Ive got the stock brake lines.
Ive got clip-ons above the triple and 749 forks. Now my front brake lines are too long.
Behind my headlight is a tight mess.
Id like to eliminate the "T" behind the light and have a double banjo bolt with a line going to each front caliper.
I'm thinking Galfer lines. Anyone have a measurement handy? Any suggestions?
Thanks in advance!
Put the double banjo bolt in the right caliper. Run one line from the MC to the right caliper and a second line from the right caliper to the left. You'll need 90° fitting on the line that connects the calipers.
If you're interested, I'll snap some pics tomorrow.
Hm one less line behind my headlight. Me likey!
Pics would be awesome, thank you!
(http://www.personal.psu.edu/adv11/front.jpg)
(http://www.personal.psu.edu/adv11/side.jpg)
A SBK style line works great too.
One line to the right caliper with a t to pass over the fender
Any advantages or 6 of one?
(http://i34.photobucket.com/albums/d147/pompino/cc6b823a.jpg)
(http://i34.photobucket.com/albums/d147/pompino/00c74138.jpg)
(http://i34.photobucket.com/albums/d147/pompino/d5c4c901.jpg)
(http://i34.photobucket.com/albums/d147/pompino/9a90d994.jpg)
Quote from: rgramjet on July 20, 2010, 04:00:29 AM
Any advantages or 6 of one?
You can probably get an SBK style off the shelf.
Thank you for the pics and 'splanations!!
I think the single line to the rt caliper is what Ill do. Ill measure and check the SBK off the shelf lines........do they come with red lines and chrome fittings? ;D
Quote from: rgramjet on July 20, 2010, 04:21:32 AM
Thank you for the pics and 'splanations!!
I think the single line to the rt caliper is what Ill do. Ill measure and check the SBK off the shelf lines........do they come with red lines and chrome fittings? ;D
You bet... ;D
Late model SS is pretty much the same as is ST.
As long as you match caliper type the fittings should have the correct angle.