Before buying the $100+ kit to eliminate your fender...just get out the skilsaw.
The day I got my bike home I chopped off the gay rear fender.
I did this a few months ago and just got around to posting. I am not very good at instructions so I hope the pics help....
Just got it home. Lame fender.
(http://im-dirty.com/pics/duc1.JPG)
I forgot to get before pics. This is after the cut.
(http://im-dirty.com/pics/duc2.JPG)
Before install. The seat latch cable coils nicely in the round recess on top.
(http://im-dirty.com/pics/duc3.JPG)
Removed lic bracket from scrap piece, removed reflectors, and mounted it upside down. Had to drill holes in plastic under seat thingy.
(http://im-dirty.com/pics/duc4.JPG)
Closeup of the cut.
(http://im-dirty.com/pics/duc5.JPG)
Another closeup. See where I drilled holes for lic plate. Not pictured but
I also sandwiched "L" brackets in between these pieces to hold directionals.
(http://im-dirty.com/pics/duc6.JPG)
Brothers girlfriend. Nice butt.
(http://im-dirty.com/pics/duc7.JPG)
Directionals on "L" brackets swing under the seat for a flush look. Right one can swing out to access keyhole.
(http://im-dirty.com/pics/duc8.JPG)
The tailight illuminates the plate red. I got no problems from the popo but i later added LED lic plate bolts which look great.
i chopped mine wayyy back. [evil] i plan on filling in the void with some fiberglass and all will be well after that.
(http://distortedolskool.smugmug.com/Cars/Ross/DSC0017/870471434_bUrWE-L.jpg)
Quote from: rosstermyer on June 12, 2010, 05:07:48 PM
i chopped mine wayyy back. [evil] i plan on filling in the void with some fiberglass and all will be well after that.
(http://distortedolskool.smugmug.com/Cars/Ross/DSC0017/870471434_bUrWE-L.jpg)
whoaaaaaaaaa badddass!
woah.. what did you do to your exhausts???
i ran open exhaust with termi db killers held in by slipon springs to see if i liked the sound/loudness of something custom like boomtubes. after a week of bleeding ears and weird looks from people i decided to stick with the cf termis. [evil]