Is there a difference between the ST based frames and 888 based frames for high mount exhausts?
bump
How are the cans supported?
i'd curious to see what kind of clearance there is between the hoop and the pipe on those high mount systems
I have a set of Sil Motor High Mounts and they just don't seem to fit right, no where near as much clearance with respect to the side covers as a friend who has a set of Arrow Pipes. I have seen eBay auctions state that certain exhausts will not fit on the fuel injected models, but I don't understand why especially without the hoop in the way. (http://cgi.ebay.com/ebaymotors/Ducati-Monster-Highmout-Slip-on-Exhaust_W0QQcmdZViewItemQQhashZitem5ad8bd12e1QQitemZ390183326433QQptZMotorcyclesQ5fPartsQ5fAccessories#ht_997wt_940 (http://cgi.ebay.com/ebaymotors/Ducati-Monster-Highmout-Slip-on-Exhaust_W0QQcmdZViewItemQQhashZitem5ad8bd12e1QQitemZ390183326433QQptZMotorcyclesQ5fPartsQ5fAccessories#ht_997wt_940))
I can't find any information on these pipes, I've only seen another set similar on eBay briefly, and two youtube results, with my pipes most similar to the 2nd result.
Ducati Monster with high mounted Silmotor exhaust (http://www.youtube.com/watch?v=kZY6BxBbTFA#lq-lq2-hq-vhq)
Ducati monster exhaust Sil Motors Imola (http://www.youtube.com/watch?v=_9xrLMHo1JA&feature=related#lq-hq-vhq)
My bike. My cans are supported just like the other Sil Motor systems.
(http://6414341265231769585-a-1802744773732722657-s-sites.googlegroups.com/site/ajwduc/2010-3-12---misc/P3280026.JPG?attachauth=ANoY7co-FRExps-vIYyjrKYqnDx843vwPB67md3sw0d2zjI_sktWlCIHkJaTkIaHeq69fIrR5PN3ZrTx19iANVFdplmsQgtmrzzTKiVtpC-0hYAVDZw47BXWplev8memqcYpQBEWD7VEXAbOjZNTzPe3m021suAcR4BWgynYxuJ0Bjko6Ywj1Xwlh1MaINn-yaPapiKgrJwGktRBDe4FZNvkLXWQjM6spQ%3D%3D&attredirects=0)
maybe someone out there has a high mount system with a hoop?
I've got Sil high mounts with a hoop, no problems with clearance anywhere.