will 1999 Ducati 900SS forks work on 2003 m620? and will the :-\brake calipers be the same?
Not 100% sure, but mostly that the axle is different. If it's like my 2000 monster, the speed to is mechanical and linked to the front wheel. So the axle has a different diameter and you'd possibly need some spacers like this http://www.tpoparts.com/catalog/product_info.php?products_id=273&osCsid=20g17fmtj1ld6l5a726e88ujj2 (http://www.tpoparts.com/catalog/product_info.php?products_id=273&osCsid=20g17fmtj1ld6l5a726e88ujj2) and different wheel bearings to use those forks... and the axle of course.
As far as the calipers - those should be the same 65mm mount you have.
Aren't the top tubes longer than the Monster tubes? Measure your M forks (axle c/l to triple clamp) so you can install the SS at the same height.
thank you guys,I'll keep you up todate [thumbsup]
SS900 forks were changed after 1998 and the later ('99-'01) forks fit >2002<2008(?) Monsters perfectly - except for length. They're way too long, and require a change in handlebars, IME. I installed them on my 2003 M800 and went to above-the-triple clip-ons.
The stock springs in the '99 SS900 forks are weak progressive rate ones, and the RaceTech replacements don't fit - they're too small in ID, at least the pair that I bought were. ST springs are the correct diameter and length.
sweet that's great to know ,damn I love this forum. So much info. MONSTERISM rock
just wanted to say that the frokS fit well and have change the ride so much [thumbsup]