|
Title: In need of help ! Post by: jskillz411 on March 10, 2010, 09:44:16 AM hello Ducati fans, I'm 21yrs old , owner of a 2002 Ducati monster ie S 750 ! I'm majoring in engineering and currently i'm working on a project using auto cad inventor ;so decided to do the front tire of a ducati monster along with the rotors and braking system. now I'm in need of a nice schematics of the front wheel or maybe an exploded view along with the exact measurements ! If someone knows where i can find this information it would be very helpful . thank you
other wise my last choice is to dissemble my front wheel and do the measurements piece by piece [beer] Title: Re: In need of help ! Post by: mitt on March 10, 2010, 05:56:35 PM I have never seen any drawings with dimensions. I have used a couple .jpg's in the past to "scale" drawings off of. I will look and see if I can find them.
If you have access to a CMM at your school, use that! The one I have at work uses a laser, and can pretty much reverse CAD engineer a part in minutes. mitt Title: Re: In need of help ! Post by: mitt on March 10, 2010, 06:05:06 PM here is one
https://lh5.ggpht.com/_GmPktBf8jlk/S5hqTSIPUpI/AAAAAAAAARw/nHk1Rc4pPSw/bikes_tech_drawing_monster_big.jpg (https://lh5.ggpht.com/_GmPktBf8jlk/S5hqTSIPUpI/AAAAAAAAARw/nHk1Rc4pPSw/bikes_tech_drawing_monster_big.jpg) and another that might help scale things https://lh5.ggpht.com/_GmPktBf8jlk/S5hqTuMaslI/AAAAAAAAAR0/0iWrg41CHR8/DucatiManualeMonster900_259_0001.jpg (https://lh5.ggpht.com/_GmPktBf8jlk/S5hqTuMaslI/AAAAAAAAAR0/0iWrg41CHR8/DucatiManualeMonster900_259_0001.jpg) keep us updated. mitt |