.
But atm I could be persuaded to sell the S4Rs for one that's running.

Dos, you NEED 135hp for the 5km trip to work, the 2 valver wouldn't work. Don't even think it.

Quote from: DosVerde on February 03, 2010, 01:49:48 AM

I could nearly be persuaded to sell the S4R and get a silver M1100 and a QuatD  ;D

How about an 1100 with a HPE GP Style system?

http://www.carbon-imports.com.au/product_info.php?products_id=166 (http://www.carbon-imports.com.au/product_info.php?products_id=166)

(http://www.carbon-imports.com.au/images/DU_15AT_003a.jpg)

(http://i720.photobucket.com/albums/ww206/Michael2511/METALTECHracingcomponents2009_Page_.jpg)

Damn you  ;) you're really teasing me, as a fanatic old style Monster lover.

Exhaust looks fantastic [thumbsup] Db killers? Seems so.

Do you know which rearsets those are - and if they come with passenger pegs option?

Hi Stop, they are the MetalTech rearsets (guy who owns that 1100) .. he is making a number of variations and tells me in the next few months he will have them with passenger pegs, and to suit the S2R/S4R/S4RS monsters, HyperMotard, Multi etc ..

I am pretty sure there are DB killers as they are listed as Omologato and not race, which usually means db killers..

Quote from: ozducati on February 03, 2010, 12:37:51 PM
Hi Stop, they are the MetalTech rearsets (guy who owns that 1100) .. he is making a number of variations and tells me in the next few months he will have them with passenger pegs, and to suit the S2R/S4R/S4RS monsters, HyperMotard, Multi etc ..

I am pretty sure there are DB killers as they are listed as Omologato and not race, which usually means db killers..

Yeah, in Italy there's no way around "Omologato". Db-killers are actually visible in the picture. My question then is, can they be removed? No need to research - a new bike is not in my near future.

If you talk to the MetalTech guy, can you find out what kind of adjustability he's planning? I have my CycleCat rearsets about 40mm back and 10mm down compared to stock pegs. It would be nice to have options besides GillesTooling if I ever should need to replace mine. I'm also curious to know if he's adressing the possible binding issues that came up with the Gilles'.
http://ducatimonsterforum.org/index.php?topic=31180.msg540937#msg540937 (http://ducatimonsterforum.org/index.php?topic=31180.msg540937#msg540937)

I will ask about the DB killers, as am sure they would be removable, but nice to know anyway..

As for the Rearsets, the owner of Metaltech has them on his own bike, and is a very smart cookie when it comes to design and manufacturing, his main business is producing titanium hips and knee replacements .. i will check the adjustability with him, and take a photo of a set later...

Quote from: stopintime on February 03, 2010, 01:12:48 PM
Yeah, in Italy there's no way around "Omologato". Db-killers are actually visible in the picture. My question then is, can they be removed? No need to research - a new bike is not in my near future.

If you talk to the MetalTech guy, can you find out what kind of adjustability he's planning? I have my CycleCat rearsets about 40mm back and 10mm down compared to stock pegs. It would be nice to have options besides GillesTooling if I ever should need to replace mine. I'm also curious to know if he's adressing the possible binding issues that came up with the Gilles'.
http://ducatimonsterforum.org/index.php?topic=31180.msg540937#msg540937 (http://ducatimonsterforum.org/index.php?topic=31180.msg540937#msg540937)

Quote from: ozducati on February 03, 2010, 05:09:57 PM
his main business is producing titanium hips and knee replacements .. i will check the adjustability with him, and take a photo of a set later...

adjustable hip and knee replacements?? sorry just saw the funny side - my warped sense of humour!  ;D ;D ;D

Quote from: Mr.S2R on February 03, 2010, 05:29:15 PM
adjustable hip and knee replacements?? sorry just saw the funny side - my warped sense of humour!  ;D ;D ;D

i thought it was ironic when i found out, but i guess now he's making rearsets the hip and knees might become adjustable too... [laugh]

^^^ look out "so you think you can dance" ^^^^

A shipment of our Performance Technology Levers arrived today.. these are a folding Lever with Replaceable Blade & Tips, choice of colours..

DMF price $299 a pair (register for pricing)

http://www.carbon-imports.com.au/product_info.php?products_id=22 (http://www.carbon-imports.com.au/product_info.php?products_id=22)

(http://www.carbon-imports.com.au/images/Evo-II-Adjustable-Pair.jpg)

I see a point somewhere in the not too distant future where this thread is going to be the undoing of any last shred of fiscal restraint I have. Damn you bling junkies for getting me addicted.   [bang]

i tend to look at these products as being functional first, form second.. it's easier to justify that way..  ;D

An update from Metaltech last night with some new products, also a better image of the Monster rearsets, (currently 696/1100, soon to suit S2R/S4R/S4RS) and a mechanical drawing showing the adjustments etc and parts, which are all available as spares..

(http://i720.photobucket.com/albums/ww206/Michael2511/MetaltechMonsterrearsets.jpg)

(http://i720.photobucket.com/albums/ww206/Michael2511/MonsterRearsetsTechdrawing.jpg)

New Clutch Covers, and some wheel nuts!

(http://i720.photobucket.com/albums/ww206/Michael2511/MetaltechClutchCovers1.jpg)

(http://i720.photobucket.com/albums/ww206/Michael2511/MetalTechwheelnuts.jpg)

impressive stuff!  ;D be interested when they are ready for S2R! [thumbsup]

Rough measurement taken from the picture tells me that even if placed in the last/rear holes, the pegs will not be further back than the stock S*R pegs. If these are to offer the advantage of a rearward peg position, MetalTech needs to make a longer base plate. Unless of course the strength and beauty is enough by itself ;)

The drawing shows a part # 1. It's the vibration dampening rubber thing. It doesn't say "originale", but is it? Either way, to me it shows that the manufacturer is serious about funcionality [thumbsup]

Another idea - do you think he'd be interested in making kickstands - longer versions?

I will ask Metaltech to confirm the adjustments on the rearsets, and if he is interested in possibly making a kickstand..

Definataly interested for the s4r and price.How long till their ready ?

I am told late March they will be ready, not taking into account any delays they may have, but they are pretty good in terms of manufacturing and delivery.. price would most likely be the same as the 696/1100 rearsets, which is currently $649.00

Thanks for that.They look tough , no nonsence and simple.Is there a web site so i can get up dates ?I think im going to go them when ready !

Gino I'd say all your updates would be dome via Ozducati as he is their man for Aussie sales.

ok. i'll be waiting to have a good look

Quote from: gino on February 05, 2010, 12:38:49 PM
Thanks for that.They look tough , no nonsence and simple.Is there a web site so i can get up dates ?I think im going to go them when ready !

Hi Gino, as Matty mentioned, i will keep you posted on any updates.

Ok cool .Really hanging out for a rear set on  my s4r 05 . Maybe its going to take too long !Got any others in mind that are good that i should look at ?

I can get the HPE mid pipe, we can also source Quat D, Spark & Sil Moto exhausts (none of these have a mid pipe for the 1100), i've sent you a PM regarding price

Some new arrivals today - Evoluzione 28.5mm Clutch Slave Cylinders ..

Quotethese slave cylinder kits include features such as a ø28.5 mm bore (~20% reduction in lever effort), "x-ring" seals, a banjo bleeder bolt, clutch bleeder cup, ball bearing pushrod seat and our 10 year/unlimited mileage warranty against seal failure. available in black, clear , or gold

(http://www.evoluzione.net/photos/90041_42_43.jpg)

I also have some of these little bleeder kits in as well... (they are included with the Slave Cylinders, but also available separately.

(http://www.evoluzione.net/photos/50101.JPG)

How much are the bleeders ?

$12.50 + postage

Ok .Thanks .How do i pay for that ?

Gino, send me an email an your details (address etc) to sales@carbon-imports.com.au, will send you a paypal invoice.

oz ducati i need some gene therapy can you get a group buy for that  [laugh]

Gene's or Jeans  ;)

Quote from: bikeless on February 08, 2010, 10:40:27 PM
oz ducati i need some gene therapy can you get a group buy for that  [laugh]

depends which genes.. we are an ethical business ...if it's the impulsive buy gene, then we have those in stock  ;D

ok

Many people here have that gene.
I am not one of them, I am immune to all impulse purchases just look at my bike it's almost stock.

I have the tightarse impulse buy gene - damn you ebay (and the dmf parts for sale board!)  [thumbsup]

Quote from: mattyvas on February 09, 2010, 01:10:02 AM
Many people here have that gene.
I am not one of them, I am immune to all impulse purchases just look at my bike it's almost stock.

oh yeah?? did you see what's sitting on top of your bike at Dock's ???  ;D

Something more functional today. We are having these made, (Water Pump Protectors) will fit the S4R/S4RS Monsters, made of 3 layer Carbon/Kevlar.. also available in plain Carbon fibre if you want extra bling factor

(http://www.carbon-imports.com.au/images/MD-98R7-K72_1.JPG)

what the hell is that ?

sorry gino, is a water pump protector.. could be used for other things though i"m sure  ;D

I need one of those....protect me when the women-folk try the ole rip'n'grab

[thumbsup]

Quote from: ozducati on February 09, 2010, 01:14:03 PM
oh yeah?? did you see what's sitting on top of your bike at Dock's ???  ;D

But you see this was not an impulse buy, it was long planned.....
That's my excuse and I'm sticking to it.  ;D

Quote from: Spider on February 09, 2010, 08:36:34 PM
I need one of those....protect me when the women-folk try the ole rip'n'grab

[thumbsup]

I need one too, do they come in  size XL?

Quote from: brimo on February 10, 2010, 09:34:59 PM
I need one too, do they come in  size XL?

only XXL sorry  [laugh]

Anyone interested in these ? case covers for Wet Clutch bikes, with a replaceable slider.. in Black, Gold, Red, Silver colours..

Price will be around $160-$170

(http://farm3.static.flickr.com/2794/4175547268_15d189f2d6_o.jpg)
(http://farm3.static.flickr.com/2741/4175769464_70c735c6c6_o.jpg)
(http://farm3.static.flickr.com/2791/4175112325_ba72a03d7f_o.jpg)
(http://farm3.static.flickr.com/2503/4170342933_61ba1bd430_o.jpg)

(http://farm3.static.flickr.com/2602/4171103136_8736c23161_o.jpg)

Here's a good deal for anyone wanting to update their clutch a bit, or replace rusty clutch springs.. EVR Clutch Kit- comes complete with Stainless Springs / Anodized Retainers / Stainless Screws & Pressure Plate bearing complete - member price only $99.00 + postage.. register on the site and let me know so i can give you your member status for pricing before you buy..

http://www.carbon-imports.com.au/index.php?cPath=3_15 (http://www.carbon-imports.com.au/index.php?cPath=3_15)

(http://www.carbon-imports.com.au/images/EVR%20Springs%20Kit.jpg)

Clutch Covers also have special pricing - $199.00 less 10%


(http://www.carbon-imports.com.au/images/METAL%20TECH%20racing%20components%202009_Page_16_Image_0005.jpg)
(http://www.carbon-imports.com.au/images/clutch%20cover%20black-1.jpg)

Have a shipment of the Microtec ECU's on the way, please PM or email me for a special price..

(http://www.carbon-imports.com.au/images/M197_en.jpg)

It's looking likely.  :'( RIP DP ECU

Oz,
Could you see if Metaltech would consider making adjustable replacement brake and shifter pedals that can be mounted on the OEM rearset.  I've got MFW Vario Adjustable footpeg mounts which I am very happy with but am looking into possible options to replace the OEM pedals.  I have an '07 S2R800 btw.
Thanks

Hi, will ask the question, but i think as he is most likely making rearsets to suit these bikes soon, unless they are interchangeable he would need numbers to just make shifter/brake pedals.. but will ask anyway no worries

Quote from: Mojo S2R on February 23, 2010, 01:06:01 AM
Oz,
Could you see if Metaltech would consider making adjustable replacement brake and shifter pedals that can be mounted on the OEM rearset.  I've got MFW Vario Adjustable footpeg mounts which I am very happy with but am looking into possible options to replace the OEM pedals.  I have an '07 S2R800 btw.
Thanks

I saw on your website there were sprocket covers for the 696. do you have any pictures of them installed? i think they were evotech.

Quote from: DucatiTorrey on February 23, 2010, 05:23:31 AM
I saw on your website there were sprocket covers for the 696. do you have any pictures of them installed? i think they were evotech.

Hi Torrey, they are EVR .. a couple of pics, but not on a monster sorry..

(http://www.edovignaracing.com/images/stories/Prodotti/accessori/OB-sprocket.JPG)

(http://i720.photobucket.com/albums/ww206/Michael2511/IMG_2400-2.jpg)

just got another shipment of these in... Black, Red, Gold.. register on the site and send me a message for forum pricing on all products

http://www.carbon-imports.com.au/product_info.php?products_id=150 (http://www.carbon-imports.com.au/product_info.php?products_id=150)

(http://www.carbon-imports.com.au/images/redpiston.jpg)

is it true you guys aren't shipping internationally?

Quote from: ozducati on February 22, 2010, 10:48:18 PM
Have a shipment of the Microtec ECU's on the way, please PM or email me for a special price..

(http://www.carbon-imports.com.au/images/M197_en.jpg)

This shipment also arrived today, if you want the ultimate in tuning then the Microtec is the way to go... PM me for special pricing..

some nice new wheels coming soon.. made by OZ wheels in Italy.. they are the official supplier for the BMW WSBK Team


(http://i720.photobucket.com/albums/ww206/Michael2511/PROD_F_R_Black.jpg)

(http://i720.photobucket.com/albums/ww206/Michael2511/PROD_F_R_GOLD.jpg)


1. New MSicA alluminium alloy used with a special treatment in the alloy (DTI, double treatment inside), allows for an incredible reduction in inertia and weight vs. competitors. 35% Mass Reduction compared to OEM wheels, 15% Mass Reduction compared to leading aftermarket forged wheels. A weight savings of 2.5 - 3.5 lbs per set over the leading aftermarket wheels.

2. Strongest team of experienced engineers in designing wheels using special and exclusive FEM design simulation and calculation. This design group was part of one of the leading Italian magnesium and aluminum wheel builders for many years.

3. Wheels respect the most severe fatigue standards required by the market. All testing carried out in-house and to destruction to be absolutely sure of strength values.

4. Front wheels for the most popular top race bike applications don't have a screw and disk carrier but monolithic hub.

5. All wheels are equipped with special oil seals to protect and increase the life of bearings and other accessories. Also sprocket carrier is constructed with a special design avoiding any dust entering into the hub for better utilization and longer life of all components inside.

6. Wheels are supplied in black and gold anodized colors. Special orders for double finishing color or with polish or alluminium finishing are available.

7. All wheel accessories are constructed out of the highest possible quality materials ( Ergal 7075) and have a black anodized finish.

8. Sprocket carrier is designed by FEM analysis to obtain weight savings. Special sprocket is required and available through Motowheels for all double sided swingarm bikes (Single sided swingarm bikes do not need a sprocket).

9. A special cush system (AST - anti shock technology) is utilized inside the sprocket carrier system for double sided swingarm bikes. Through the use of special components and it's materials working at a high temperature, the result is better final drive operation which leads to increased life of chain & sprocket.

10. Damper rubber is constructed out of a special propritary compound in a cylinder shape, the same material developed for MotoGP, AMA, and SBK.

11. Extremely competitive price point especially considering that this product incorporates the latest technology in every component, the most innovative Al alloy & treatment, and all the experience of the last 15 years colaborating with the world's top MotoGP & SBK Championship Teams.

how much for a pair of the OZ Wheels for an 03 S4R please?


paul.

Quote from: loony888 on March 19, 2010, 01:10:11 PM
how much for a pair of the OZ Wheels for an 03 S4R please?


paul.

Hi Paul, PM sent.

got it, cheers michael. [thumbsup]

paul.

Just got a few of these in.. pug and play for later model Duc's with a laptimer...

http://www.carbon-imports.com.au/product_info.php?products_id=178 (http://www.carbon-imports.com.au/product_info.php?products_id=178)

(http://www.carbon-imports.com.au/images/DUCATIME%20GPS.png)

Special kit with GPS management, works with the original instrumentation DUCATI, perfectly compatible. Allows you to store the finish line GPS and all the data will be displayed on the original dashboard, simply connect the GPS module into original connector present behind original dash.
Will be possible to control the lap time, best lap, max speed reached, all data downloaded with original USB DUCATI pen drive, via the connector present behind the motorcycle seat.

The kit is composed, mouse GPS antenna and module for store the finish line, equipped with original Ducati connector as plug and play.

Ducati motorcycles compatible with the GPT system:

HYPERMOTARD
STREETFIGHTER
1198
1098
848
999
749
MONSTER 696
MONSTER 1100

Got a couple of sets of Frame & Axle sliders in yesterday from Speedymoto, stock is very hard to get at the moment..

http://www.carbon-imports.com.au/product_info.php?products_id=167 (http://www.carbon-imports.com.au/product_info.php?products_id=167)

(http://www.carbon-imports.com.au/images/new09-0205UNBW.jpg)

http://www.carbon-imports.com.au/product_info.php?products_id=168 (http://www.carbon-imports.com.au/product_info.php?products_id=168)


(http://www.carbon-imports.com.au/images/10-0201-2.jpg)

Gino fully recomends this .Saved my bike 'totally' !!!!!

nah just used my leg instead [roll] ;D

Nice

Just received another EVR Shipment.. nice products, well made and very good quality.. Ventilated pressure plates,  SS Spring & Retainer kits with screws and bearings, Clutch Covers..

http://www.carbon-imports.com.au/product_info.php?products_id=90 (http://www.carbon-imports.com.au/product_info.php?products_id=90)

(http://www.carbon-imports.com.au/images/vented%20pressure%20plate3.jpg)

http://www.carbon-imports.com.au/product_info.php?products_id=51 (http://www.carbon-imports.com.au/product_info.php?products_id=51)

(http://www.carbon-imports.com.au/images/EVR%20Springs%20Kit.jpg)

http://www.carbon-imports.com.au/product_info.php?products_id=88 (http://www.carbon-imports.com.au/product_info.php?products_id=88)

(http://www.carbon-imports.com.au/images/full%20clutch%20cover.jpg)

http://www.carbon-imports.com.au/product_info.php?products_id=89 (http://www.carbon-imports.com.au/product_info.php?products_id=89)

(http://www.carbon-imports.com.au/images/EVR%20Half%20Clutch%20Cover%20Black.jpg)

a new release product from one of our suppliers... colours can be mixed or matched, from the lid to the main body or bracket..  will be ordering some in soon...


(http://www.evotech-rc.it/images/serbatoio%20l%20frizione.jpg)

OK Michael, how much for a set?
Btw, can you get your hands on asv levers?

Quote from: goldFiSh on April 07, 2010, 03:04:48 AM
OK Michael, how much for a set?
Btw, can you get your hands on asv levers?

At the moment they are just about to release the smaller one, which is suitable for rear brake & clutch.. price will be around $79.00 in any colour combo. I don't deal with ASV sorry..

gee they look the goods.

pity I didn't see these before I bought my Rizomas

Quote from: ozducati on April 07, 2010, 02:17:00 PM
At the moment they are just about to release the smaller one, which is suitable for rear brake & clutch.. price will be around $79.00 in any colour combo. I don't deal with ASV sorry..

Thanks, I'll PM you once I've procrastinated some...

I've ordered a few of these in to have a look and check the quality... although all the other Evotech RC products i have in are A1..will put them up on the website once that's done..

Quote from: ozducati on April 06, 2010, 10:49:55 PM
a new release product from one of our suppliers... colours can be mixed or matched, from the lid to the main body or bracket..  will be ordering some in soon...


(http://www.evotech-rc.it/images/serbatoio%20l%20frizione.jpg)

Have some new Indoor bike covers on the way, made by the same people that make them for DP & other manufacturers... nicely made, non scratch...

http://www.carbon-imports.com.au/index.php?cPath=83_101 (http://www.carbon-imports.com.au/index.php?cPath=83_101)

(http://www.carbon-imports.com.au/images/141-2.jpg)

(http://www.carbon-imports.com.au/images/40.gif)

Now have these in stock, very nicely made... for your rear brake or clutch reservoir.. the front brake one is coming soon..

http://www.carbon-imports.com.au/product_info.php?products_id=237 (http://www.carbon-imports.com.au/product_info.php?products_id=237)

Quote from: ozducati on April 13, 2010, 11:16:03 PM
I've ordered a few of these in to have a look and check the quality... although all the other Evotech RC products i have in are A1..will put them up on the website once that's done..

(http://www.evotech-rc.it/images/serbatoio%20l%20frizione.jpg)

Metaltech Monster 696/1100 Adjustable Rearsets on special!!

http://www.carbon-imports.com.au/product_info.php?products_id=119 (http://www.carbon-imports.com.au/product_info.php?products_id=119)

(http://www.carbon-imports.com.au/images/Metaltech%20Monster%20rearsets.jpg)

(http://www.carbon-imports.com.au/images/METAL%20TECH%20racing%20components%202009_Page_19_Image_0004.jpg)

For all of you who love like to look after your pride & joy, we have just landed some nice soft indoor bike covers, made by the offical suppliers to:Ducati, MV Agusta, Tryumph Motorcycle, Honda Europe, Yamaha Europe. Register and email me for your special price.

(http://www.carbon-imports.com.au/images/141-2.jpg)

http://www.carbon-imports.com.au/product_info.php?products_id=223 (http://www.carbon-imports.com.au/product_info.php?products_id=223)

Just received a shipment of Quick Release fuel caps in... and some nice blingy clutch parts from EVR...

http://www.carbon-imports.com.au/index.php?cPath=3 (http://www.carbon-imports.com.au/index.php?cPath=3)

(http://www.carbon-imports.com.au/images/vented%20pressure%20plate3.jpg)


http://www.carbon-imports.com.au/product_info.php?products_id=71 (http://www.carbon-imports.com.au/product_info.php?products_id=71)

(http://www.carbon-imports.com.au/images/fuel%20caps.jpg)

Keep up the great work teasing Michael, those rearsets look so sweet, do you or can you still get stuff like that for older Monsters (97) so I to can procrastinate.





                             Mmick

Hey Mmick, can try and find specific stuff for you if you want? let me know what you are after and i will do my best.. the Metaltech guys tell me they will start doing rearsets for some of the earlier models, but who knows if it will happen or which models....

Hi mate, can you get these carbon fibre radiator guards for the S4  ??

(http://i20.ebayimg.com/04/i/000/f0/f6/3288_1.JPG)

Hi Polly

Sorry, can only find this one amongst my suppliers.. do you know the manufacturer??

(http://www.carbonvani.com/images/catalogo-prodotti/DMS..02.jpg)

Quote from: polly on May 26, 2010, 09:15:30 PM
Hi mate, can you get these carbon fibre radiator guards for the S4  ??

(http://i20.ebayimg.com/04/i/000/f0/f6/3288_1.JPG)

they look like ducati performance ones.
can you pm me a price on the indoor covers please? i'd like a blue one if you have one?

cheers,
paul.

Quote from: loony888 on May 27, 2010, 12:35:14 AM
they look like ducati performance ones.
can you pm me a price on the indoor covers please? i'd like a blue one if you have one?

cheers,
paul.

PM sent Paul

Colours Available - Red - Black/Gray - Red/Grey 

got a manufacturer in China...  http://www.alibaba.com/product-gs/278690449/Carbon_fiber_radiator_covers_for_Ducati.html (http://www.alibaba.com/product-gs/278690449/Carbon_fiber_radiator_covers_for_Ducati.html)

for this one
(http://i20.ebayimg.com/04/i/000/f0/f6/3288_1.JPG)

Quote from: ozducati on May 26, 2010, 11:50:35 PM
Hi Polly

Sorry, can only find this one amongst my suppliers.. do you know the manufacturer??

(http://www.carbonvani.com/images/catalogo-prodotti/DMS..02.jpg)

I've never heard anything good about Carbon from China.

Quote from: polly on May 27, 2010, 09:46:23 PM
got a manufacturer in China...  http://www.alibaba.com/product-gs/278690449/Carbon_fiber_radiator_covers_for_Ducati.html (http://www.alibaba.com/product-gs/278690449/Carbon_fiber_radiator_covers_for_Ducati.html)

for this one
(http://i20.ebayimg.com/04/i/000/f0/f6/3288_1.JPG)

Thanks Polly, but won't touch anything out of china, haven't ever seen any quality CF coem from there..

Ah, G'day Oz. Found you over here too!

I'm going to have to do a list for the M696 that I'm taking racing in July. I'll call you, but in advance, I'll be needing a set of rearsets and the engine protection that's needed for racing. Probably similar stuff to what I bought from you for the 848???

Hey I like the aluminium case saver for the wet clutch models - will that pass scrutineering?

8)

hey Spot, welcome ... am sure the alloy case covers would be ok for racing as they protect the clutch area... might order some in and have a look ??
will have to see if the other case protectors will fit .. have carbon bits and rearsets etc ....

Hey OZ , got my bling oil plugs today. Ordered,- in my letter box  2 days later .
Thanks mate  [thumbsup].

Quote from: Dave on June 18, 2010, 02:27:43 AM
Hey OZ , got my bling oil plugs today. Ordered,- in my letter box  2 days later .
Thanks mate  [thumbsup].

Hey Dave, good to hear.. what's that saying ? this thread is useless without pics? :)

Here you go OZ , not real exciting , but hey they're shiney! and they dont bloody leak like the oem ones.


(http://i4.photobucket.com/albums/y125/muschee/IMG_4684.jpg)

(http://i4.photobucket.com/albums/y125/muschee/IMG_4682.jpg)

thanks Dave, very nice !! just like a DP one only half the price! :)

Quote from: Dave on June 25, 2010, 11:04:30 PM
Here you go OZ , not real exciting , but hey they're shiney! and they dont bloody leak like the oem ones.


(http://i4.photobucket.com/albums/y125/muschee/IMG_4684.jpg)

(http://i4.photobucket.com/albums/y125/muschee/IMG_4682.jpg)

Have a shipment of Oz Wheels on the way, to suit Single Sided Swingarms...awesome lightweight forged alloy rims..

http://www.carbon-imports.com.au/product_info.php?products_id=200 (http://www.carbon-imports.com.au/product_info.php?products_id=200)

(http://www.carbon-imports.com.au/images/FORGEDALUP.jpg)

(http://www.carbon-imports.com.au/images/PROD_piega_black_R.jpg)

Hmmmmmm nice wheels they'd look scweet on the S4Rs.

i have a set coming that will fit :D

Quote from: mattyvas on June 29, 2010, 07:55:08 PM
Hmmmmmm nice wheels they'd look scweet on the S4Rs.

Some Purdy new Rear Wheel Nuts arrived this week, suits all Single Sided Swingarms... don't forget to register and let me know so you get your discount...

http://www.carbon-imports.com.au/product_info.php?products_id=258 (http://www.carbon-imports.com.au/product_info.php?products_id=258)

(http://www.carbon-imports.com.au/images/MetalTech%20wheel%20nuts2.jpg)

Also, some TSS Quick Change Carriers & Sprockets, and Lightened Flywheels for the rev heads...

http://www.carbon-imports.com.au/product_info.php?products_id=257 (http://www.carbon-imports.com.au/product_info.php?products_id=257)

http://www.carbon-imports.com.au/product_info.php?products_id=251 (http://www.carbon-imports.com.au/product_info.php?products_id=251)

(http://www.carbon-imports.com.au/images/11506.jpg)

(http://www.carbon-imports.com.au/images/10301+10401.jpg)

                            **** Effective Immediately ****

Carbon Imports & Accessories is now the sole official Australian Distributor for BST Wheels & Products, we will be offering a special deal for July on these Carbon Wheels in the next few days.

(http://www.e-securedsite.com/motowheels/ITALIAN/images%5Clg140270279.jpg)
(http://www.ducatinewstoday.com/wp-content/uploads/2009/10/43T0737PIX.jpg)

That's a great coup Oz.
Really hope it goes well for you, they are beautiful wheels and look  [evil] on bike.

Thanks Matt, am putting together a one off deal to offer everyone for our initial order to BST will post up in the next day or so hopefully...

Great pieces of kit Oz!  Congratulations on securing sole distributor status.

Cheers
Mike [thumbsup]

Will wait for the deal with interest...... ;D

Hi Guys

We have organised a BST Birthday sale to celebrate our appointment as BST Distributor for Australia, 15% off the RRP until August 15. This is a one off deal, and a 25% deposit is required. Once all orders are in we will place an order on BST and the wheels they don't have in stock will go into production (6-8 weeks), balance will be payable when stock lands in Australia prior to delivery to you..

The list attached is for Street Wheels - Single Sided Swingarms listed as Offset, Double sided as Conventional. The Wheels are priced as a set and conventional sets come with the sprocket carrier (see info below) so all you need is a sprocket.. we will be looking at carrying these soon as well..
Any questions please ask, PM me for order details.

Please feel free to offer this to friends and associates, and dealers are also welcome as we will have dealers in place also.

BST Conventional Rear wheels are supplied with the BST Sprocket Carrier.               
You will need a sprocket to fit this Carrier:               
   Details:   PCD of 5 hole = 100 mm         
      ID = 76 mm         

Fitment listing (pricing does not include Harley Davidson/ or Motard wheels)

http://www.blackstonetek.com/pages/application.htm (http://www.blackstonetek.com/pages/application.htm)

(http://i720.photobucket.com/albums/ww206/Michael2511/BSTBirthdaySale.jpg)

Sorry  for having a blonde moment, but what is the total cost minus the discount, just so I know what I am going to pay.

Hi Jukie

15% off the RRP whichever wheels you select - RRP down the Right Hand side... price includes front & rear wheels, and a sprocket carrier if your bike has a double sided swingarm (conventional).

Quote from: Jukie on July 22, 2010, 03:08:29 PM
Sorry  for having a blonde moment, but what is the total cost minus the discount, just so I know what I am going to pay.

I really hate checking this thread.

Bling overload!


Rob

keep the economy churning along - buy local  [thumbsup]

Quote from: ozducati on July 22, 2010, 03:16:49 PM
Hi Jukie

15% off the RRP whichever wheels you select - RRP down the Right Hand side... price includes front & rear wheels, and a sprocket carrier if your bike has a double sided swingarm (conventional).

sorry about that on my itouch i couldnt get the whole page up

no problem at all, never hurts to ask, the chart can be a little confusing  [beer]

Don't forget our BST sale ends August 15th, please PM me for a price if you are interested.


(http://i720.photobucket.com/albums/ww206/Michael2511/BSTTriumphSpeedTripleRearoutsideL.jpg)

(http://i720.photobucket.com/albums/ww206/Michael2511/bst_closeup2.jpg)
(http://i720.photobucket.com/albums/ww206/Michael2511/BSTLABELS.jpg)
(http://i720.photobucket.com/albums/ww206/Michael2511/bst_7spoke2.jpg)

Quote from: DUCMONROB on July 22, 2010, 07:03:55 PM
I really hate checking this thread.

Bling overload!


Rob

Makes my wallet pocket itch uncontrolably (almost [roll]

And my plastic start to smoke badly!!  [evil] [cheeky]

Please.......no more close ups......... [bow_down] 
Now how would i justify this.........safety factor maybe..???   

Quote from: Brian W on July 26, 2010, 12:34:31 AM
Now how would i justify this.........safety factor maybe..???   

well due to the reduced rotating mass this would mean you would be using less fuel and therefore reducing your carbon footprint??? ??? ??? ;D

Sounds like a valid reason - carbon wheels=fuel savings!  [thumbsup]

Hang on reducing your carbon footprint by using more carbon ???






[cheeky] ;D

Quote from: Betty on July 26, 2010, 02:06:15 PM
Hang on reducing your carbon footprint by using more carbon ???






[cheeky] ;D

yes I know bit of an oxymoron huh, but I am just trying to help the guy justify the purchase!  [laugh]  bit like these tree huggers that go and buy a Toyota Hybrid vehicle for the same reason (reducing carbon foot print) - and yet increasing the amount waste that cannot be recycled in years to come - but dont get me started on that!!  [cheeky]

Here's an example of the pricing for 7 & 5 Spoke wheels to suit single sided swingarms:

7 Spoke Black Mamba 3.5"x17.0 front + 6.0"x17.0 Rear                    $4699.00 less 15% = $3994.15

5 Spoke Black Diamond 3.5"x17.0 front + 5.75"x17.0 Rear                $ 4250.00 less 15% = $3612.50

5 Spoke Black Diamond 3.5"x17.0 Front + 6.0"x17.0 Rear                 $ 4299.00 less 15% = 3654.15

(http://i720.photobucket.com/albums/ww206/Michael2511/Ducati-1098-Wheels.jpg)
(http://i720.photobucket.com/albums/ww206/Michael2511/bst_7spoke_ssr.jpg)

(http://i720.photobucket.com/albums/ww206/Michael2511/BSTTriumphSpeedTripleRearoutsideL.jpg)

(http://i720.photobucket.com/albums/ww206/Michael2511/bst_closeup2.jpg)
(http://i720.photobucket.com/albums/ww206/Michael2511/BSTLABELS.jpg)
(http://i720.photobucket.com/albums/ww206/Michael2511/bst_7spoke2.jpg)

Quote from: Mr.S2R on July 26, 2010, 03:21:16 PM
yes I know bit of an oxymoron huh, but I am just trying to help the guy justify the purchase!  [laugh]  bit like these tree huggers that go and buy a Toyota Hybrid vehicle for the same reason (reducing carbon foot print) - and yet increasing the amount waste that cannot be recycled in years to come - but dont get me started on that!!  [cheeky]

Isn't using carbon wheels sequestering carbon?  It's being retained in the wheel instead of being released into the atmosphere.  Bit like turning wood into furniture rather than burning it.  Another tick for the environment.

different type of carbon guys....

Quote from: ozducati on July 26, 2010, 06:47:59 PM
Here's an example of the pricing for 7 & 5 Spoke wheels to suit single sided swingarms:

7 Spoke Black Mamba 3.5"x17.0 front + 6.0"x17.0 Rear                    $4699.00 less 15% = $3994.15

5 Spoke Black Diamond 3.5"x17.0 front + 5.75"x17.0 Rear                $ 4250.00 less 15% = $3612.50

5 Spoke Black Diamond 3.5"x17.0 Front + 6.0"x17.0 Rear                 $ 4299.00 less 15% = 3654.15

(http://i720.photobucket.com/albums/ww206/Michael2511/Ducati-1098-Wheels.jpg)
(http://i720.photobucket.com/albums/ww206/Michael2511/bst_7spoke_ssr.jpg)

(http://i720.photobucket.com/albums/ww206/Michael2511/BSTTriumphSpeedTripleRearoutsideL.jpg)

(http://i720.photobucket.com/albums/ww206/Michael2511/bst_closeup2.jpg)
(http://i720.photobucket.com/albums/ww206/Michael2511/BSTLABELS.jpg)
(http://i720.photobucket.com/albums/ww206/Michael2511/bst_7spoke2.jpg)

bump

Quote from: ozducati on July 26, 2010, 07:25:35 PM
different type of carbon guys....

Oz don't let facts get in the way of an excuse to buy CF wheels. I'm trying to do you a favour here.  [laugh]

Quote from: heatherp on July 26, 2010, 08:03:05 PM
Oz don't let facts get in the way of an excuse to buy CF wheels. I'm trying to do you a favour here.  [laugh]

+1 Heather!!  [clap]

Quote from: ozducati on July 26, 2010, 07:25:35 PM
different type of carbon guys....

ah so not all Carbon is created equal?  Just kidding Oz - just putting a little humour out there - it is a great product - just out of my price point!  ;D

oops my bad.. continue on selling the benefits of Carbon Wheels .....

I will have a couple of sets of these on sale very soon too .. super light Forged Alloy Oz Racing wheels ...


(http://i720.photobucket.com/albums/ww206/Michael2511/OZ_Piega.gif)

stop it! stop it now! this is porn for my bike! [moto] [thumbsup]











prices?? ;D

Quote from: Mr.S2R on July 27, 2010, 01:06:00 AM
stop it! stop it now! this is porn for my bike! [moto] [thumbsup]







prices?? ;D

am working them out.. will be around 10-20% off ...

OK, here goes - I have 3 sets of Oz Forged Alloy wheels to clear out - as listed below

These wheels arrived with a few slight blemishes/marks from anodizing.. 2 sets only have a slight blemish on the rear wheels (hardly noticeable)

1 x set of Gold Oz Forged Alloy Wheels

3.5"x17.0 Front (perfect) + 5.5""x17.0 Rear (slight blemishes) normally $2599 - less 15% $2209.15

The above rims will fit the following bikes:

Monster S4R/S4S 2003-2006 / Monster S2R800/S2R1000 2005-2008 / 748/916/996/998 / Multistrada 1000/1100*

1 x set of Black Oz Forged Alloy Wheels

3.5"x17.0 Front (perfect) + 5.5""x17.0 Rear (slight blemishes) normally $2599 - less 15% $2209.15

The above rims will fit the following bikes:

Monster S4R/S4RS 2006-2008 / 848 / Hypermotard


1 x set of Gold Oz Forged Alloy Wheels slight blemishes front & rear rims

3.5"x17.0 Front + 6.0"x17.0 Rear normally  $2599 less 20% $2079.20 inc GST



The above rims will fit the following bikes:

Ducati 1098/1198 / Streetfighter / Multistrada 1200







* Multistrada 1000/1100  requires a speedo spacer & new discs for the front wheel


(http://i720.photobucket.com/albums/ww206/Michael2511/PROD_piega_black_R.jpg)

(http://i720.photobucket.com/albums/ww206/Michael2511/WIDE_F_BLACK2.jpg)

(http://i720.photobucket.com/albums/ww206/Michael2511/WIDE_F_GOLD2.jpg)

(http://i720.photobucket.com/albums/ww206/Michael2511/RearSSW.jpg)

One set sold, 2 to go :)

Quote from: ozducati on July 27, 2010, 08:52:07 PM
OK, here goes - I have 2 sets of Oz Forged Alloy wheels to clear out - as listed below

These wheels arrived with a few slight blemishes/marks from anodizing.. 1 set only has a slight blemish on the rear wheels (hardly noticeable). the other has a slight blemish on each wheel, again barely noticeable..


1 x set of Black Oz Forged Alloy Wheels

3.5"x17.0 Front (perfect) + 5.5""x17.0 Rear (slight blemishes) normally $2599 - less 15% $2209.15

The above rims will fit the following bikes:

Monster S4R/S4RS 2006-2008 / 848 / Hypermotard


1 x set of Gold Oz Forged Alloy Wheels slight blemishes front & rear rims

3.5"x17.0 Front + 6.0"x17.0 Rear normally  $2599 less 20% $2079.20 inc GST



The above rims will fit the following bikes:

Ducati 1098/1198 / Streetfighter / Multistrada 1200







* Multistrada 1000/1100  requires a speedo spacer & new discs for the front wheel


(http://i720.photobucket.com/albums/ww206/Michael2511/PROD_piega_black_R.jpg)

(http://i720.photobucket.com/albums/ww206/Michael2511/WIDE_F_BLACK2.jpg)

(http://i720.photobucket.com/albums/ww206/Michael2511/WIDE_F_GOLD2.jpg)

(http://i720.photobucket.com/albums/ww206/Michael2511/RearSSW.jpg)

They're beautiful. Whatchya got in wheels for older Monsters?
I'll go to your site.

Hi koko

we can get either Oz Wheels or BST wheels in for your monster.. PM me for a quote if you are interested?

Quote from: koko64 on July 31, 2010, 12:20:39 AM
They're beautiful. Whatchya got in wheels for older Monsters?
I'll go to your site.

Gee I'm glad I've got a DSS bike.  My marriage is glad, too!

Quote from: suzyj on July 31, 2010, 12:08:15 PM
Gee I'm glad I've got a DSS bike.  My marriage is glad, too!

Don't worry, he's got some great wheels for DSS bikes too. They're a good enough price to leave some cash for marriage counselling. [evil]

Suzy, you girls should have this stuff down to a fine art by now.... "what shoes? I've had these for ages"  sounds similar to "what wheels? I've had these for ages" doesn't it ?? :D


BST & Oz wheels cater for DSS bikes... :)

(http://i720.photobucket.com/albums/ww206/Michael2511/PROD_F_R_GOLD-1.jpg)

(http://i720.photobucket.com/albums/ww206/Michael2511/bst_pair.jpg)

Quote from: suzyj on July 31, 2010, 12:08:15 PM
Gee I'm glad I've got a DSS bike.  My marriage is glad, too!

I'm not looking or listening.  la la la la   [laugh]

Quote from: heatherp on August 01, 2010, 04:36:07 AM
I'm not looking or listening.  la la la la   [laugh]

OK then... ;)

(http://i720.photobucket.com/albums/ww206/Michael2511/OZ_Piega.gif)

(http://i720.photobucket.com/albums/ww206/Michael2511/bst_5spoke2.jpg)

Not fair.   :-\  Luckily for me, I don't have a job so I can't afford to buy anything.  Very tempting, just looking tho.  [clap]

Don't forget our wheels on special..

One set sold, 2 to go :)

http://www.carbon-imports.com.au/index.php?cPath=64 (http://www.carbon-imports.com.au/index.php?cPath=64)

Quote from: ozducati on July 27, 2010, 08:52:07 PM
OK, here goes - I have 2 sets of Oz Forged Alloy wheels to clear out - as listed below

These wheels arrived with a few slight blemishes/marks from anodizing.. 1 set only has a slight blemish on the rear wheels (hardly noticeable). the other has a slight blemish on each wheel, again barely noticeable..


1 x set of Black Oz Forged Alloy Wheels

3.5"x17.0 Front (perfect) + 5.5""x17.0 Rear (slight blemishes) normally $2599 - less 15% $2209.15

The above rims will fit the following bikes:

Monster S4R/S4RS 2006-2008 / 848 / Hypermotard


1 x set of Gold Oz Forged Alloy Wheels slight blemishes front & rear rims

3.5"x17.0 Front + 6.0"x17.0 Rear normally  $2599 less 20% $2079.20 inc GST



The above rims will fit the following bikes:

Ducati 1098/1198 / Streetfighter / Multistrada 1200







* Multistrada 1000/1100  requires a speedo spacer & new discs for the front wheel


(http://i720.photobucket.com/albums/ww206/Michael2511/PROD_piega_black_R.jpg)

(http://i720.photobucket.com/albums/ww206/Michael2511/WIDE_F_BLACK2.jpg)

(http://i720.photobucket.com/albums/ww206/Michael2511/WIDE_F_GOLD2.jpg)

(http://i720.photobucket.com/albums/ww206/Michael2511/RearSSW.jpg)

ONE SET LEFT !!

Quote from: ozducati on July 27, 2010, 08:52:07 PM
OK, here goes - I have 1 set of Oz Forged Alloy wheels to clear out - as listed below

These wheels arrived with a slight blemish from anodizing..  (rear wheel hardly noticeable)

1 x set of Black Oz Forged Alloy Wheels

3.5"x17.0 Front (perfect) + 5.5""x17.0 Rear (slight blemishes) normally $2599 - less 15% $2209.15

The above rims will fit the following bikes:

Monster S4R/S4RS 2006-2008 / 848 / Hypermotard



(http://i720.photobucket.com/albums/ww206/Michael2511/PROD_piega_black_R.jpg)

(http://i720.photobucket.com/albums/ww206/Michael2511/WIDE_F_BLACK2.jpg)

ALSO DON'T FORGET OUR BST SALE ENDS AUGUST 15th !!

(http://i720.photobucket.com/albums/ww206/Michael2511/BSTAds.jpg)

SALE ENDS SUNDAY - PLEASE LET ME KNOW IF YOU WISH TO GET AN ORDER IN

Quote from: ozducati on August 09, 2010, 08:35:38 PM
ALSO DON'T FORGET OUR BST SALE ENDS AUGUST 15th !!

(http://i720.photobucket.com/albums/ww206/Michael2511/BSTAds.jpg)

LAST DAY TODAY ! ORDERS TO BE CONFIRMED BY MIDNIGHT, DEPOSITS MUST BE PAID BY MIDDAY TOMORROW (monday 16th August)

Quote from: ozducati on August 09, 2010, 08:35:38 PM
ALSO DON'T FORGET OUR BST SALE ENDS AUGUST 15th !!

(http://i720.photobucket.com/albums/ww206/Michael2511/BSTAds.jpg)

Just got  a new shipment of our Evo II Folding Levers in.. now have stock of the following

BMW S1000RR
Suzuki GSX-R600/750/1000
Triumph Daytona 675/Street Triple/Speed Triple R
Aprilia RSV1000/RSV4
Honda CBR600/1000/CB1000
MV Agusta F4/Brutale
Yamaha R1/R6
Ducati - all belt drive
KTM RC8 - coming soon

These levers are used by numerous racers in World Superstock & Supersport, as well as a lot of top riders in the Euro Championships.. names like Xavier Simeon, Cal Crutchlow, Eugene Laverty, Alex Polita etc ..

The Levers are a lightweight, folding lever, with replaceable blades & tips, and a choice of 4 colours for the tips... we can also order without the logo's and they are available for most modern bikes - please email me if yours is not listed.


(http://www.carbon-imports.com.au/images/Yamaha-EvoII-Pair.jpg)

(http://www.carbon-imports.com.au/images/Aprilia-EvoII-Pair.jpg)

(http://www.carbon-imports.com.au/images/Evo-II-Adjustable-Pair.jpg)

20% off Indoor Bike Covers until the end of August!

These are made by the same manufacturer that supplies Ducati, MV Agusta, Yamaha and many others.. nice soft indoor covers to keep your bike clean in the garage... Limited stock.

(http://www.carbon-imports.com.au/images/77.jpg)

DMF Discount available on all products - please register on the website and PM/email me to let me know you are a forum member.

Register here (http://"http://www.carbon-imports.com.au/create_account.php")

Check out the new Pricing on BST's for Australia, due to the strong dollar and our success with our initial BST orders, we have reviewed and reduced the pricing on all BST's across the range.

We were initially offering a stockist & dealer pricing, but have decided to cut the stockist pricing out, lower the RRP's and pass the savings on to the public! you guys..

Any questions, please ask.

New BST Pricing (http://"http://www.carbon-imports.com.au/index.php?cPath=92_186")

That's great news.
FYI though the link is dead.

do u have any carbon for the regular monsters yet? your website says coming soon still. m800 in particular.

Quote from: Roaduser on September 03, 2010, 11:34:49 PM
do u have any carbon for the regular monsters yet? your website says coming soon still. m800 in particular.

+1 , I've been checking your site also for my M1000, but nothing listed so far for carbon, had to get my front guard and seat cowl elsewhere  :-[

Quote from: DukeZ on September 04, 2010, 06:06:42 AM
+1 , I've been checking your site also for my M1000, but nothing listed so far for carbon, had to get my front guard and seat cowl elsewhere  :-[

+1 :'(

Here is the Link

http://www.carbon-imports.com.au/index.php?cPath=92_186 (http://www.carbon-imports.com.au/index.php?cPath=92_186)

Quote from: ozducati on September 03, 2010, 10:06:41 PM
Check out the new Pricing on BST's for Australia, due to the strong dollar and our success with our initial BST orders, we have reviewed and reduced the pricing on all BST's across the range.

We were initially offering a stockist & dealer pricing, but have decided to cut the stockist pricing out, lower the RRP's and pass the savings on to the public! you guys..

Any questions, please ask.

Hi Guys

Tell me what you want and i will source it, i have not gone too far with the Monster carbon as i have rarely been asked for it, so will not stock something that's not going to move.. tell me which bits are on your wishlist and i will put some pricing up and list them on the site...

Quote from: DukeZ on September 04, 2010, 06:06:42 AM
+1 , I've been checking your site also for my M1000, but nothing listed so far for carbon, had to get my front guard and seat cowl elsewhere  :-[

Id be interested in some sort of billet / carbon front sprocket cover, possibly also a belly pan.

will look and see what i can get in bellypans...

we have some EVR billet sprocket covers & can get carbon no problems..

http://www.carbon-imports.com.au/product_info.php?products_id=129 (http://www.carbon-imports.com.au/product_info.php?products_id=129)


(http://www.carbon-imports.com.au/images/Sprocket-Cover-1.jpg)

Quote from: cakeman on September 04, 2010, 09:29:44 PM
Id be interested in some sort of billet / carbon front sprocket cover, possibly also a belly pan.

Will be after a carbon 'no chop' tail tidy soon and maybe a belly pan. The other items you already stock, clutch pressure plate, sprocket guards ect.

Watch out DukeZ, the fun police might ping you on your avatar!?  [roll]

Personally I reckon its rather artistic in its context and composition!!  [evil] [drool] [cheeky]

im interested in belly pan, no chop tail tidy and belt covers for an 800.
will the clutch covers u make for the other dry clutch models fit the the wet clutch m800?

is it possible to have cf parts made in the satin finish like my remus pipes?

Cheers Clint

Hi Clint , am in the process of looking at a source for some of these products....

The clutch covers are for dry clutch only... and it is possible to have carbon finished in a satin or polished finish, depends on the manufacturer.. let me ask the question...

Quote from: Roaduser on September 07, 2010, 03:42:37 AM
im interested in belly pan, no chop tail tidy and belt covers for an 800.
will the clutch covers u make for the other dry clutch models fit the the wet clutch m800?

is it possible to have cf parts made in the satin finish like my remus pipes?

Cheers Clint

OK, am running this group buy by request on another forum and would like to extend it to you guys n gals as well...

if you would like to be part of the Group Buy for our Folding Levers, please list your bike (year & model)

Performance Technology Folding Levers (EvoII) are available for most modern sportsbikes, and have a replaceable lever blade & adjustable /replaceable tips.

RRP's are normally $299 pair for Brake + Hydraulic Clutch
                          $269 pair for Brake + Cable Clutch

If we can get min 10 pairs in the group buy we will offer a 20% discount off RRP & include postage within Australia.

I currently have stock of the following, any other models would have to be ordered in from Italy.

BMW S1000RR
Suzuki GSX-R600/750/1000 (current models)
Triumph Daytona 675/Street Triple/Speed Triple R
Aprilia RSV1000/RSV4
Honda CBR600/1000/CB1000 (current models)
MV Agusta F4/Brutale
Yamaha R1/R6 (current models)
Ducati - all belt drive
KTM RC8

Some images below:

(http://www.carbon-imports.com.au/images/Aprilia-EvoII-Pair.jpg)

(http://www.carbon-imports.com.au/images/Evo-II-Adjustable-Pair.jpg)

(http://www.carbon-imports.com.au/images/Yamaha-EvoII-Pair.jpg)

no one interested?

Quote from: ozducati on September 15, 2010, 04:00:29 PM
OK, am running this group buy by request on another forum and would like to extend it to you guys n gals as well...

if you would like to be part of the Group Buy for our Folding Levers, please list your bike (year & model)

Performance Technology Folding Levers (EvoII) are available for most modern sportsbikes, and have a replaceable lever blade & adjustable /replaceable tips.

RRP's are normally $299 pair for Brake + Hydraulic Clutch
                          $269 pair for Brake + Cable Clutch

If we can get min 10 pairs in the group buy we will offer a 20% discount off RRP & include postage within Australia.

I currently have stock of the following, any other models would have to be ordered in from Italy.

BMW S1000RR
Suzuki GSX-R600/750/1000 (current models)
Triumph Daytona 675/Street Triple/Speed Triple R
Aprilia RSV1000/RSV4
Honda CBR600/1000/CB1000 (current models)
MV Agusta F4/Brutale
Yamaha R1/R6 (current models)
Ducati - all belt drive
KTM RC8

Some images below:

(http://www.carbon-imports.com.au/images/Aprilia-EvoII-Pair.jpg)

(http://www.carbon-imports.com.au/images/Evo-II-Adjustable-Pair.jpg)

(http://www.carbon-imports.com.au/images/Yamaha-EvoII-Pair.jpg)

Finally, Metaltech have released the S2R/S4R/S4RS Rearsets..

http://www.carbon-imports.com.au/product_info.php?products_id=338 (http://www.carbon-imports.com.au/product_info.php?products_id=338)

(http://www.carbon-imports.com.au/images/3-111-500.jpg)

OMG

Now I have a problem what to choose!

Choose, choose, choose.
I think your bike has enough bling!
It's not a competition now, I'll race you to them!!!  [cheeky] [cheeky]

They look really nice Oz

two colour combos i see.......is the other black and red by chance M....?

sure is.. click on the link..

Quote from: Brian W on September 22, 2010, 02:56:00 AM
two colour combos i see.......is the other black and red by chance M....?

I am going to give the Group Buy another week, so cut off is Sept. 30th, we need minimum 10 sets all up to go with it, and special orders (what is not in stock) will take approx 3-4 weeks, please just post confirmation that you are in and what bike/model/year the levers are for. I will contact you to confirm.

Regards

Michael

Quote from: ozducati on September 15, 2010, 04:00:29 PM
OK, am running this group buy by request on another forum and would like to extend it to you guys n gals as well...

if you would like to be part of the Group Buy for our Folding Levers, please list your bike (year & model)

Performance Technology Folding Levers (EvoII) are available for most modern sportsbikes, and have a replaceable lever blade & adjustable /replaceable tips.

RRP's are normally $299 pair for Brake + Hydraulic Clutch
                          $269 pair for Brake + Cable Clutch

If we can get min 10 pairs in the group buy we will offer a 20% discount off RRP & include postage within Australia.

I currently have stock of the following, any other models would have to be ordered in from Italy.

BMW S1000RR
Suzuki GSX-R600/750/1000 (current models)
Triumph Daytona 675/Street Triple/Speed Triple R
Aprilia RSV1000/RSV4
Honda CBR600/1000/CB1000 (current models)
MV Agusta F4/Brutale
Yamaha R1/R6 (current models)
Ducati - all belt drive
KTM RC8

Some images below:

(http://www.carbon-imports.com.au/images/Aprilia-EvoII-Pair.jpg)

(http://www.carbon-imports.com.au/images/Evo-II-Adjustable-Pair.jpg)

(http://www.carbon-imports.com.au/images/Yamaha-EvoII-Pair.jpg)

Final week for this..

I spoke to a few of you at the DOC Concourse who wanted to participate in this deal, so PM me this week please..

Quote from: ozducati on September 23, 2010, 09:19:33 PM
I am going to give the Group Buy another week, so cut off is Sept. 30th, we need minimum 10 sets all up to go with it, and special orders (what is not in stock) will take approx 3-4 weeks, please just post confirmation that you are in and what bike/model/year the levers are for. I will contact you to confirm.

Regards

Michael

For the 696? I'm in. I'll PM you.

Hey Spot, yep, for the 696 too...

Quote from: spotcom on September 27, 2010, 03:05:54 AM
For the 696? I'm in. I'll PM you.

We'll be having a MotoGP sale in the next couple of weeks, with special offers on BST's & other selected products...

(http://i720.photobucket.com/albums/ww206/Michael2511/CarbonImports-BST-AMCN-0910.jpg)

Brian W



Youuuuu whoooooooooo

I see your name on a pair of these things!  [cheeky]

Did i hear someone mention my name...???    I will hang out and see what Michael's SPECIAL  Moto GP offer is......then convince myself that i need them    :D   

Need
Want
Must
Desire

Hey Brian, didn't you want Levers ?? group buy finishes midnight tonight...

Quote from: Brian W on September 29, 2010, 12:56:53 AM
Did i hear someone mention my name...???    I will hang out and see what Michael's SPECIAL  Moto GP offer is......then convince myself that i need them    :D   

One set of Oz wheels in Black to clear - suit S4R/S4RS (06>) M1100 / Hypermotard / 848

Only $2100.00 - Rear wheel has a slight blemish, barely noticeable, front wheel perfect.

http://www.carbon-imports.com.au/product_info.php?products_id=321 (http://www.carbon-imports.com.au/product_info.php?products_id=321)

(http://www.carbon-imports.com.au/images/PROD_piega_black_R.jpg)

No Michael, was just admiring the CF wheels.........

Admiring and about to pounce.

MotoGP Specials on selected items on the website, including $300 off the RRP of all BST Wheels.

Specials are spread through the different sections, not only in the "specials" section..

(http://i720.photobucket.com/albums/ww206/Michael2511/CarbonImportsBanners.jpg)

We are also offering 5% off Oz Motorbike wheels..

Quote from: ozducati on October 10, 2010, 04:55:28 PM
MotoGP Specials on selected items on the website, including $300 off the RRP of all BST Wheels.

Specials are spread through the different sections, not only in the "specials" section..

(http://i720.photobucket.com/albums/ww206/Michael2511/CarbonImportsBanners.jpg)

MotoGP deals finish end October...

Quote from: ozducati on October 10, 2010, 04:55:28 PM
MotoGP Specials on selected items on the website, including $300 off the RRP of all BST Wheels.

Specials are spread through the different sections, not only in the "specials" section..

(http://i720.photobucket.com/albums/ww206/Michael2511/CarbonImportsBanners.jpg)

We are now representing Capit Tyrewarmers in Australia, and will be offering an introductory special next week, these are one of the best warmers in the world, and are made in Italy.
Capit recently introduced a new TNT technology which does away with the thermostat and maintains a constant and even temperature on the tyre, with no cold spots and no thermostat failures.. best of all, Capit offer a 3 Year Manufacturers Warranty. We will be getting our first shipment in the next few weeks of Black & Red warmers, happy to order other colours on request.

Capit Tyrewarmers (http://"http://www.carbon-imports.com.au/index.php?cPath=83_248")

(http://i720.photobucket.com/albums/ww206/Michael2511/SportWarmer-Red.jpg)

We are now the Distributor for MWR Racing Airfilters in Australia.

MWR Racing Airfilters (http://"http://www.carbon-imports.com.au/index.php?cPath=250_251&osCsid=45c399df2f54461de73c0f8b858a72cd")

QuoteBREATHING LIFE INTO YOUR ENGINE !!

MWR airfilters are specific performance foam airfilters for motorcycles handmade in the Netherlands.
MWR airfilters are made of top quality materials ( FR Foam , stainles steel and aluminium )
Unlike all other foam filters MWR airfilters are made entirely from this special Fire Resistant (FR) foam
MWR airfilters are continuously developed and improved trackside with MWR supported teams around the world
MWR airfilters are not just copies of the OEM filter but in fact specific designs to enhance the performance in the best possible way for your bike and to also offer the best possible protection from dirt and dust for your engine.
Due to MWR airfilters being entirely constructed from foam and having no rubber mountings or mouldings MWR are able to utilise nearly 100% of the available area as filter element.  Once again this helps improve air flow and increase performance.
To help protect your engine MWR has specifically made biodegradable airfilteroil.  This MWR filteroil is made in Holland and is completely biodegradable not only protecting the environment but also your engine either for heavy duty (off road) usage or for long term normal (road/race) usage.
This biodegradable filteroil is also completely fire proof.
All MWR filters are shipped out pre-oiled and ready to install.

(http://www.racingairfilters.eu/data/media/air%20splitter%20blank%20for%20translation%20black%203%20copy.jpg)

Michael,.....

  Many thanks for the rearsets.......thought some people in here might like to see them fitted..
Dogs not included in the deal btw....notice there are "Two dogs" Dez.....you now have competition......

Brian

(http://i885.photobucket.com/albums/ac55/braando54/rearsets006.jpg)
(http://i885.photobucket.com/albums/ac55/braando54/rearsets002.jpg)
(http://i885.photobucket.com/albums/ac55/braando54/rearsetdogs001.jpg)

Looks good Brian. The competition of bling steps up again.
My latest "little" piece turned up finally and it's wrong!

Oh my those is purdy [thumbsup]
Nice bike too ;D
Hay did you run out of money spending it all on those rear sets ?
You must of cause you ran out of bolts on the clutch cover [laugh]

Now listen here Dez......do i need to stick a torch into the clutch to prove they are there,?  [bow_down] I had to go and unlock the garage, stick my head in and check.....yep...they are there, just recessed a little. Is that ok...?   ;D

Very nice Brian, thanks for your support! the bike looks great!

Quote from: Brian W on November 13, 2010, 04:54:32 PM
Michael,.....

  Many thanks for the rearsets.......thought some people in here might like to see them fitted..
Dogs not included in the deal btw....notice there are "Two dogs" Dez.....you now have competition......

Brian

(http://i885.photobucket.com/albums/ac55/braando54/rearsets006.jpg)
(http://i885.photobucket.com/albums/ac55/braando54/rearsets002.jpg)
(http://i885.photobucket.com/albums/ac55/braando54/rearsetdogs001.jpg)

Far Kernel Brian,

They look the dogs bollocks  [thumbsup] [bow_down] [drool]






                                 Mmick

Quote from: mattyvas on November 14, 2010, 12:06:15 AM
Looks good Brian. The competition of bling steps up again.
My latest "little" piece turned up finally and it's wrong!

So what is your "little" piece that was wrong Matty...? Common now, fess up. Bling you say..?  I class all mine as essential "safety"items......just ask my partner Jo  (as in Joanne) I could have a couple of other "safety " items soon, so i strongly suggest you dust the cobwebs off the MV Gucci wallet or your reputation could soon be in tatters....... ;D ;D ;D [laugh] [clap]

WARNING
Apparently Brian and Matty are undercover cohorts of Blingindustries.com
They have been sent to infiltrate the pages of DMF to propagate the
desire to enhance ones motorcycle using subliminal tactics and unscrupulous means,
making you jealous and part with your money.
There will be an intervention at the next DMF ride with professional psychological and financial
advice from leading experts.
I know as "I am an addict " and need help as you all do too.

Quote from: Two dogs on November 15, 2010, 06:51:49 PM
WARNING
...............

There will be an intervention at the next DMF ride with professional psychological and financial
advice from leading experts.

Are you crazy? People have mysteriously vanished, never to be found, after suggesting actions like that.
I know you mean well, but be careful. You don't know what you're up against [evil]

still no regular monster carbon fibre parts on your site!?! any news?

Don't know what drugs you are on Dez.......apart from those Rearsets Ï had to purchase" , the rest of my bike is bog standard.....!!!!!!!!!!......... ;D

I think Brian could do the opposite and teach you all the values of buying quality products which enhance your safe riding, and help support local business's that support local forums and racing in australia.. i am happy to help Brian in his monumental task at hand...  [beer]

Quote from: Two dogs on November 15, 2010, 06:51:49 PM
WARNING
Apparently Brian and Matty are undercover cohorts of Blingindustries.com
They have been sent to infiltrate the pages of DMF to propagate the
desire to enhance ones motorcycle using subliminal tactics and unscrupulous means,
making you jealous and part with your money.
There will be an intervention at the next DMF ride with professional psychological and financial
advice from leading experts.
I know as "I am an addict " and need help as you all do too.

working on it.. the main problem i am facing is finding a manufacturer who is of the quality we demand for our carbon, seems there's a lot around for the monsters, but is also a lot of rubbish i am not comfortable with selling. Pricing is also an issue, as is no good us buying in carbon that's too expensive and it sits on the shelf, and with the AUD the way it is, seems most are happy to buy overseas anyway.. but i will keep searching, have not forgotten i assure you..

Quote from: Roaduser on November 16, 2010, 01:39:51 AM
still no regular monster carbon fibre parts on your site!?! any news?

Quote from: ozducati on November 16, 2010, 05:13:40 PM
I think Brian could do the opposite and teach you all the values of buying quality products which enhance your safe riding, and help support local business's that support local forums and racing in australia.. i am happy to help Brian in his monumental task at hand...  [beer]

Michael just having a little joke with the boys  ;D
Not out to offend you or you fine products  [thumbsup]
Ill shut up now  :-X

Hey no problem, i knew it was a joke, and replied as such .. no offense taken at all 2D  [beer]

Quote from: Two dogs on November 16, 2010, 07:38:17 PM
Michael just having a little joke with the boys  ;D
Not out to offend you or you fine products  [thumbsup]
Ill shut up now  :-X

Don't stop the banter Dez.......laughter is healthy mate.........just let me win, thats all.... ;D

Shipment on the way, will be here early next week..

Quote from: ozducati on November 11, 2010, 02:45:55 PM
We are now the Distributor for MWR Racing Airfilters in Australia.

MWR Racing Airfilters (http://"http://www.carbon-imports.com.au/index.php?cPath=250_251&osCsid=45c399df2f54461de73c0f8b858a72cd")


(http://www.racingairfilters.eu/data/media/air%20splitter%20blank%20for%20translation%20black%203%20copy.jpg)

This shipment also on the way and will be here early next week..

Quote from: ozducati on November 11, 2010, 02:13:19 PM
We are now representing Capit Tyrewarmers in Australia, and will be offering an introductory special next week, these are one of the best warmers in the world, and are made in Italy.
Capit recently introduced a new TNT technology which does away with the thermostat and maintains a constant and even temperature on the tyre, with no cold spots and no thermostat failures.. best of all, Capit offer a 3 Year Manufacturers Warranty. We will be getting our first shipment in the next few weeks of Black & Red warmers, happy to order other colours on request.

Capit Tyrewarmers (http://"http://www.carbon-imports.com.au/index.php?cPath=83_248")

(http://i720.photobucket.com/albums/ww206/Michael2511/SportWarmer-Red.jpg)

Quote from: ozducati on November 24, 2010, 03:46:01 PM
This shipment also on the way and will be here early next week..

How many $ for the Warmers? Are they factory set to a certain temp?

They are on the website, the TNT Sportwarmers are set to a constant 80 degrees, warmers have a 3 years warranty..

http://www.carbon-imports.com.au/index.php?cPath=249 (http://www.carbon-imports.com.au/index.php?cPath=249)

Quote from: tricolore on November 24, 2010, 06:41:56 PM
How many $ for the Warmers? Are they factory set to a certain temp?

Filters & Tyrewarmers arrived today and now in stock

http://www.carbon-imports.com.au/index.php?cPath=250 (http://www.carbon-imports.com.au/index.php?cPath=250)

http://www.carbon-imports.com.au/index.php?cPath=249 (http://www.carbon-imports.com.au/index.php?cPath=249)

Coming on the ride Michael...???   Go on.......can keep me company .......

just sold my Multi, don't want to risk it sorry mate...will have to wait for new project/bike ...

Quote from: Brian W on November 29, 2010, 02:23:59 AM
Coming on the ride Michael...???   Go on.......can keep me company .......

Yep saw it on ebay then it was gone. You still got the PVM's?

yep, had a call with the right numbers so pulled the listing.. PVM's for sale :)

Quote from: mattyvas on November 29, 2010, 11:12:37 PM
Yep saw it on ebay then it was gone. You still got the PVM's?

Hope everyone had a great & safe New Year!


Red Hot new Pricing on BST Carbon Wheels (http://"http://www.carbon-imports.com.au/index.php?cPath=92_186") effective from January 1, 2011

sniff sniff............. [popcorn]

Two sets?

you know you want to....

Quote from: Brian W on January 03, 2011, 11:07:06 PM
sniff sniff............. [popcorn]

BST make wheels for the MV's as well :D

Quote from: mattyvas on January 04, 2011, 03:09:23 AM
Two sets?

New Pricing, Price Reductions and specials on most items, check out the website for details!

www.carbon-imports.com.au (//http://)

QuoteCarbon Imports & Accessories has recently been appointed as sole Authorised Distributor for the range of Bitubo Race suspension products, developed in WSBK racing, the range includes completely adjustable Pressurised Forks, Fork Cartridges, Spring Kits, Shock Absorbers & Steering Dampers, contact Carbon Imports for more details. Dealer enquiries welcome. www.carbon-imports.com.au (http://www.carbon-imports.com.au) or sales@carbon-imports.com.au

(http://database.photozac2.com/bitubo_images/FORCELLA%20RDH_Tappi.jpg)

(http://database.photozac2.com/bitubo_images/ECH%202_sito.jpg)
(http://database.photozac2.com/bitubo_images/XXF31_2010.jpg)

(http://database.photozac2.com/bitubo_images/KFORK_Cat.jpg)

The BIG Bling Sale

Wheels, Clutch Covers, Bar Ends, Oil Filler Caps, Tail Tidy's, Fuel Caps, GPS Laptimers, Sidestand Bypass's, and lots more... something for everyone!

BIG Bling Sale (http://www.carbon-imports.com.au/index.php?cPath=64")

link doesn't seem to be working.  ???

Quote from: Roaduser on January 29, 2011, 06:14:52 AM
link doesn't seem to be working.  ???

http://www.carbon-imports.com.au/index.php?cPath=64%22 (http://www.carbon-imports.com.au/index.php?cPath=64%22)

try this - one too many http's..... [thumbsup]

Sorry Guys, fixed...

More bits added, some items we are clearing stock, others simply reducing stock levels, some have sale prices, others we have simply reduced the price to clear... ask away if any questions..

BIG Bling Sale - Click Here (http://www.carbon-imports.com.au/index.php?cPath=64")

Where are all the clutch slave cyl specials oz  ;) ?

i reduced the price on those a little while, so no extra sorry...

Quote from: Dave on February 05, 2011, 03:22:12 AM
Where are all the clutch slave cyl specials oz  ;) ?

Quote from: ozducati on February 06, 2011, 02:31:53 PM
i reduced the price on those a little while, so no extra sorry...

Well bugger ya then!!!!!!




Ordered one anyway  [thumbsup]

Thanks Dave, might even send it you .. [thumbsup] appreciate your business..

Quote from: Dave on February 07, 2011, 03:39:35 AM
Well bugger ya then!!!!!!




Ordered one anyway  [thumbsup]

Ordering more tyrewarmers today if anybody is interested ? will be ordering some Supermoto & GP sizes in addition to the SBK ones we carry.. PM me if interested...

Batteries are in, 8 cell sold out already, and have ordered more, 4 & 12 cell in stock..

(http://www.carbon-imports.com.au/images/mota-lab_superlight_4_cell_race_battery.jpg)

(http://www.carbon-imports.com.au/images/mota-lab_superlight_12_cell_battery.jpg)

What has happened to the website? I keep getting told this -

Reported Attack Page!
This web page at www.carbon-imports.com.au (//http://) has been reported as an attack page and has been blocked based on your security preferences.

It's been hacked and I'm guessing is under repair.
I am sure we will hear when it's safe to return.

Thanks for the reply Matty. I thought it might have only been me.

Thanks Matt, not been hacked, but attacked by a virus, my web guys tell the virus is on the hosting company's server, the hosting company say no way.. anyway, they nearly have it fixed..

Sorry to hear that, I am sure it will be back up quickly.

Quote from: ozducati on February 22, 2011, 01:28:53 PM
Batteries are in, 8 cell sold out already, and have ordered more, 4 & 12 cell in stock..

(http://www.carbon-imports.com.au/images/mota-lab_superlight_4_cell_race_battery.jpg)

(http://www.carbon-imports.com.au/images/mota-lab_superlight_12_cell_battery.jpg)

have you got some more info on these batteries, do they replace a stock duc battery, how big are they???

4 cell suits race bike up to 600cc

8 cell suits race bike up to 1000cc & road bike up to 600cc

12 cell suits race bike up to 1600cc & road bike up 1000cc

4 Cell Superlight Battery
weight: 420 g (.92 lbs)
rating: 2.6Ah
discharge: 150A
dimensions: 120mm x 30mm x 57mm
price: $119.95

8 Cell Superlight Battery
weight: 780 g (1.72 lbs)
rating: 5.2Ah
discharge: 300A
dimensions: 120mm x 60mm x 57mm
price: $219.95

12 Cell Superlight Battery
weight: 1100 g (2.43 lbs)
rating: 7.8Ah
discharge: 450A
dimensions: 120mm x 90mm x 57mm
price: $319.95

Quote from: ollie on April 10, 2011, 03:48:47 AM
have you got some more info on these batteries, do they replace a stock duc battery, how big are they???

thanks for that,

What does the specification 'race bike only' mean - I'm assuming no power unless engine is running?

Race bikes generally don't have headlights/taillights and extra electricals drawing current

Quote from: ollie on April 11, 2011, 02:17:06 AM
thanks for that,

What does the specification 'race bike only' mean - I'm assuming no power unless engine is running?

Website up and running again!

After our recent issues, website up and running again with all problems resolved, thanks for your patience and support!

www.carbon-imports.com.au (//http://)

End of Financial Year Sale up to 10% on most products, sale ends June 30th

Quote from: DosVerde on February 03, 2010, 01:49:48 AM
(http://i720.photobucket.com/albums/ww206/Michael2511/QuatD-Monster.jpg)

I could nearly be persuaded to sell the S4R and get a silver M1100 and a QuatD  ;D

OK, so after thinking about it for nearly 2 years, I reckon I'm ready to bite the bullet on one of these for my S4R (can't rush into these decisions).

One question first ..... Do they have removable baffles?

http://qdexhaustusa.com/producthome.php?make=16 (http://qdexhaustusa.com/producthome.php?make=16)

Looks like it.

Thanks Rowdy,

Hmmm, seem's the earlier model didn't but later ones did, I hope Carbon Imports have the later ones. The original ones sound pretty quiet on youTube, can't have that!!!

Is OZDucati still Lurking on here? Maybe a PM is in order....