|
Title: Some shiney new bits n pieces Post by: Charlief on February 21, 2010, 04:11:02 AM I just picked up some shiney new bits from the powdercoat man
(http://i241.photobucket.com/albums/ff27/charlieff/photo-14.jpg) (http://i241.photobucket.com/albums/ff27/charlieff/photo-13.jpg) (http://i241.photobucket.com/albums/ff27/charlieff/photo-15.jpg) and some parts from the anodizing man (http://i241.photobucket.com/albums/ff27/charlieff/photo-16.jpg) shipped off the fork bits to Eric at Clubhouse Motorsports for some new internals. Nate (DucPainter) is refreshing my plastics. Now if I can put all the pieces back in the right places! [cheeky] Title: Re: Some shiney new bits n pieces Post by: ducpainter on February 21, 2010, 04:31:08 AM How close a match is the tangerine?
Title: Re: Some shiney new bits n pieces Post by: Charlief on February 21, 2010, 04:37:22 AM How close a match is the tangerine? not at all!! I'm going for something a little different. That's just me! Title: Re: Some shiney new bits n pieces Post by: ducpainter on February 21, 2010, 04:40:41 AM not at all!! You...I'm going for something a little different. That's just me! different? [laugh] [laugh] [laugh] [laugh] Title: Re: Some shiney new bits n pieces Post by: corey on February 22, 2010, 04:39:16 AM this is awesome. loving it man!
those bars look great coated black. i love the notes for the powder coating guy... NO! NO! and it looks like he STILL missed on hahaha. Title: Re: Some shiney new bits n pieces Post by: Mojo S2R on February 22, 2010, 06:04:14 AM Sweet. [thumbsup]
Damn! More mod ideas. [bang] Can't wait to see the pics when all that gets mounted. It may have been done but I don't recall seeing it. So if there's no pix, it didn't happen. ;D Title: Re: Some shiney new bits n pieces Post by: Munch on February 23, 2010, 02:43:09 PM What did that lot of anodizing run ya?
Title: Re: Some shiney new bits n pieces Post by: Charlief on February 23, 2010, 02:50:59 PM What did that lot of anodizing run ya? Hard coat ano $75 for everything It was a pregnant dog to find someone to do it... most companies want to deal with commercial volumes. Title: Re: Some shiney new bits n pieces Post by: Munch on February 23, 2010, 02:51:58 PM Thanks! Lookin good!
Bookmarked! Title: Re: Some shiney new bits n pieces Post by: Mojo S2R on February 23, 2010, 08:20:56 PM Charlief,
If I'm not mistaken I think I see grills off a set of Hella Supertone Horns in that first pic. I just ordered a set of those myself. How did you mount them? Any issues I may run into? TIA Title: Re: Some shiney new bits n pieces Post by: Charlief on February 24, 2010, 01:28:48 AM Charlief, If I'm not mistaken I think I see grills off a set of Hella Supertone Horns in that first pic. I just ordered a set of those myself. How did you mount them? Any issues I may run into? TIA you are correct on the horns. I have a twin headlight setup. I have one horn in the stock location and the other directly under the headlights. Mounted it right above the lower triple. As far as wiring I used the stock pos and neg wiring with a relay. The pos wire is the trigger for the relay. The power was wired directly to the battery ( with a fuse) Title: Re: Some shiney new bits n pieces Post by: DucatiTorrey on February 24, 2010, 09:11:05 AM Hard coat ano $75 for everything It was a pregnant dog to find someone to do it... most companies want to deal with commercial volumes. its hard for me to find powder guys around for this reason, but ano, i would love to anodize my forks red or gold Charlief, :oIf I'm not mistaken I think I see grills off a set of Hella Supertone Horns in that first pic. I just ordered a set of those myself. How did you mount them? Any issues I may run into? TIA |