Print Page - Gear Selector Lever Torque Spec?

Title: Gear Selector Lever Torque Spec?
Post by: 2 Wheel Wanderer on August 22, 2010, 04:13:44 PM

Anyone know what the 5 and 6 mm screws are supposed to be set at? I can't seem ti find it in my Service Manual.

Thanks guys :)

Title: Re: Gear Selector Lever Torque Spec?
Post by: DarkStaR on August 23, 2010, 05:49:23 AM

Manual says: 10nm = 7.3756215 ft/lbs

but who torques those things anyway. [cheeky]

nice and snug is good enough.

Title: Re: Gear Selector Lever Torque Spec?
Post by: 64duc on August 23, 2010, 07:35:59 AM

Google is your friend! [beer]

http://www.dansmc.com/torque_chart.htm (http://www.dansmc.com/torque_chart.htm)

Title: Re: Gear Selector Lever Torque Spec?
Post by: 2 Wheel Wanderer on August 23, 2010, 12:25:36 PM

Thanks DarkStaR, I took a semi shot in the dark, torqued them at 10 Nm last night and buttoned up that side of the bike.

64duc I'd still be looking even if I found that page, not specific enough. thanks anyway. [thumbsup]

Ducati Monster Forum

Moto Board => Tech => Topic started by: 2 Wheel Wanderer on August 22, 2010, 04:13:44 PM