|
Title: 94 m900 parts? Post by: werd700 on May 22, 2010, 01:45:27 PM hey guys i am new here and i could really use some help trying to find a parts breakdown for my bike. i was hopping some of you guys who have been riding these bikes for a while would have an idea where to look. and if not does any one know where you can find a gasket kit for a carb rebuild?
Title: Re: 94 m900 parts? Post by: kopfjäger on May 22, 2010, 07:40:57 PM Try here. http://www.ca-cycleworks.com/ (http://www.ca-cycleworks.com/)
Title: Re: 94 m900 parts? Post by: werd700 on May 23, 2010, 03:57:35 AM thank you i was hopping more for like a parts diagram but this is a good start. has anyone used the Factory Pro titanium kit to rebuild their carbs? does it have all the o rings and bowl gaskets?
Title: Re: 94 m900 parts? Post by: ducpainter on May 23, 2010, 04:35:58 AM thank you i was hopping more for like a parts diagram but this is a good start. has anyone used the Factory Pro titanium kit to rebuild their carbs? does it have all the o rings and bowl gaskets? You can get a pdf parts diagram from Ducati for an '01 750...it will work for your purposes on a 900.Title: Re: 94 m900 parts? Post by: ScottRNelson on May 25, 2010, 01:54:47 PM thank you i was hopping more for like a parts diagram but this is a good start. has anyone used the Factory Pro titanium kit to rebuild their carbs? does it have all the o rings and bowl gaskets? The Factory Pro jet kit has jets, needles, springs, and some allen-head bolts to replace the screws that always strip. No O-rings or gaskets included.Title: Re: 94 m900 parts? Post by: mojo on May 25, 2010, 03:17:20 PM If you have the same 38mm Mikuni carbs as my '99, bikebandit.com has a parts diagram for the carbs...except they don't have Ducati parts. But, the '94 Yamaha YZF750RF has the same carbs.
Title: Re: 94 m900 parts? Post by: cyrus buelton on May 26, 2010, 04:17:29 AM screw rebuilding the carbs...........
pony up and buy the 41mm FCR's You won't regret that decision. |