Print Page - output shaft endfloat

Title: output shaft endfloat
Post by: spook on April 16, 2010, 02:46:30 PM

this morning I dusted of my 95 monster and checked it over and noticed that the output shaft has small amount of endfloat (not sprocket on shaft). Is this something to worry about and how much endfloat is acceptable.

Any help would be appreciated.

Cheers, Spook

Title: Re: output shaft endfloat
Post by: ducpainter on April 16, 2010, 02:50:24 PM

pm ducvet...he'll know.

Title: Re: output shaft endfloat
Post by: greenmonster on April 17, 2010, 06:53:20 AM

Around 0.10mm is normal & nothing to worry about. [thumbsup]

Title: Re: output shaft endfloat
Post by: spook on April 17, 2010, 12:19:29 PM

Have just measured the endfloat and is about .5mm or 20thou, has no axial play and bearing feels smooth. was concerned that somethibg was flogged out.

Cheers, Spook

Ducati Monster Forum

Moto Board => Tech => Topic started by: spook on April 16, 2010, 02:46:30 PM