The following pic shows the hose guides on the DP 696/1100 oil cooler
(http://img198.imageshack.us/img198/9021/dsc00132q.jpg) (http://img198.imageshack.us/i/dsc00132q.jpg/)
Question is: How do you secure the hose guides to the vent cover?
Right now, the guides are in the mounting hole but they are loose.
I noticed that there is a pin that possibly expands the stud on the guide into the hole on the vent cover
Anybody?
I went to the dealer and looked at a M1100
The pin inside the hose guide was pushed in which mushrooms the stud into the mounting hole
Went home and pressed the pin in with a small c-clamp - worked like a charm
Now the hose guides don't move around
Not bad when you use the round thing attached to your neck ;D
BTW, hope this helps someone else
is that the dp cooler? it doesnt' come with stainless lines?
yep its the dp cooler
the hose you see is from the canister
[laugh] Even Ducati understand that the canister will be taken off. Why bother fastening the hose guides [thumbsup]