So I am finally getting the chop done and my buddy doing the job (I don't have a garage) asked for a picture to go by, though we've looked at the bike together and are on the same page on where to chop the frame that would probably help a bit. Going to replace the stock with an integrated tail light and lose the beer tray altogether.
Anybody got some pics of some nice tail for me? Thanks.
just did this two weeks ago, and it was 6 1/2" from the tip of the frame.
(http://img.photobucket.com/albums/v661/willz2155/IMG_0036.jpg)
check the tutorials section. There is one there with a heap of great pics
Page thru this link
http://ducatimonsterforum.org/index.php?topic=36506.0 (http://ducatimonsterforum.org/index.php?topic=36506.0)
Can always check out my thread (http://ducatimonsterforum.org/index.php?topic=34868.0), bunch of pictures there too... [thumbsup]
Thats what I did with mine :
(http://www.lotuscars.de/Bella_Macchina/ChopJob/Chop-Job.jpg)
(http://www.lotuscars.de/Bella_Macchina/ChopJob/DSC00346.JPG)
The silver parts are for additional turn indicators if I plan to go back to Germany one day.
I only have 1 that is any good of the rear of the bike. Hope it helps.
(https://lh5.ggpht.com/_wOZuAIM4OIA/S8pnWx1T1OI/AAAAAAAACeg/ZKDxcvagVPk/s800/Ducati%20Mods%207.jpg)
Chop chop away!
(http://i617.photobucket.com/albums/tt251/vizi-tec/2006%20Monster%20Project/supanova3.jpg)
(http://farm3.static.flickr.com/2337/2500757807_8d29b3f2fd_b.jpg)
(https://farm4.static.flickr.com/3064/2482058926_7015f6d89d_b.jpg)
(http://farm3.static.flickr.com/2373/2457987087_951a75b12a_b.jpg)
Quote from: Juan on June 25, 2010, 06:23:00 AM
Every time you post pictures of your bike I feel inadequate. [drool]
Jay, I have a step by step procedure that I wrote up a while back. let me know if you wat it and I'll email it to you.
Ooh, nice pics all around - thanks guys.
Quote from: FastAndLight on June 24, 2010, 03:53:10 PM
I only have 1 that is any good of the rear of the bike. Hope it helps.
(https://lh5.ggpht.com/_wOZuAIM4OIA/S8pnWx1T1OI/AAAAAAAACeg/ZKDxcvagVPk/s800/Ducati%20Mods%207.jpg)
Ouch.. that is a crazy good-looking bike dude.
Yeah. What tail light is that?
here's how to do it, but you'll need more than a hacksaw...
(http://i249.photobucket.com/albums/gg216/mikesixtysix/blackfog/IMG_3828.jpg)
(http://i201.photobucket.com/albums/aa91/chiflado/1a.jpg)
(http://i201.photobucket.com/albums/aa91/chiflado/1d.jpg)
My jaw is on the floor. [bow_down]
Most kits will allow you to cut all the way up to the lock bracket on the right side (except for the TPO kit).
I used a pipe cutter, so I couldn't get it all off.
(http://i4.photobucket.com/albums/y126/hundredpercentkill/Motorcycles/IMG00041-20100629-2336.jpg)
Cut off the lock bracket. ;)
Someday... ;)
Here's mine, my liscense plate was damaged in a previous iteration.
(http://s3.amazonaws.com/twitpic/photos/full/95399214.jpg?AWSAccessKeyId=0ZRYP5X5F6FSMBCCSE82&Expires=1277921718&Signature=ar4ZdaXSXADe%2BweHv3e5MiFIpu8%3D)
I have a black billet alum license plate bracket I'd sell for $40 + shipping. I paid $75 for it and never used it. It was posted here a while back or email me for photos.
silas1064@hotmail.com